Jimbo95

Пікірлер

@Bubbasawyer1974 13 күн бұрын

Love your channel man still cool all these years

@Bubbasawyer1974 13 күн бұрын

Recommend some guys to your channel they are starting out like we were 11 years ago they like your channel

@Bubbasawyer1974 13 күн бұрын

Nice

@giuseppelatina2640 23 күн бұрын

Good to see you back,good video ☺️one of your subscribers here in Melbourne Australia 🇦🇺

@scottfoster2487 23 күн бұрын

Decomps kill saws! Interesting saw design. That K095 bar is a small mount Husky ,quite common luckly.

@casttolast 24 күн бұрын

As we all know it's vital to only gently seat jet screws during adjustment and not accidentally bend them. When you screw your drywall screw into the limiter cap to get purchase surely you are also screwing the jet with it. Would that not risk screwing it against the seat with too much force?

@jimmyboy95 23 күн бұрын

@casttolast Thankfully this doesn't happen as this was a concern of mine also. If it does, it'll turn it very little, as the screws in my experience seem to turn better with the splined insides of the caps then with a flat head. Especially with the saw running :)

@Brian-mc4pd 24 күн бұрын

When you put the orange limiter caps back in, do you have to lineup the slot in the limiter cap with the slot in the actual screw? Thanks.

@jimmyboy95 24 күн бұрын

@Brian-mc4pd If you've light sanded off the plastic nubs, you shouldn't have to. It's mainly just a plastic cap, that's held on by the splined outer shape of the adjustment screw :)

@Brian-mc4pd 24 күн бұрын

OK, thanks for getting back to me so quick

@jimmyboy95 23 күн бұрын

@Brian-mc4pd Not a problem. Glad I could help :)

@gunterbecker8528 26 күн бұрын

How's it going in the meantime? Im very confused what to buy even thinking about a 462 Stihl now,but this is a big saw just for chopping up 2 single axle trailer loads at a time ! What's your opinion on that matter??? Here in Australia they ask the same money for a 400 and 462 !

@stevenbrown5210 Ай бұрын

That was intense 😮

@stevenbrown5210 Ай бұрын

You GOTSUM

@NonieK2267 2 ай бұрын

Worked perfectly. I am 77 and it was almost easy peasu lol I just had to apply a little more umph than is normal for me. But with your clear directions I did it.Thsnk you!

@johnbuchheister9142 2 ай бұрын

Mine ran once, never started again. Crap.

@Kenneth-js4cm 3 ай бұрын

Thanks For Showing, Never Thought About Removing Them Before But Will Remember Ur Vidio If Nessary..

@jasonlazott8337 3 ай бұрын

sure is a nice looking saw Jimbo!

@giuseppelatina2640 3 ай бұрын

Good to see you back 👍

@The_Alabama_Slasher 3 ай бұрын

Greetings Jimbo. I was formally known as sam hashbrown back in the day of the chainsaw community you may remember. Glad to see your back at it again with chainsaw content

@gavinelliot3564 3 ай бұрын

Got a 572+592xp. Choice

@stevenbrown5210 3 ай бұрын

I've heard the new ones are carbon fiber ❤

@nathanrobinson9478 4 ай бұрын

Ive had my 4218 just shy of two years and it gets run hard multiple hours at a time going through roughly 3 to 5 tanks of gas non stop each time it gets used weekly cutting red elm, oak, walnut etc etc yet hasnt missed a beat. Kept it sharpened every use and does aight for a small motor. Could use more torque but cant complain price wise. Its cheap and it works. Not gonna win any races.

@snort455 4 ай бұрын

Thank you. The high speed screw needs another 1/8 turn to run right. It worked perfectly.

@ilietotoi1160 4 ай бұрын

Am și eu. Este foarte bună, o recomand!

@derrickcalloway3055 5 ай бұрын

I would consider for people to like this video

@truthtalker7774 5 ай бұрын

Hopes you see this. I have a Poulan pro pp4218a. I took my bar and chain off. There are holes where yours appeared to be. But they don't look threaded. Do the screws make a thread when installed? I can't seem to confirm if my model accepts them. Thanks

@aaronwendt-smith5910 6 ай бұрын

I gutted the muffler on mine the other day and used it for the first time today. My word it is insanely good now

@oldowl4290 6 ай бұрын

I just bought a NEOTEC NCS6200 62cc / 20" bar. I'll be posting a video of it in action this week. You video among 3 or 4 others helped me settle on the brand. Seems the Neo's are getting really good reviews. And I couldn't beat the price. I got it off their eBay store, used an automatic coupon. It was to my door in 3 days.. CA to Abq NM for $118.34. I couldn't believe it.

@69pantz 2 ай бұрын

I bought the 6200 also I just did I minor muffler mod on mine and measured it's bore with a caliper through the exhaust port.throughtvmy calc it's a 45.8mm bore so probably a 55ish cc. No complaints about power. It's very comparable to my 61cc Stihl. I love how easy it starts.

