So does the Oneida Supercell have a HEPA filter? How can you actually shake the fine dust out of the filter?

I’ve had the same saw for years and have a splitter on the two dust ports and the same dust right hose that I move from tool to tool. Note that the hose is larger than 4” so you need to mount the adapters on to any 4” port you want to use move the hose between. Works great.

Is that the 55-gal. drum on the Oneida Super Cell; rather than the 35-gal. drum?

2:45 why are they trying to kick the little guy???

Mumbler

Bunch of tools

ย

Hanzhen harmonic drive gear , over 30 years experience ,,robot arm gear

I have the same band saw. Works ok. I recently heard it will do better with one port, and other taped close. But it seemed to be same resawing a 10 inch board. Again, try the mag port. It’s amazing.

Thanks for this review. I’m about to connect my supercell to a new 20 inch jointer planer and I’m concerned. BTW I find that dust right handle lost a lot of suction for me. you might want to try the mag port system, really amazing, Better fit. I have no affiliation with these guys, I just love the stuff. Have you run a single 20 inch wide board or two 10 inch boards through at once? I’m wondering if a lighter cut will help reduce chips, too. Also, is your planer spiral or straight knife? I’m going for some tersa blades. My neighbors are not going to be happy with noise so I’m working on some noise control, too.

Hanzhen harmonic drive gear , robot gear

Hanzhen harmonic drive gear , over 30 years experience in industrial robot arm gear reducer, factory automation , joint gear

You'll get a huge increase in CFM if you use less flex hose. What you're running is quite extreme, just so you know.

how well does the supercell work when you resaw on the bandsaw?

Would have been interesting to see how dirty the filter was after you finished. Assuming you did not clean it during the planing session?

ترکیب کیمیا حاضر ہے .

Thanks for the video. Were you emptying based on the bin fill sensor, or just checking periodically? Do you have a table saw? I'd be very interested in how it does--specifically whether it is able to collect both from above the blade and below. (it seems like it might do very well if dedicated for a blade guard collection)

How is the sound on the supercell? I'm a bit worried it could be a nuisance compared to the low pitches hum of a traditional DC

Really great info. I'm considering the supercell for my shop. Thank you.

I have an 18bx in order and am looking at upgrading my dust collection so I appreciate your video. Any chance you’ve done a comparison without dust collection hooked up just to see how much dust you’re actually picking up?

Good to see it works soo well. I’d wonder is drilling a few small holes in the throat plate would help at all.

*** *slaps top of hydraulic arm* *** _"This bad boy can sink so many hoops."_

About the basket ball....hows the programmming done🤔

Sudden day tomorrow

OK but robots dont eat...

UBI now pls lol

What kind of programming languages are used to operate such machines? How to learn it?

kzbin.info/www/bejne/qp-uaGyFn7hjpNE KUKA ROBOT FOR GREEN TYRE LOADING

Did Skynet have a booth?

Job killers coming to a city near you.

None of the tasks the arms were doing were particularly difficult.

Já que não se pode escravizar humanos , vamos para as máquinas...

Putting snow flakes in their place since 2019

Robot learning the surroundings

I see robot people

That part with those 9v batteries is very cool. Random batteries coming in, one robot puts them very quickly in a randomly orrientated row, and the next robot knows the random orrientation and picks the whole row up. Must be fun to program :)

8:22 So that’s why my weedwhacker runs like shit.

робота от 1:00 къде подрежда батерийките ряпа да яде, знам за човек, къде е по бърз

