So I watched your KZbin video on these holsters and although I own 2 bins full of holsters I thought "why not" So I went to the holster site through your post. First the holsters are $59.99 not $50.00 but ok inflation is affecting everything, but then the free shipping part wasn't free, $4.99 shipping, no place to enter your discount code of "We The People" for the $5.00 discount. Idk, did I do something wrong. OOPS I just realized this KZbin post is from over 4 years ago, nevermind.

I just purchased Taurus g2c last week and going to pick it up Friday. I seen your preview and I want to thank you for a good review you gave so know I know I got a great gun.

Try the keep tinkering trigger upgrade too it's night and day compared to the extremely long pull on the stock trigger only downside is you're going to lose the restrike capability but it's a great trigger for only 25-30 bucks compared to changing out Block triggers which cost hundreds

Very, very informative video. I truly appreciate the honest critics with NO POLITICAL B.S.!

Dude !!! You're checking the trigger weight and reset in the re-strike double action mode. That's like a revolvers trigger if you don't cock the hammer first. If you actually rack the slide first like you'd be using the gun when shooting it normal like the trigger is quite a bit lighter and the reset is actually pretty decent and short. 🤦

I have a g2c i call here Nina and i run MHP Nato rounds and i never had any problems. She eats em like a starving fat lady

I pocket carry consistently for EDC using a Desantis super fly and will carry 380 or a micro 9 especially the Canik Mete 9

Do you know he was talking about how the slide scratches up real easy I wonder if you could ever send it off to get some type of coating on the slide like Smith & Wesson does to their slides. I hear that some of the best durable coating available.😊

I've had 3 of these and all 3 lasers have failed. Junk

I have a G3C in .40 caliber. I plan on the two internal upgrades that you did from Lakeline. Since I've already ordered an Olight PL-2 mini I'll see if I have the same issue that you did. I'm old school trained on holding the pistol with both hands. I haven't embraced the whole thumb resting on the slide method so I might be okay. If it's a problem, I'll put it on my much larger S&W M&P .40 I was gifted when I retired from LE in NC. All in all, I'm satisfied with my G3C even with the slight increase in recoil compared to the 9mm.

I rather have the safety switch than not any day.

Thanks for the video, just bought the g3. Have not shot it yet, but I am looking forward to it.

The issue that I see with a plate is that it blocks your natural sites. Because the hollow sun is sitting a little higher to be flush, the sites that come with the pistol are now too low.

I know this video is old but I hope you respond are the bricks needed?

"Keep tinkering" has trigger upgrades and you could check out "versacarry" or "gun and flower" for holsters that may work with the light.

Love mine...does NOT need upgrades! Rock on, shoot on! Wahi' Valleys

TRIGGER UPGRADES: It's a VOLKSPISOLE Aka VP70 DESIGN. H&Ks design of ( The Peoples pistol) Sound familiar? It's a more refined set up than the cap pistol style Glock came up with. The HK is what the Taurus uses I will look up my notes from 1987 on what we did to it at the Grant Boys Ca. It was 20x better. I'm sure I packed them when I escaped 25 years ago. I like suppressors Going through the motions to get one or eight from my local gun store. Like SBRs, SMGs. All the things you can do in free states. And California is Well, CALIFORNIA Good day to you all. No google, I said Ya'll. Like All Ya'll. No wonder the US Marines can outsmart DARPA and AI units so easily. It wasn't just embarrassing for the AI it was humiliating.

They do make the G3 series in a number of safeties with or without left or right handed or ambidextrous very few stores will carry the options. I have one set up to where the safety acts as a slide lock not a safety.

I bought a pt111 g2 in 2017. I practice pulling it out of holster and click safety off. It becomes second nature. Not that hard to draw and flip safety.

When I go to the range, I just move the Baldr forward, zero issues.

Your demostration of the triger IS wrong. You have to action the slide yo have the real triger, otherwise you get the heavier restrike heavier pull

Good video, one note: there were never election concerns, only crackpot conspiracies, so stick to facts, brother. Not a single shred of proof makes it a crackpot conspiracy, in case u werent clear.