@ericfuller6326 6 ай бұрын

Mine didn’t come with the elsstostart but came with the 3/4 wrap.

@boodyspringer4199 6 ай бұрын

you find some replacement air filters that fit? link? Thank you

@sakunsukoraharjo7558 3 ай бұрын

5 Juli 2012

@MrBooMY3 6 ай бұрын

Can't wait for my 2 Neotec NS872s to show up. Looks to cut nearly as well as the F660V.

@MrBooMY3 6 ай бұрын

I have 2 "62cc" Zenoah clones. Both are 54.5 cc not 62. Check the cylinder and see if it has 52 or 58 written on the bottom edge next to the base gasket. If it does there is your answer. The 62s do exist just VERY hard to get a real one.

@sakunsukoraharjo7558 3 ай бұрын

#iklansctv2008

@MrBooMY3 6 ай бұрын

I've got 2 Customer return neotec NS872s coming. Hopefully they will both easy fixes but not worried. So far i haven't found a saw I couldn't fix. The worst one was a Poulan PP4620AVX with a piston ring GOD welded in the ring groove. I mixed gas, acetone, and alcohol with a bit of 2 stroke oil and soaked it for days and beat on it with a rubber mallet. Nothing helped. I ended up getting a new piston and rings and now she runs sweet.

@normal450 7 ай бұрын

Junk

@MrBooMY3 7 ай бұрын

I hate KZbin at times. Just wrote a huge comment and it deleted it.

@sendyplumber 7 ай бұрын

Good video on a solution to dust getting past the filter. Custom filtration! How could you write your name on the top cover of such a nice saw! 🤦‍♂️

@bb1040 7 ай бұрын

I just received my FARMMWC F380 today, first thing that I found is it is very hard to pull the rope, very high compression, will be putting on that other handle, LOL Also the gas cap leaks, still trying to figure out what to do about that. Runs great, but I did order it with the bar and chain, but they did not come with this package, and no indication that they have been shipped, will try to contact the seller and find out what is going on.

@mikeyellen362 7 ай бұрын

The troy bilt 46cc 20inch bar is on clearance sale for 169.99 -2/7/24.

@Amarillobymorning777 4 ай бұрын

Where??

@prpr9873 7 ай бұрын

chains really loose

@kenturner3268 8 ай бұрын

UPDATE: Received saw on 02/01/24. Saw had new carb without limiters and is fully adjustable with a double D high screw and a flat head on the low screw. Saw starts in a few pulls and runs like it should. Installed a 038-174-200 non cat muffler and it really rips. Gets on the limiter at 13K in the cut if not under a lot of pressure. Real pleased with the results. Strange thing is that the original carb had no limiters and a build date of 2021. Customer service from the Makita factory in Flowery Branch Ga. was top notch. UPDATE: Talked to the manager of the service center on 01/23/24. He told me that he took the saw outside and it instantly flooded with just a few pulls. He ordered a new carb while we were on the phone. I will update. ORIGINAL POST: I bought one of these new in box 06/12/23 and it flooded after cutting one log. Just one cut. Every time I tried to start it after that gas was coming out of the compression release after the second pull. I just put it away and used another saw. I finally had time to drop it off at the Makita factory service center in Flowery Branch Ga. on 01/17/24. Let's see what they come up with. I bought three of their pro level saws last year since they are killing one of the top brand saws on the market. I will update.

@MrBooMY3 8 ай бұрын

It is 54.5cc. The piston is 45mm, the bore is 45.2mm. There is a 62cc but about 90% of the time they just lie and put a 58cc(54.5cc) jug on it. I got one of the very generic ones that says Chainsaw 5800 on the cover and Professional on the bar. I also find it interesting that the ads usually say semi chisel chains come with it, but they are obviously full chisel. The chain SUCKS if you blunt too many of the chisels. I finally got my old saw running. A Xbull 62cc (54.5cc). The old one has a primer bulb. The newer ones delete it like yours both are. The old carb has 3 lines, new one has 2. You can fit a carb from a 372XP on it with a few modifications mainly to the carb, but to take advantage of it you MUST upgrade the crap stock intake. That's the same on both saws. There is a guy on ebay that sells them.

@garengtutorial8923 8 ай бұрын

Mantap

@sakunsukoraharjo7558 3 ай бұрын

TVRI

@garengtutorial8923 8 ай бұрын

Mesin tahun berapa itu bro

@dobbinslarry 8 ай бұрын

Hi , do these have a clutch operated oiler like the newer stihl saws or the crank driven oilers ? Does it only oil when the chain is turning ? Thanks

@AlmondCreekWoodshop 8 ай бұрын

Very happy with mine. I ordered mine with the 16” bar. The air filter is the only complaint. Watch underneath i noted the gasket wasnt working and allowing sawdust thru. I sealed it with gasket seal.