My cool and heat won’t kick on when switched to Auto. But it will run if it’s switched to Fan On. What could be the issue? Any help is appreciated

Going through it right now and this has placed me on the right path. Big THANKS

Easy to understand, THANKS!

if the bottle brake leak on the bottom. Can i change the new bottle or change the whole master cylinder.

A meg is supposed to have the power coils, and a choke coil to interrupt the flux path. You're missing the choke coils. Also, you need to be actively switching the flux path on and off via the choke coil. That's how you make the magnetic oscillation to generate power.

On aliexpress you can get no name CR2032s for 20 cents each when ordering 50. And I have seen prices as low as 10 cents for larger quantities. I would be curious what the performance is. Are cells that are 10 times cheaper also 10 times worse? My guess wouold be -- probable not. But I don't have suitable for testing equipment to find out 😬

Have you heard of a slip fix

Thank you so much. I just bought my first home in July and I don't really have any experience in the home improvement portion so I'm slowly figuring it out. This is the exact same scenario we're in at the moment. Hoping to get it fixed soon!

Imma try it, Xbox one controller for my daughter. You were very informative and easy to understand. I will let you know if it work !! Thank you sir !!

I have 2 contactors and both receive 240 but no power on the other side and no heat but blower on. Help ! Contactors need to have 240 volts or 24 on the other side ?

I pull with all my might and can’t get the dang thing to come loose.

I need that material yesterday

.

I need that material for a magneto helmet.

Just took the rear tint off of a 20 year old car. The bottom 3 inches was a. nightmare. Wish I would have seen this first.

One of my connections on the on off switch was loose, squeezed it with pliers and now it works. That's worth a like and subscribe. Thankyou! 🎉

KitchenAid Dishwasher turns off mid wash cycle. Impeller tested OK and draining is OK. Any suggestions?

very informative I'm Canadian and I am wondering why Tim Hortons tea tastes so much better than filtered tea at home. i've always liked Smart water so may try that for my tea see if imptoves taste. Also may buy a new hot water kettle.

I don't see isolation valves only a shut off valve? are they necessary?

I wonder if these could be used to store tool batteries inside of them? The firesafe bags fail and the professional containers can cost $800.

Great job. Thanks. I use CR-2032's for my guitar tuners. This is good to know.

finnaly someone can answer my question in my whole life

Brazing in Australia is done with brass rods and acetylene torch what you are doing is silver soldering good job though.

Can four 12v 200ah battery a 3000w inverter run a small standing fridge and how do I know it is fully charge with 2 550 panel?

Convert that gas motor to run on methane gas. Then you got free energy

Standard paint thinner (on a solid-color item) + a small amount of elbow grease works great.

I bought one of these from Vevor and it is locked up on arrival. Yes I put Amsoil in it and followed all instructions. It seems that the compressor is locked up no pressure. I tried contacting them through customer after sales service and I can't send the form without adding and attachment. Can't send jpeg so I don't know what to do there. I then went to their chat and told someone what was going on and they said they would send me an email. 2 days and no email. I get plenty of emails from them wanting to sell me stuff! This is the first thing I bought from them that has had a problem and will probably be the last thing I buy since the contacting them is such a problem.

I have the agitator out, but I can’t separate the base into two parts. Is it stuck dry or is there a tool necessary to loosen it?

Nice work. Just wondering. What type of termite treatment are you using ? My home has a same problem. Termites eating the upper structure.

Is it still working for you?

I brought 50 amp units x 3, 2 happily work at the 40 amps I pull through them, the 3 rd trips at a constant 25 amps, takes 5 mins. So I brought from Jaycar electronics ( Australian electronics retailer ) two 100 amp units, at twice the price of the eBay unit, but exactly the same, at 75 amps constant both trip by the 5 min mark, I had to set my solar controller to limit out put to 50 amps , for these 100 amp units to work. Recently, I replaced these 100 amp units with 150 amp units, one trips at a constant 70 amps at the 5 min mark, the other trips at about 10 mins. When totally cooled and I am pushing 90 amps but blow by 5 mins , thats 150 amp units . Then I decided ( slow learner I guess ) to do some research, now I see these are just another Chinese scam, they just relabel the 50 amp units with what ever they like . Now I am just going to replace them with higher quality fixed fuses. In this video you can see just the small area of the contact patch, that pad is not making contact over its whole area , this would cause it to over heat, heat is made by resistance to flow, that’s the small contact patch to the plate on less that a 1/8 of its surface area

Now what an I going to do for a beer bong! Lol. Great idea.

The best trouble shooting video for microwave oven, by far

Would love to try this. However my surfaces are vertical, so I can’t see it working.

your laptop will run slowly. about 1ghz.

Only problem I see is the nuts and washers could make it easier to lever the lock open with a wrench or similar tool. Look up the two wrenches for opening padlocks method if you don't know what I mean. With the added features in this video you could probably lever it with only one wrench!

I just purchase a 110v inverter can i use it to power my tv, game consoles 120v without damage please help thanks it's a 12v puresine 2000w 110v.

Does anybody remember the anal retentive fisherman with Phil Hartman 🤣🤣

Couple years ago people would have just cleaned their headphones up, nowadays you got to make content out of a damn drink spilled on your headphones😂😂 not even the electronics😂😂 and still I watch the whole video😂😂😂

Always great to learn something new. Thanks for sharing!

Brand of cement?

First, this video is awesome! Thank you! In addition to this setup, I have another setup that requires a mic that has that mono 3.5 jack, which needs to plug into the 3.5/aux female on my laptop. I plugged the mic into the laptop, but I cannot get the laptop to recognize the mic (yes, I went to the "sound" settings and tried changing the default to "Internal AUX Jack" from "Microphone"). This is driving me crazy. Thanks!!! edit: Your other videos are awesome too! Subbed! I can't believe I never stumbled upon your channel before.

I don't have a middle agitator

Anyone else notice how this guy's voice cadence/accent sounds just like the guy from @MountainsMulletsMerica channel?

what about something smaller like a 2x3

Thanks 🙏

Maybe a couple of formula based on the width of the board would have been useful rather than “let’s say 3” and “about that far in”

Are anyone believe that in 2025??

sorry not scientific at all

I might try this in certain situations but I normally just spend 5-7 bucks on a Union fitting. Probably faster with a union fitting too.