How I Did This

Пікірлер

@daughterofyah7476 2 күн бұрын

Why does the old code continue to work?? The new code works but I wanted to get rid of the old code.

@howididthis 2 күн бұрын

Thanks for watching & commenting. Seems like on some systems the work around is: you need to Press & hold the learn button on the MOTOR until the LED goes out. That should reset all the devices. I don't know to erase just one device

@CacheMundy 6 күн бұрын

Much appreciated

@howididthis 6 күн бұрын

Glad it worked for you too. Thanks for watching and commenting. What was the tricky part for you?

@Anakele20 7 күн бұрын

Thanks. I'm in a Drs office and I think it was set for a minute. They had no idea how to change the setting. I can't wait until the Dr. comes back and learns that I "fixed" it. Not all heroes where caps. Thx a million! 😂

@howididthis 6 күн бұрын

Thanks for watching and commenting. Love it! You just turned a doctor’s visit into a tech triumph. 🏆 Haha, that’s fantastic! Not all heroes wear capes, but they do know how to program motion switches! 😄 Have you had any other unexpected tech adventures lately?

@AndrewWagnerUSA 9 күн бұрын

Son of a… almost smashed this thing into a million pieces trying to get this into my trunk, thanks!

@howididthis 8 күн бұрын

Phew, that was a close one, @AndrewWagnerUSA! 😅 Thanks for the feedback. I’m glad the video could help in the end. What was the trickiest part for you? Appreciate you watching!

@orchidgrill44 9 күн бұрын

Why is this one button code so hard to find? All the videos on this this key pad and no one talks about how to enable one button close?? Thanks for the info-

@howididthis 9 күн бұрын

You are welcome. Glad it helped you too. Thanks for watching and commenting.

@kimstephens5882 10 күн бұрын

Thank you! Perfect video for what I needed.

@howididthis 9 күн бұрын

Glad it helped you too. Thanks for watching and commenting.

@VevoKIlledUtube 10 күн бұрын

Thanks

@howididthis 9 күн бұрын

You are welcome. Thanks for watching and commenting!

@s.elizabeth1753 14 күн бұрын

It's so awkward

@howididthis 13 күн бұрын

Thanks for watching and commenting. I made it look more awkward than it is. I did not have the brakes on. When you do it a couple times it becomes more fluid. 😃

@toyotabrony 14 күн бұрын

I would rather upgrade with sylvania zevo 7443R led bulsb instead of

@howididthis 13 күн бұрын

Thanks for watching and commenting. Will try that the next time one of them blows. These last a long time, so not sure when that will be 😊

@toyotabrony 13 күн бұрын

@@howididthis in my experience. My original oem 7443 incandescent bulbs lasted 6 years. And by little touch one of the filament burned out. I would do that again. The zevo red led bulsb will last over a decade. I can promise u that. It’s not the brightest one but it’s not supposed to be. It’s design for replacement for increasing reliability and longevity, and will not loose brightness overtime.

@howididthis 13 күн бұрын

I added a link in the description so anyone who is interested can buy the Sylvania LED bulbs and provide their review for us. Thanks in advance.

@robertoramiro4729 29 күн бұрын

You don’t do a damn thing in your video but shredding papers and it’s working but why isn’t working in the first place???

@howididthis 29 күн бұрын

Thanks for watching and commenting. I agree. At the time of the video, I was SEARCHING for a response on how to fix the problem. That is the reason why the title was written that way. I did not know what caused the problem. I tried the shredder lubricant, using pressurized air to possibly blow out gunk or remove a jam, among other things (all while cussing a blue streak 😇). None of which worked. MY FINAL SOLUTION: Finally, I got rid of it and purchased a new one.

@RafDoggy Ай бұрын

Great video! Thank you

@howididthis Ай бұрын

You are welcome! Thanks for watching and commenting.

@mariosaintfleur7286 Ай бұрын

I needed this

@howididthis Ай бұрын

Glad it helped you too. Thanks for watching and commenting.

@BurntOakSix Ай бұрын

Thank you! For the life of me I could not figure it out LOL

@howididthis Ай бұрын

Happy to help! It totally pissed me off the first time also. Thanks for watching and commenting.

