VOLKSWAGEN /AUDI GENERAL REPAIRS

Пікірлер

@RoadHeros610 3 сағат бұрын

Hello I jus changed my compressor and Valve assembly the second time ..first time was success this time it is staying high in the rear will not lower the first time I did not remove valve block this time I did ..remove it what could be my issue the front responds the rear not so much

@KoKo-v9w2q Күн бұрын

Great video!!

@KoKo-v9w2q Күн бұрын

Hi , My 2017 Sharan has the front vents(driver and passenger), I have noticed that front left passenger side have hot air, front passenger right and driver both side don't give out heat , only blow cold air, and the heating is only done normal from the rear passenger side of the car. The recirculation flap under passenger side and blower motor passenger side is work normal, garage scan obd only misfire fault code, not related, is it possible the blend door actulator for driver side problem?do you think what’s wrong🙏🏻

@aliasm7154 Күн бұрын

I used a peice of pipe and hose clamps, put a 12v heater in lol

@volkswagengeneralrepairs8976 Күн бұрын

@@aliasm7154 🤣🤣🤣🤣👍👍

@maaaaatt95 11 күн бұрын

Can I get away with just changing the seals and not the clamps

@volkswagengeneralrepairs8976 11 күн бұрын

@@maaaaatt95 yes just don’t open them up too much.

@volkswagengeneralrepairs8976 11 күн бұрын

Also sometimes I just put the old seal back just make shore not to damage them cause the new ones sometimes don’t seem to fit right.

@maaaaatt95 11 күн бұрын

@volkswagengeneralrepairs8976 perfect mine came with new seals just no clamps thanks

@psydalone801 12 күн бұрын

What causes this build in intake valves? Ive seen it so this on a 23r Toyota motor i couldn't believe it ran at all

@volkswagengeneralrepairs8976 11 күн бұрын

@@psydalone801 bad gas and over time since the injectors are installed right into the combustion chamber spraying fuel right on the valves.

@mazifilms 13 күн бұрын

Which engine is this? 1.4 tsi?

@volkswagengeneralrepairs8976 11 күн бұрын

@@mazifilms 2.0 TSI.

@ammreid 16 күн бұрын

do you do suspension work (control arms)? and which part of GA are you located?

@volkswagengeneralrepairs8976 16 күн бұрын

@@ammreid yes!

@ammreid 16 күн бұрын

@@volkswagengeneralrepairs8976 looking to get control arms done on Audi a4 B8.5. but more urgently - instrument cluster replacement on a 15' Jetta...during this process, the key has to be readapted to the car. I've gotten 15min access to ODIS twice and both times, it wouldn't complete the process..maybe it's not full access to the VW servers as I thought it would be for the reason for the fail

@volkswagengeneralrepairs8976 16 күн бұрын

Sure we do everything.g.co/kgs/8uQsmuA

@volkswagengeneralrepairs8976 16 күн бұрын

@@ammreid try getting al least one hour of odis and try doing the replacement procedure with odis maybe that will help but if you are in geogia and will like to bring to me I will take care of it for you.Thanks please let me know how it goes thanks.

@ammreid 16 күн бұрын

@@volkswagengeneralrepairs8976 get an hour login time and mess around a little longer to see what happens... when I logged in before, it was pretty quick, maybe 4mins and appeared to be at the end of programming the cluster, then I got some sort of error, I'll have to check my phone for a picture of what it said. thanks

@ammreid 18 күн бұрын

What happened next..repair ecu, clone ecu, replace with new/used and program with ODIS?

@volkswagengeneralrepairs8976 18 күн бұрын

Replaced it with a used one using the ECU replacement procedure in Odis but just wanted to show how to get rid of the bracket with the tempered proof bolts thanks though.

@servo5651 19 күн бұрын

Are you handy with these valve body’s? And if so can a vacuum leak cause a c02E5/p0741 ttc solenoid code?

@volkswagengeneralrepairs8976 19 күн бұрын

@@servo5651 you need to replace the torque converter but if vehicle has high mileage around 90k I will just do the hall transmission.

@volkswagengeneralrepairs8976 19 күн бұрын

A sign for a bad heater core is scanning the vehicle in address work 08 witch is your hvac system and if there is no fault and you getting no heat or heat coming from just one side.

@volkswagengeneralrepairs8976 19 күн бұрын

This procedure will help you replace the heater core for no heat your self and make money.

