3:48 For the connectors to the heating element... it really doesn't matter which one goes where, it will work either way

looking to replace the 'molded piece' that everything (temp & fan setting dials with cigarette lighter) fits into. The 'molded piece' holds the cup holder when stowed up. I broke one of the 2 tabs that hold it in place, that it pivots on...

Wish I could find a tutorial on removing the ENTIRE SIDE VIEW MIRROR ASSEMBLY.... Can't believe this is nowhere to be found

.Aq

U never showed how u put the 2 pieces together. I'm stuck 😂

I did this today for the very same reason. It worked, but I had to crush the old lighter to get it out. Good thing I purchased a new lighter along with the new bezel. I did not have to remove the armrest console to do this. Thanks for the guidance!

Why does every video start off with the mirror already removed? Show me how to do that part

Is this the same as a 2016 Yukon?

How do you take the face off

The Side pieces where he said the screws will be , you can yank on them and pull them back . because there's a screw in the front , but as it goes back , it's just clips . That will give you room to put leverage on both sides and use something to crank it

Hi give me visa

I have the same dryer but my drum sounds like its off track sometimes. Do I need to get another one?

THANK YOU for leaving the camera rolling while you struggled with it. Too many times on YT i am watching to figure out how to get past a difficult step and the content creators edit out their struggles, skipping straight to: "this was really hard, but we finally got it out"

Can I remove just the lid? I got something stuck behind the lid of the ashtray and cannot get it to close

I want to see it done No way it comes off that easy I’m a grappler with a pretty good grip and couldn’t get it to budge. I guess I’m a 🐈

Title of video lacks car model, video opening sucks

Great video and very informative...! I have a 07 Ext Escalade and the mirror on the drivers side will fold in and out and the adjustment on the right to left works however the adjustment on the up and does nothing... any ideas?

Did you watch all those springs fly off.😮LOL Good job!

I know you’re probably not gonna see this, but what color is that trim?

Incredible performance Jackson!

My chronically online friend is there!!

my entire mirror is loose. not just the glass. im assuming its loose on the swivel part. how do you think i can tighten it? does it need to be tightened? whats wrong with it? ps: motor OCCASIONALLY collapses with the switch in the door. 95 percent of the time it doesnt shut

My husband and I thank you! Watching you struggle too gave us confidence we were at least doing the right thing and BAM! Done deal! Whoooop

Hi my name is walter! And this video was so helpful thankyou! I need that for my passenger side.

Can push close my power mirror

where do i get the mirror mount

FYI for viewers. The actuator screw size on mine was a T10. Thanks for the video. It was very helpful.

Thanks for posting this video. I was finally able to feel confident enough to take my unbroken driverside mirror off. The heating element wouldn't get power because of corrosion on the two terminals on the backside of the mirror. I was also needing to tighten up the mirror somehow and it was those 4 screws holding in the motor to the back plastic frame of the mirror housing, that were loose.

I couldn't keep watching. His fake laugh is so annoying. Plus he doesn't even tell you what year and model his Escalade is

Grabbing cantaloupe at the end

Thank ya!

Would have been good to start with removing the mirror...

I been trying to buy this part from the GMparts but they will only sell me the whole assembly which is a bunch of crock. I hate this, i just need the same part you bought.

I mean, I think most people can find instructions online. People come to YT for VIDEOS of the process.

Jesus Christ luvs us all 💜

What car

I will only say the mirror doesn't come off extremely easy. FYI push or lift up toward to top of the mirror from one of the top corners to get it out and be patient and take your time.

The clips on my motor assembly are broke idk what part I need

Hi preston. I have a question regarding this dryer.

Maybe if you weren’t vegan hahaha

Thanks

Thank you so much for the video every place I took this to told me I needed a whole new mirror assembly and you just showed me how to fix it for myself in 10 minutes with a $50 part

I wonder why you would have to fix this I definitely didn’t have any part in why it broke

Nice camera work I wonder who did that he sounds really cool

i want more videos. love the channel

Well I learned something new today

How did you get the old mirror off? Thx

💯 He almost looks like Richard Gere

For anyone having trouble with this method, I've found another technique which works very well and only requires a flat-head screwdriver and hammer. The Crescent Miniature Wire Cutter simply sheared off my rivets, perhaps because the 2020 version of this tool is sharper/harder than the one used in this video, or because the rivets in my MBP were made from a softer aluminum. Either way, read on for an alternative which was super easy and allowed me to remove every last rivet in under 10 minutes (except the ones I had already sheared with the wire cutters). Basically, you want to take a flat head screwdriver and position the tip at the base of the rivet. Orient the handle of the screwdriver such that it's as close to being perpendicular with the rivet as possible (imagine an uppercase "L" where the vertical part is the rivet and the horizontal part is the screwdriver). Then, give the handle a few successive hits with the hammer and the rivet should pop right out. Not much force should be necessary. You'll also need to place the laptop against a padded backstop to keep it from moving. Credit for the idea goes to the video below. However, unlike in this video, be sure to keep the screwdriver as close to perpendicular with the rivet for best results. Also, a big thank you to Preston for sharing his knowledge. Though it didn't work for me, it did lead me to a solution which did. kzbin.info/www/bejne/e4XboZmPZ9Obes0

Thanks and respect !