Universal Unison's Unity For All In Useing Our Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw60-50khz SO's Morse Coded Singles Special Spinning Spiraling ElectricalAccelloerative And Transending Electro Magnetic Reverse Mechanical Radiocyclewaves International Ultra Super SONIC Transmissional Planetary Programmed Environmental Industrial Radios Cncs Automated Reverse Mechanical Robotic Machines To Labour Nuclears Diffusions Disarmaments Kind and Also Deccomissioning Dismantlement and Safe Kind Desoseals of All Military and none Military Machines and Weaponry Systerms.Use Universal Unison's Unity Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw60-59khz Sos Morse Coded Singles Special Planetary Programmed Defence ENVIROMENTAL Robots for Solar System Sistamatic Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw60-50khz Sos Morse Coded Singles Special Planetary Programmed International Ultra Super SONIC Transmissional Radios Cncs Automated Reverse Mechanical Robotic Machines for Dismantlement Disarmaments Deproductions Dessemblements and Safe Kind Desoseals of All Nuclears Military and none Military Machines and Weapons Globally.Very Important Universal Unison's Unity For All Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw60-50khz Sos Morse Coded Singles Special International Ultra Super SONIC Transmissions Kind To Which We Can All Receive Globally On Our Universal Unison's Unity Orbital's Harmonious Satellites Operational Shortwaves Frequencies International World Band Radios Bush Roberts Tecsun Samsung Mittebishui Or Any Good Universal Unison's Unity Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw60-50khz Sos Morse Coded Singles Special International Ultra Super SONIC Transmissions World Band Servicing Radios.I First Called These Universal Solar Moon Cosmic Galaxies Planetary Wonderful Orbital's Harmonious Satellites Operational Shortwaves Frequencies Sw6-50khz Sos Morse Coded Singles Special International ENVIROMENTAL Transmissions Magnetic -Vacuum-Diffusion.Fast Strange Distinct Unusual Metal Vibrant Defused Deactivated Unreverting Dissembling Dismantling and Mechanically Desposeing Radiocyclewaves Patterning Sounds Transmissions in Mayday14th 1962 When I was Four Years Young Having Looked on In Silence at The Tears Niap Upsets Heartbreaks of Events Before My Own Birth Into This World .All Our Yesterday's Tears Sympathy Looking On at World Wars1One and 2Two Myself Forever Against.Have a Nice Day Enjoy And Hopefully You May Labour With Universal Global Environmental Wonderwaves Magnetic Vacuum Diffusions Born in Defence and Labouring Myself In Defence of All Globally Universally Kindly So!Thanks😅😉😷😏😑😊😄

RESPCETED ÀBB ROBOT MANUFACTURER I WILLING TO LEARN FOR SERVICE (AS COMPANY SERVICE Er.)

мдамс вот где технологии

Universal Unison's Unity For All In Making Orbital's Harmonious Solar Moon Cosmic Galaxies Universal Planetary Satellites Operational Shortwaves Frequencies Magnetic Mechanical Levitating Automatic Hydraulic Weaponry and Military Machines Flight Vehicles Lifting Arms Into Universal Unison's Unity For All In Orbital Harmonious Satellites Operational Shortwaves Frequencies Sw160khz Sos Morse Coded Singles Specials Spinning Rotating Ultra Super Sonic Sounds Light Energised Planetary Programmed Reverse Mechanical Radios Cncs Automated Robotic Nuclear Diffusionds Disarmsments Decommissions Disasemmblements and Disposals of All Military and None Militsry Machines And Weapons Globally Spaceships Flert100 In Kind Universal Unison's Unity For All Orbital's Harmonious Satellites Operational Shortwaves Frequencies Transmissions Planetary Defence and Disarmsments Flight Environmental Services Kind.Magnetic Vacuum Diffusionds In Defence and In Disarmsments Kind Globally Universally.😅😍☺️🙂😊😆😪😌😶😓😛😊☺️😅😄🐵🦊🐴🐎🐱🐒🦍🐈🦌🦄🦁🐶🐕🐯🐮🐂🐅🐩🐺🐆🐃🐑🐁🐀🐐🐄🐷🐪🐹🐰🐫🐖🐗🐘🐇🐿️🦏🐽🐏🐭🦇🐓🦅🦆🐣🐻🐨🐤🦉🐸🐥🐼🐾🐦🐊🐢🐧🦃🐔🕊️🦎🐟🦐🦑🐠🐍🐲🐡🦋🐌🦈🐉🐳🐙🐛🐜🐚🐋🐬🦀🐝💮🌷🐞🏵️🌱🕷️🌹🌲🕸️🥀🌳🦂🌺🌴💐🌻🌵🌸🌼🌾🌿☘️🍀🍁🍂🍃🍇🍎🥝🥑🍏🍈🍉🍐🍆🥔🍑🍊🍋🍒🥕🌽🍓🍌🍍🍅🌶️🥖🍟🥒🍄🥜🌍🌎🌏🌋⛰️🗻🏔️🏞️🍃🍂🍁🍀☘️🌿🌾

😍😍😍😘😘😘

Gudel😂😂😂😂👍👍👍👍👍👍

Not much to see, there, just the same three stands over and over again with different coloured machines. The only ones that grabbed my attention as something interesting were the hand and the 3D printer.

So did FANUC really steal the show with so many demos, or are you biased towards the yellow guys? ;-)

best

2:52 Honestly, I believe this guy is playing an online game instead of working^^

these are taking your jobs not the illlegas so stop bitching when your in the unemployment line while these machines qre put on the production line meanwhile they are made to last longer and the products they maufacture break easyer so youll just go buy another with your unemployment check what a scam from big corporations.

10:46 russian hackers