Project 1 - Traffic Light About the Project: The figure below shows the operation of a traffic light at an intersection. This intersection consists of two roads and four traffic lights L1, L1', L2, and L2' (L1' is always in the same state as L1 and L2' is always in the same state as L2) as illustrated in the diagram below. Additionally, there is a bus detector on line L2 which gives priority to line 2 over cars. If the sensor detects the presence of a bus on line L2, the traffic light turns green on the L2 side and the other side must be red. For this project, you must submit: A flowchart representing the operation of the traffic light including the bus detector. A simulation of the operation on the LOGO! Siemens Soft Comfort software. I need solution of this exercise
@admiraldante8015Ай бұрын
what is your email, I really appreciate your work, I would like to ask you something by email
@DieudonnéJuniorNSATOUАй бұрын
Project 1 - Traffic Light About the Project: The figure below shows the operation of a traffic light at an intersection. This intersection consists of two roads and four traffic lights L1, L1', L2, and L2' (L1' is always in the same state as L1 and L2' is always in the same state as L2) as illustrated in the diagram below. Additionally, there is a bus detector on line L2 which gives priority to line 2 over cars. If the sensor detects the presence of a bus on line L2, the traffic light turns green on the L2 side and the other side must be red. For this project, you must submit: A flowchart representing the operation of the traffic light including the bus detector. A simulation of the operation on the LOGO! Siemens Soft Comfort software. I need solution of this exercise
@nadeemiqbal28752 ай бұрын
May I ask why did we use the AND with Edge
@heatbilgehan2 ай бұрын
Thank you Sir
@FattahFattach4 ай бұрын
Isn't working
@PLC-Channels4 ай бұрын
As you saw in the video, the circuit worked. Maybe your wires are disconnected
@didierkwizera68645 ай бұрын
Tell us the common problems we may face??
@PLC-Channels5 ай бұрын
This video teaches traffic control in a street. In case traffic control is required in at least 2 streets.
@DandyHrl5 ай бұрын
What's the name of the Aplication ?
@PLC-Channels5 ай бұрын
cade simu
@hiranchathuranga43695 ай бұрын
My logo i not simulation why it happened
@PLC-Channels5 ай бұрын
cade simu software
@phucchanhcho15816 ай бұрын
good cái chó j
@kelvinlimata7 ай бұрын
Well appreciated
@RAIMUNDONONATO-fp1nd8 ай бұрын
me envie um diagrama desse pra treinar
@39Jhahapilie8 ай бұрын
Thanks this saved me from 3 hpurs from school
@ILYASBENDJEFFAL8 ай бұрын
what is the difference between Toff and extended pulse timer
@ILYASBENDJEFFAL8 ай бұрын
actually because of you now i see the difference when switching the input from 1 to 0 the Toff start counting but for the extended time pulse making the input 1 is enough to stat counting else everything is similaire
@ILYASBENDJEFFAL8 ай бұрын
fast and efficient thanks
@Constrain1239 ай бұрын
Make videos on soft comfort software
@janjanmilano56579 ай бұрын
Why in my version i dont have a tail or another connection in the right side of the edge triggered wiping relay and NAND edge? Thank you for the response :)
@keastontejada606910 ай бұрын
"Promo SM"
@AnimeHub_m4A110 ай бұрын
can anyone tell me whats the pupose of this??
@PLC-Channels10 ай бұрын
Learning the logo
@rlarose13410 ай бұрын
When it reaches the last output how do I get it to change direction to turn them all back off? Do I connect the last output to Dir ?
@maulanawahyudi712710 ай бұрын
How to use counter in FB as parameters, so i can use repeatable FB
@IFrez. Жыл бұрын
Tqsm
@houmadiamaldine Жыл бұрын
what is the name of this application diagramme please @plc
@PLC-Channels Жыл бұрын
cade-simu
@houmadiamaldine11 ай бұрын
think you @@PLC-Channels
@houmadiamaldine11 ай бұрын
can you send me the site to download please
@houmadiamaldine11 ай бұрын
can you send me the site to download please@@PLC-Channels
@PLC-Channels11 ай бұрын
cade-simu.en.softonic.com/@@houmadiamaldine
@pars8905 Жыл бұрын
very good
@PLC-Channels Жыл бұрын
Thanks
@zahraouni5140 Жыл бұрын
Tnks for this video❤
@PLC-Channels Жыл бұрын
My pleasure!
@salaheldineghennai7743 Жыл бұрын
great, can you tell me what we use this for?
@PLC-Channels Жыл бұрын
For example, we define a range for the counter so that it outputs the lowest and highest values.
@DavitSOS Жыл бұрын
Thank bong🙏
@PLC-Channels Жыл бұрын
Thank you too
@BrianRHeard Жыл бұрын
Nice video, can you tell me where to get the working traffic light images please?
@najmurrahmaan1275 Жыл бұрын
what software r u using?
@PLC-Channels Жыл бұрын
simatic step7 for siemens plc
@najmurrahmaan1275 Жыл бұрын
thank u @@PLC-Channels
@alltime4715 Жыл бұрын
❤
@dak4482 Жыл бұрын
Hi, great videos. I would be VERY interested in a video that features the emulation of different types of relays such as those in the railroad and traffic industry. such as polar relays, slow and fast acting relays, and neutral relays. There is an absolute lack of these and would very much like to see this area covered.,,,Dan
@PLC-Channels Жыл бұрын
Thanks for the idea!
@redkraken4778 Жыл бұрын
Thank for explanation
@PLC-Channels Жыл бұрын
You are welcome
@joselopez-he9mp Жыл бұрын
Maestro ...¿como se puede asignar ese codigo bcd generado a las salidas fisicas discretas del automata?
@andreacolognese94 Жыл бұрын
I don't clear understand why we need the memory. Could you explain? Thanks
@18837ven10 ай бұрын
I believe in older versons recursion was only allowed through outputs or memeroy blocks. I'm on V8.4 and I can do recursion straight out of a NAND block without having to use a memory block in between
@sezaikamer6737 Жыл бұрын
Thank you
@PLC-Channels Жыл бұрын
You're welcome
@aryaskurd1855 Жыл бұрын
Software??
@PLC-Channels Жыл бұрын
step7 simatic manager
@najmurrahmaan1275 Жыл бұрын
what software r u using ???
@PLC-Channels Жыл бұрын
step7 simatic manager
@melisamako602 Жыл бұрын
Thanks😊
@PLC-Channels Жыл бұрын
Welcome 😊
@PowerAndControlEng Жыл бұрын
❤❤
@ahmedhossam2927 Жыл бұрын
What is the namr of this software
@PLC-Channels Жыл бұрын
Simatic Manager Step7
@mcfly_consulting Жыл бұрын
great demo. Will be using this to read a BCD value from a sensor. teaching myself plc programming!
@PowerAndControlEng Жыл бұрын
Thanks you , can you make some other video about Logo ❤❤❤
@PLC-Channels Жыл бұрын
Yes, soon
@POWER_OF_TECHNOLOGY643 Жыл бұрын
Yadi aap ko batana hi ha to voice do video main otherwise not good sir this video
@crisentebecare9707 Жыл бұрын
What happen in apps the PLc outpot indicator not working