@volkswagengeneralrepairs8976 20 күн бұрын

kzbin.info/www/bejne/gWOVYougq7Oob6M

@volkswagengeneralrepairs8976 20 күн бұрын

kzbin.info/www/bejne/a3rEZqSon650oJY

@zech007 27 күн бұрын

You need the plastic spacer provided on the timing chain tool kit on the bolt to prevent crank sprocket from walking out, you leave that plastic spacer in when you install the sprocket and its chains, the only time you take it off is after you install the timing chain cover as it will hold the sprocket when installing the harmonic balancer.

@volkswagengeneralrepairs8976 16 күн бұрын

thanks.

@christopherreynolds3485 Ай бұрын

Thank you for explaining it in a way that I can run outside and get this going. I appreciate it a lot.

@volkswagengeneralrepairs8976 20 күн бұрын

Plese scan vehicle and if no fault codes go ahead and replace the heater core.

@koospanther5070 Ай бұрын

The heat on my 2013 tiguan only works on the driver side. The passenger side blows cold air. Could that be the heater core that does that ?

@christopherreynolds3485 Ай бұрын

Yes, it’s the heater core. I’m currently going through the same exact thing.

@christopherreynolds3485 Ай бұрын

I have a 2013 Tig and the heat on driver side works, passenger side it does not.

@flipdamadapakincoin 22 күн бұрын

It happened to my tiguan 2014 today.. driver side hot and passenger side cold. Did you guys manage to fix yours? Can you post an update here in the comment section, because not everyone with DIY have the right tool like that vacuum tester. Thanks in advance.

@christopherreynolds3485 22 күн бұрын

@@flipdamadapakincoin I will be doing mine sometime next week when I have the time off. I don’t have the vacuum tool either but we shall see how it goes

@volkswagengeneralrepairs8976 19 күн бұрын

if no faults related to the heat actuators yes go ahead and replaced the heater core.

@servo5651 Ай бұрын

I gave up! I was trying to pull off TC and it just got to complicated with Jack stands.

@volkswagengeneralrepairs8976 19 күн бұрын

Yes they are too tough on the floor.

@MegaJim58 Ай бұрын

Great vacuum tool where did you get that?

@volkswagengeneralrepairs8976 Ай бұрын

I got it from Matco amazon should have it.Type it as: VW coolant vacuum filler.

@golson1098 Ай бұрын

Great video sir! Thank you

@volkswagengeneralrepairs8976 Ай бұрын

thanks!

@howardjordan8838 Ай бұрын

I wish I could hear what you are saying..

@volkswagengeneralrepairs8976 Ай бұрын

No sound?

@christopherkettler8727 Ай бұрын

Can you help fix mine on a Touareg 2008

@volkswagengeneralrepairs8976 Ай бұрын

I wish I could!

@frias2287 Ай бұрын

👍👍👍

@cryptoidinformation 2 ай бұрын

Thank you thank you. Doing this job currently. Saved me a lot of time.

@volkswagengeneralrepairs8976 2 ай бұрын

Cool! You’ll be fine!

@PARAKEETBUDGIEHOUSE 2 ай бұрын

easiest ecm to replace wao,do should make them all as easy to access as that one.

@SakibAhsanTamim 2 ай бұрын

Hello, "VOLKSWAGEN /AUDI GENERAL REPAIRS" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or email?

@volkswagengeneralrepairs8976 2 ай бұрын

Yes here is ok

@volkswagengeneralrepairs8976 2 ай бұрын

kzbin.info/www/bejne/pHm0cmCXZ7qGedk

@volkswagengeneralrepairs8976 2 ай бұрын

kzbin.infoYUEdxryxdO0

@cristi9944 2 ай бұрын

IT WOULD HAVE BEEN NICE IF YOU SHOWED THE METHOD OF HOW YOU TURNED THE CRANKSHAFT HALF A TURN FOR TDC OF EACH PISTON. THANKS

@3kkk514 2 ай бұрын

I jad audi a4 b7¹ cabriolet cvt, no reverse light, traction control light is on all the time, PDNR no light in dash and cvt gear shift delayed. Fault code 01315 loss communication tcm and 40409 loss communication with tcm. What do u think that cause of this. All problem appear at the same time.

@volkswagengeneralrepairs8976 2 ай бұрын

Any water leaks on driver side floor? Make shore all the fuses are good and also make shore there is no water to the control unit.

@volkswagengeneralrepairs8976 2 ай бұрын

Cheaper to do an entire engine.

@volkswagengeneralrepairs8976 2 ай бұрын

kzbin.info/www/bejne/hH-bgpeoYqx2eMk

@volkswagengeneralrepairs8976 2 ай бұрын

kzbin.info/www/bejne/Y2LPm2p9orSFfas

@danthetoolman4311 3 ай бұрын

Any mechanics in Orlando ? Contact me I need this done

@volkswagengeneralrepairs8976 3 ай бұрын

@@danthetoolman4311 really?

