Thanks

Great video can't wait to try it!!

You are actually supposed to fire those bear bangers straight up in the air as per the website.

Akkar actually is a very repudable company in Turkey. It is one of few companies that produce in all gauges.

No 12 guage shotty? 😊😊😊

Que es lo que tiene el mango en la punta

I got a non working one for $20 from a yard sale about a month ago, after verifying continuity of the primary and secondary windings and the shunt, I replaced the fan with a larger more powerful one for better cooling and I replaced both leads with a larger gauge wire that was longer for less resistance and more versatility, I replaced the ground clamp and installed a "real" electrode clamp for better connection and electrode control, i also replaced the power cord with a longer #10 gauge conductors while maintaining use of a 20 amp NEMA plug end and just for the heck of it, I converted it to DC by installing a 600v 100A bridge rectifier (the only part I did not already have on hand and had to buy for $13). Does it work? Using the 6011 rods, with the shunt set at maximum, I will say, "So far so good"... L8R G8R :-)

The wood shouldn’t be flush with the eye. The pins should be perpendicular with the force on axes and at an angle with mauls and hammers. But most concerning is the face of the head isn’t perpendicular with the handle when you mounted it. Why post if it’s wrong?

Very helpful information. Thank you.

I due stump grinding and ground based tree & and land clearing & excavation work an already blew out a pair of Pittsburg Keens and they gave me a credit to replace them - I was looking at these as a bit more HD plus 8” tall for better ankle support & less chips in my boot - 7yrs old vid and still getting views👍🏻

are those parts at 5:55 just to make it fit extra tight?

I'm headed to the hardware store tomorrow to buy an Axe. Just because of this video.

Cool but not useful

If you replace the handle do so with ironwood. Hard to work with,but strong as hell.

Well ya I guess that works, if you’re going for bare minimal effort. ie: it’ll do the trick, but looks like ass

Hi! Great review!...I specifically wondered if it had the dual action bars? So thanks for pointing that out! However...as another commenter has mentioned too..the Mossberg Maverick 88 DOES! Have dual action bars too! AND! The 500 Mossberg also does too! :o) Perhaps you could edit the video?..and not misinform folks about these important features? Again! though! I like your video! excellent smooth & clear, and in focus camera work..and nice clear audio as well! You covered this Firearm excellently! ( Other than the dual action bar boo -bo on the Mossbergs ) Thanks! 👍🙂

Great choice of music. I usually silence vids like this

😂 Fiskars tupit

Can you still buy one with shit freeze on guns laws!?

The problem you're having with that gun is likely due to a weak slide release spring (aka carrier release spring). Replacing it with a considerably stronger spring will likely fix the problem of the shells opening the action after firing. Call the manufacturer and see if they will fix it for free.

Made in 🇹🇷

Is he playing "CLUTCH "?

Nothing beats a wooden handle and normally one doesn’t over strike at least not bad and the wooden handle is perfect plus unless you hang the head you don’t know for certain what the wood really is

Never seen a Maverick 88 with a single slide bar 😅😅

I'm curious why you chose a step wedge rather than the barrel wedges that came with it?

Nice vid 👍

Put in bucket of water for 72 hours

I LOVE the background music. What is it called and who's it by????

Timber!

I learned a few things from this, even though I was not doing it wrong, sometimes, there’s a better way. Never stop learning.🤓

Nice shotgun, I got one in black. Shot my first Grouse with it last weekend, awesome light weight but powerful weapon for sure.

I love my MAUL AND IT DOESNT HAVE A WOODEN HANDLE

I run 3" slugs with the birdstock on mine with one hand!

I'll take this as a testament to how tough a Fiskars can be. But i still love me a nice shaped piece of hickory for an axe handle.

Is that a Merlin welder? Have you tried to use 7014 rods?

Where’s this location ?

Where is that

Watched this and replicated with remington pest controller and works like a charm. From a long pull to hair trigger, accuracy improved. Thank you for the video.

Just picked one up hours ago $80 Canadian lol and I am have a B of a time welding lol

Hey man is it possible to PM me the general area you are in? I know how to use the crown land map I have been searching for a long time and all I find is swamp and its extremely annoying walking hours through thick woods just to end up in 7 foot swamp. I just wanna shoot a couple times a year.

put some wax on your saw blade, trial fit the axe head, shave handle until you have minimal wood curls. don't be using a metal hammer on wood, use a mallet or hide lump hammer or at least synthetic _bleh !_ headed mallet. good to check handle heel is chamfered, makes it less likely to splinter. All credit to Billy Ray.

THANK YOU VERY MUCH FOR TAKING THE TIME TO GO THROUGH SIGHTING IN YOUR CROSSMAN. IT REALLY HELPED ME A LOT AND NOW I'M RIGHT ON TARGET 85 % OF THE TIME GETTING RID OF GROUND SQUIRRELS THAT HAVE MOVED IN. THE THINNING PROCESS HAS STARTED. THANKS AGAIN

The music is too loud and I can't hear you talking.

Where can I get that sharping tool, I’ve got me a bigboy silly saw. Not sure what’s good to use

The song 🗣️🗣️🗣️🗣️🤞🏿🌄

Just curious if you ever got the tree down yet not using the blade…😂😂😂😂😂 I have a broken Ludell plastic fiberglass axe handle sitting in the corner and I just prefer hickory but I try to use the blade My son on the other hand seems to do it your way😅😅

Great Vid!! Oooo goodie... just bought one, my first gun, and now I'm prepping for a sore and bruised shoulder... HAHAHA!!

I’m looking to go target shooting on some crown land and I found some just outside Algonquin, in the district of parry sound, do u now if I’m able to target shoot there, as long as it is general use area it should be fine right?

Wow... just wow.

And no glue or anything is required?