Can u send me a site for G3c holster that can accommodate the laser Ty

Sold me on the holster! Then I went to the website and they don’t have one for my Canik. 😔 Great video though! 👍😎

Whats the best overall bullets for this

Just order a G3c od green. I really like its size. It packs a hell of a punch.

no you did not do the Vanna , that was the mana . nice holster though .

The G2c is a solid tool.always preforms well, I've had friends fire 1,000s of rounds with zero issues! subbed. 🇺🇸

I probably have about 700 rounds through mine. The trigger has a lot of take-up, but the wall is defined, the break is crisp, and the reset isn't too bad. I've had it about a month. I have a few other pistols, but this is the only one with a thumb safety so I have actually been carrying it instead of my Hellcat Pro.

You might want to check CAA under barrel picantinny for 1911 rail attachment. It's actually well built.

🤡

My problem with this light is, it moves when i fire, cant seem how to make it sit tighter on the rail.

This is one of my 3 main carry guns. I have a shield 40 for small as possible carry. A Glock 17 with a full size light and red dot. And the G2c right in the middle of capacity and size. It's perfect. Taurus still makes this weapon brand new. I'd take this over the G2c because the slide dimples are nicer than serrations for slide operation. It's really one of my favorites. I do want to replace my sights. I had an optic plate but it came loose a few times so I took it off.

If there's a hiccup with thumb safety your not training enough

Apex make a great trigger

whats a good gun belt i can wear with gym shorts or sweat pants to go with this holster?

Lake Line does trigger upgrades for G2C and G3C

Hi what is the name of the company for that holster you were reviewing?

The only thing missing in the Taurus DA/SA guns is a decocker; that would be ideal: rack, load, decock, and you are ready for a double action first round without having to remember to release the safety. Perfect.

Taurus has holster’s made for the G2C with or without the laser

Great video and information. I have a Glock 43X MOS Gen5 model. The Holosun HE 507K-GR X2 arrives with two packages of different diameter (thickness) sized screws: one set is thin at 3.89 mm, the larger at 4.83 mm. You need to use the larger diameter size screws. They will fit the thread wells on the Glock slide perfectly. The others will just spin all day. More importantly, the screws that came with the Holosun - are too long . If left at this length the screw WILL hit the Extractor Depressor Plunger Rod when you torque down at the recommended 15 inch/pounds per Holosun. I confirmed this in my initial test install. When adding the C+H adapter plate on the slide with the Holosun you'll need to remove exactly 1 mm or 0.042 thousands of an inch from the screws. This will be a two "thread" file down from the tip of the screw. I based the screw length needed from measuring the Glock's MOS cover plate - "showing" screw length - that protruded from the bottom of the MOS cover plate. Please check for yourself.

"It does have a rather long reset". I don't think I should have to tell you why that's stupid. I can see why you don't have many subs.

I just ordered 1 for $29 from magpul. I think im going to have an issue with the extra length after the holes too so i ordered 2 sizes up hoping it will reach my next belt loop. If not i will trim it and hopefully it will not delaminate. I will reinforce the frimmed end if it compromises it. And i have a leather hole puch to add loops if i went too big. I dont mind moding my stuff to make it perfect. How has it held up for you?

Ok....im 2 years late but i did do all those upgrades except for that front sight. In an adrenaline rush encounter, the front sight is the last thing im looking at. No time for that. Bang Bang first, target hit or miss, cover next, its not target practice. Oh well....just me. Fun at the range.

I really enjoyed your video, I'm truly thinking the same one for my concealed carry, I really don't want to spend over $500 for a compact.

Can I get one for my bryna SD pistol

Love the keep tinkering reset range, only downside is it takes away the doublestrike the factory trigger comes with. Easy install and like I said, makes the trigger feel like a glock’s. After that, it’s a whole new gun.

u can switch the light tightening switch either way

Thank you for the suggestions! I just ordered the same parts. Even though it’s just a cheap pistol, I think it’s worth it.

A gun in the shower? Pretty stupid statement.