@volkswagengeneralrepairs8976 3 ай бұрын

What model you got?

@danthetoolman4311 3 ай бұрын

2011 Audi q5 2.0

@volkswagengeneralrepairs8976 3 ай бұрын

@@danthetoolman4311 do you want me to go do it for you?

@danthetoolman4311 3 ай бұрын

@@volkswagengeneralrepairs8976 yes

@PARAKEETBUDGIEHOUSE 3 ай бұрын

Good to know.

@fendermon 3 ай бұрын

You made those valves look like new; good job:) How many miles did it take to make that hot mess? Also, do you have any tips to minimize buildup? I have a new Subaru with GDI. Thanks.

@volkswagengeneralrepairs8976 3 ай бұрын

@@fendermon usually at around 40k using better gas and fuel additives will help a bit more but carbon built up around intake valves will have more of an impact on colder days since the valve will stick more in colder weather.Thanks for the question.

@fendermon 3 ай бұрын

@@volkswagengeneralrepairs8976 Thanks a lot, ..that helps.

@volkswagengeneralrepairs8976 3 ай бұрын

@@fendermon around 60k and try injectors cleaning additives every time you fuel at least 1/2 or full tank that will help.

@fendermon 3 ай бұрын

@@volkswagengeneralrepairs8976 Thanks :)

@mattolson3583 3 ай бұрын

Where is your shop located? I need this done!

@volkswagengeneralrepairs8976 3 ай бұрын

@@mattolson3583 maps.google.com/maps/place//data=!4m2!3m1!1s0x88f5a7453956396f:0x155a85f16cfe90a0?entry=s&sa=X&ved=1t:8290&ictx=111

@volkswagengeneralrepairs8976 Ай бұрын

Im in georgia.

@howardjordan8838 Ай бұрын

@@volkswagengeneralrepairs8976 Where in Ga are you, I am in Macon..!

@ImpendingDoon 5 ай бұрын

Terminal 4 (not sure what color) is power, Terminal 2 (brown) is ground.

@ImpendingDoon 5 ай бұрын

I checked the ground wire at the switch for continuity back to the car and negative terminal of the battery. Seems like Ground is OK. Brake lights are still on. Any thoughts on why else this is happening?

@volkswagengeneralrepairs8976 5 ай бұрын

Replace the switch at the master cylinder.

@ImpendingDoon 5 ай бұрын

Thanks for the reply. Yes, I’ve replaced the brake light switch three times. This is the third one. I had been getting the “implausible signal” error. Now I get that code and the lights stay on.

@volkswagengeneralrepairs8976 2 ай бұрын

did you check the power side?

@geeess958 8 ай бұрын

yes, new timing chain and related components, NOW, or else...lol

@geeess958 8 ай бұрын

wait, was that a valve cleaning without removal of the head or a valve job?

@volkswagengeneralrepairs8976 3 ай бұрын

Yes.

@Engine888 8 ай бұрын

I am from China engine factory, do you need?😊

@volkswagengeneralrepairs8976 8 ай бұрын

No thanks

@Engine888 8 ай бұрын

I am from China engine factory, do you need?😊

@volkswagengeneralrepairs8976 3 ай бұрын

I’ll let you know thanks.

@FredD.A. 8 ай бұрын

Fantastic

@MusclePuertoRican22 9 ай бұрын

What do you do after replacing the manifold

@volkswagengeneralrepairs8976 8 ай бұрын

Clean the intake valves and runners.

@christianivanalvarez 9 ай бұрын

Buenos días, consulta, tengo un polo trendline 2023 y me salio un mensaje que dice compruebe luz derecho de freno, pero me funcionan todas las luces, que puede ser?

@volkswagengeneralrepairs8976 8 ай бұрын

Perdona la tardansa,arreglaste el problema de la luz?

@volkswagengeneralrepairs8976 2 ай бұрын

puede que no tengan la bombilla original instalada.

@PARAKEETBUDGIEHOUSE 10 ай бұрын

note that your screen should look just like mine otherwise test will say run but it will never give an ok status. if nay question when doing this test please live me a comment and I will try to help you.

@gratefulmartingoodness3996 Жыл бұрын

Pleasant moments to you... I have a 2004 phaeton v8. Immobiliser active is on the dashboard ,no cranking sounds...

@volkswagengeneralrepairs8976 8 ай бұрын

You need to program the key to the immobilizer

@John-qw5cu Жыл бұрын

Thank you sir

@zakbrinkhoff324 Жыл бұрын

Touaregs too

Ең жақсы KZbin

Пікірлер