@robertovicenca7000 Ай бұрын

Thanks for your help 😊

@howididthis Ай бұрын

Happy to help. Thanks for watching and commenting.

@thelifeofcollinrs6030 Ай бұрын

And spill it all out? But no explanation on how it’s saving you money?

@howididthis Ай бұрын

Thanks for watching and commenting. In this video I show the reason for removing the pouring spout when the container is almost empty. I was able to do 2 loads of clothes with the amount that I got. Use all you paid for! #shorts kzbin.infoOa09NvUZW4o?feature=share

@SkylineP619 2 ай бұрын

❤

@howididthis 2 ай бұрын

Thanks for watching and commenting

@kyolite5357 2 ай бұрын

NO WAY REALLY???

@howididthis 2 ай бұрын

Thanks for watching and commenting.

@dexterian477 2 ай бұрын

I'm flabbergasted! 😮

@JT-qf3xg 2 ай бұрын

Omg you just have to remove the screws?

@basedghostcoasttocoast 2 ай бұрын

Tuen your wrench the right dorection and it's easier and less likely to break off that adjustable piece

@howididthis 2 ай бұрын

Thanks for watching and commenting.

@cjeny7039 2 ай бұрын

Couldn't see what you did

@howididthis 2 ай бұрын

Thanks for watching and commenting. Using the pliers, I adjusted the latch to be tight enough.

@cjeny7039 2 ай бұрын

Thank you, I just fixed my mailbox that wouldn't close. You're a life saver❤

@howididthis 2 ай бұрын

Awesome, Glad it worked for you too.

@Wardcreek 2 ай бұрын

Yup that handle loosens on my electric edger and it’s a pain in the ass to tighten! I’m looking to get that special “longer” handle so I can walk straight without bending!

@howididthis 2 ай бұрын

Thanks for watching and commenting. In the description for the video, I put links for other handle options. Let me know when you get the longer handle if that helped you more. Stay Well.

@Wardcreek 2 ай бұрын

The handle is a POS

@howididthis 2 ай бұрын

Thanks for watching and commenting. What happened with yours?

@Wardcreek 2 ай бұрын

The handle keeps slipping around, I can’t get it tight!

@howididthis 2 ай бұрын

Will check it out on mine tomorrow.

@howididthis 2 ай бұрын

I checked mine and created this video (kzbin.info/www/bejne/a2GlYYCZftKVhMU) on how I adjusted the handle. Please let me know if that is what you were referring to and if the video helped.

@vannesavasquez2475 3 ай бұрын

THANK YOU!!! We were going to pay an electrician $300 to do this!

@howididthis 3 ай бұрын

Wow! $300 😮. I am happy you found a $0 solution here. Thanks for watching and commenting. You made my day!

@corey6393 3 ай бұрын

I've found a blowtorch works well, but this method will be much less stinky.

@howididthis 3 ай бұрын

I did not think to use that. Not sure it would have worked out well for me. 😂Thanks for watching and commenting.

@georgeosborne557 3 ай бұрын

can't believe there is a video for this 😆

@howididthis 3 ай бұрын

Thanks for watching and commenting. 😊

@Salmon_Rush_Die 3 ай бұрын

I needed this 6 months ago.

@howididthis 3 ай бұрын

Thanks for watching and commenting. How did you remove the packaging 6 months ago?

@peterrudy9207 3 ай бұрын

Have a long spark plug socket , with this . I used a slotted small head screwdriver in those slots and came out easy .

@howididthis 3 ай бұрын

Thanks for adding another way to get it done.

@falsedfaith69 3 ай бұрын

Good to know 😃

@howididthis 3 ай бұрын

Thanks for watching and commenting

@GunnerStrauser 3 ай бұрын

you mean I've been raging at these things for years and never even tried reading the tiny packaging print

@howididthis 3 ай бұрын

Glad it helped you also. Thanks for watching and commenting. The only reason I never had this problem before was, I had a full socket set until I somehow misplaced one of the sockets. Sadly, the print is tiny and fuzzy and NOT clear as to what you are cutting.

@russriley3005 3 ай бұрын

I wrote Stanley tools about how to get the box knife out of the package. they told me to use a box knife, but my box knife was stuck in the package. they later said they couldn't help me

@howididthis 3 ай бұрын

Classic (annoyed) - Which came 1st, the chicken or the egg. Seems like the help desk needs help. Thanks goodness for KZbin University

@luetro 3 ай бұрын

i have confirmed that this also works on a chamberlain garage door opener

@howididthis 3 ай бұрын

Thanks for watching and commenting. Good to know, thanks.

@howididthis 3 ай бұрын

Thanks for watching & commenting! If you liked the video, give it a THUMBS UP & PLEASE SUBSCRIBE :) SPECIAL THANKS TO MY SUBSCRIBERS - you are the BEST!! Your support means a lot! THANK YOU

@PoojaDoval 3 ай бұрын

Thanks a lot. Their stupid manual was written by a bunch of idiots. I got the answer from your video. Fuck those graco guys

@howididthis 3 ай бұрын

Glad the video helped. Thanks for watching and commenting

@angiec8487 4 ай бұрын

I had such a difficult time attaching the trimmer. It was not easy at all.

@howididthis 4 ай бұрын

Thanks for watching and commenting. The first time I tried putting it together I was not happy. I couldn’t get the base off 😊. What gave you a difficult time attaching the trimmer?

@ABean56 4 ай бұрын

Why are they different sizes?

@howididthis 3 ай бұрын

According to the Samsung Site -The filter required for your refrigerator will differ depending on the model you are using.(www.samsung.com/ie/support/home-appliances/how-can-i-find-out-which-filter-to-use-with-my-samsung-refrigerator/#:~:text=The%20filter%20required%20for%20your,on%20the%20lower%20left%20side.)

@brynachhogan8952 4 ай бұрын

Interacting with this so maybe more people see 😅

@howididthis 4 ай бұрын

Thank you

@grrjessiebear4275 4 ай бұрын

Going to be a first time mom in November. I’m home alone and trying to get this thing to open, the pregnancy brain was getting to me 😭 thank you helped me out so much!

@howididthis 4 ай бұрын

CONGRATULATIONS 🥳 🎉👏🏽. Wishing you all the best. Glad it helped you. Thanks for watching and commenting. Stay Well.

@Toastmyheart 5 ай бұрын

Thank you so much this really helped new subscriber 😅❤❤😊

@howididthis 4 ай бұрын

Glad it helped you. Thanks for watching, commenting and subbing!

@Toastmyheart 4 ай бұрын

@@howididthis your welcome I subscribed

@KevinFrost 5 ай бұрын

I have the LiftMaster 878MAX and I've tried this but it doesn't seem to enable the feature. Is there anything I need to make sure I'm doing? Does the door need to be open/closed? Do I have to wait a specific amount of time between opening the door before I can enable the feature? Any suggestions would be appreciated. Thanks!

@sarahoshaughnessy2537 2 ай бұрын

So I was having trouble with mine too and I’m not sure exactly how I got it to work but I had it open, entered my code and then did the 1&9. I believe that’s what got it working

@howididthis Ай бұрын

Thanks for watching, commenting, and helping others.

@MonAmiToi 5 ай бұрын

Mine it opens with the enter key 🙄

@howididthis 5 ай бұрын

Thanks for watching and commenting

@HIVM 5 ай бұрын

Dopeness thanks

@howididthis 5 ай бұрын

No problem

@howididthis 6 ай бұрын

Did this work for you? Yes? ✅ Give me a shoutout in the comments. No? ❎ Leave a comment with your issue and we’ll work it out together.

@howididthis 6 ай бұрын

Did this work for you? Yes? ✅ Give me a shoutout in the comments. No? ❎ Leave a comment with your issue and we’ll work it out together.

@danstephensen9032 6 ай бұрын

And what if it Doesn’t Close?

@howididthis 6 ай бұрын

It may need to be enabled. Here is a quick video on how I did that - kzbin.infoihYLSplZAJg

@3EmL3 6 ай бұрын

Do all guys just not like to lock the back wheels before they fold it lol

@howididthis 6 күн бұрын

Thanks for watching & commenting. You may be on to something. Let’s ask the audience. Ladies & Gentlemen: do you lock the back wheels of the stroller before folding it?