darin bambrick

Пікірлер

@heathercurrie6454 20 күн бұрын

Great video. Thank you for such a clear explanation.

@Hellowakeup 3 ай бұрын

That intro was so sexy!

@darinbambrick3543 4 ай бұрын

It works very well. If you have a lot of sanding use vinyl gloves. This method keeps the dust down and sand faster

@ssh348 4 ай бұрын

TY for the vid. I need to sand my doors trims and repaint. The job made by builders was terrible. There are blotches of paint and particles, that look quite hard to sand by hand. I am going to try with a small electrical sander or else i will just go crazy and ruin my fingers. Not sure if it's a good idea but my moldings look much worse than the ones in this video.

@SJtoobsox 5 ай бұрын

Had no idea about wet sanding. Makes total sense on semi gloss surfaces

@benkromminga5739 6 ай бұрын

Bob Ross?! Is that you?

@hibaali3797 6 ай бұрын

THANK YOU FOR YOUR GREAT ADVICE AND TIPS. FROM THE UK.

@anaesterhazy631 7 ай бұрын

What if the old layers of different paints peel off and expose the wood??

@projectzorgo1085 8 ай бұрын

You are very talented very good

@TheGreenEarthKitty 9 ай бұрын

@darinbambrick3543 The difference between a craftsman and someone who just gets paid for doing a job, is the attention to detail with the desire and patience to implement it into his work. Also, teaching proper technique makes for a better how-to video, and a new subscriber!❤️ Thanks for the videos!

@deepthind5579 10 ай бұрын

When we sand ; Shouldn’t old paint come off ?

@darinbambrick3543 10 ай бұрын

You’re only scuffing the surface. You just want to take the sheen down or smooth out anything in the paint surface

@mollyturgess3153 Жыл бұрын

Tucking under...good tip.

@traderjoe477 Жыл бұрын

sad that this channel didn't continued. Really good content from a great teacher

@kathryn8685 Жыл бұрын

Great explanation! Thank you!

@darinbambrick3543 Жыл бұрын

Thank you!! Have a great weekend!!

@user-kj5ig8ie8y Жыл бұрын

Aslam and painter India

@TimeAndDateAndName Жыл бұрын

755subs? cmon guys throw him some support!

@darinbambrick3543 Жыл бұрын

Thanks!

@carmenvillanueva5336 Жыл бұрын

Hi! Many thanks for this video! Which paper numer do you recomend for a wood door painted before with oil paint?

@darinbambrick3543 Жыл бұрын

Does not matter if oil or latex. It depends upon the condition of the paint. If the surface is really bad because of heavy brush marks or because there are many coats of paint over bad conditions. Then wet sand with 150 grit. If it’s in really good condition then use 220 grit. If it’s in perfect condition, you still have to sand the surface to “open up” The surface so that your new paint can “grab” The surface and hold on to it permanently. If the surface is near perfect then sand with 320 or 400 grit. Always wipe clean the sanding residue that is left over from wet sanding. Hope that helps

@carmenvillanueva5336 Жыл бұрын

@@darinbambrick3543 thank you so much! Happy Easter!

@greenghoul157 Жыл бұрын

My painter did an absolutely terrible job of my skirting, it is a small area where the mess is though help

@darinbambrick3543 Жыл бұрын

Help with what? I don’t know what you need

@greenghoul157 Жыл бұрын

@darinbambrick3543 Just some advice please 🙏

@darinbambrick3543 Жыл бұрын

Well, it’s difficult to know what he has actually done. Hopefully he sanded. If he has not sanded the paint might come off when you sand it. However, you now know the best way to sand it. Please watch my other videos that should help.

@tdodo3026 Жыл бұрын

Thank you for the video. I have really old baseboard and some part of the baseboard, the paint fades away. That it exposes the original wood. When I sand it down, do I have to remove all the paint on the part that hasn’t fade away to match the faded area? Thanks

@darinbambrick3543 Жыл бұрын

No you don’t have to sand all of it away. You only need to dull down the sheen on the surface. Make sure that you sand at least 90% of the surface. Does that help?

@tdodo3026 Жыл бұрын

@@darinbambrick3543 yes. That helps a lot. Thank you so much for writing back.

@debbieschroeder6567 Жыл бұрын

Thank you for the detailed information on different patching materials. I used to only know about spackling paste (and newspaper for holes). I could use some tips from you for texturizing after patching techniques. I have “orange peel” walls.

@debbieschroeder6567 Жыл бұрын

Thank you! Wet sanding I have never thought of before for wood trim. I am sanding (and caulking/repairing) old 1965 door trim.

@darinbambrick3543 Жыл бұрын

Thanks Debbie. I hope your projects go much easier and smoother with better results in the future

@shahabsaniei3288 Жыл бұрын

Oh man, just think your advice in the US could save my day in Norway. What an impact you just made. Thank you very much!!!

@darinbambrick3543 Жыл бұрын

It has helped me for many years!! That’s pretty cool… all the way from Norway!! Have a great day!!

@marianlawrie8614 Жыл бұрын

So your using 150 for the door ?

@darinbambrick3543 Жыл бұрын

No. I use #220 grit. I buy from Home Depot because their sand paper has a wax back for the water doesn’t destroy it

@albyrobinsonisthebestatfoo3002 2 жыл бұрын

Good video that.

@infectedjoker80 2 жыл бұрын

Nice videos mate very no bullshit just straight to it

@hectormartinez7993 2 жыл бұрын

Hard to hear

@justinbouy3153 2 жыл бұрын

I didn’t know Liam Neeson settled down

@ThroughStruggle25 2 жыл бұрын

Thanks

@ryanclark7026 2 жыл бұрын

Respirator helps

@abiusa 2 жыл бұрын

why wet sanding vs dry sanding? really interested to know. thank you

@scottkuyawa67 2 жыл бұрын

Wet sanding keeps the dust down.

@1lovericklots 2 жыл бұрын

So clear and to the point, have learnt so much Thank you very much and please make more videos

@harrypalmer4857 2 жыл бұрын

Excellent video.

@gerry.shafer6101 2 жыл бұрын

SO. WHAT. GRIT. DID. YOU. USE. ON. THE. TRIM. ? THANKS. AND. NICE. VIDEO. !!

@turmat01 2 жыл бұрын

This guy looks like he could rescues his daughter from kidnappers. (Kinda looks like Liam Neeseon)

@nadarahel5093 2 жыл бұрын

Great teacher where are you

@darin9169 2 жыл бұрын

Michigan. Northern suburbs of Detroit

@PGSL-r5n 2 жыл бұрын

Brilliant video, I will resand some of my doorframes as noit done properly, the wet cloth was a really useful hint

@86medic1 2 жыл бұрын

I have 11 doors and door frames and 7 window Sills to do because the painters i hired didnt do this. They painted over oil based pain and now its just peeling off. Is there any way to do this with an electric sander or am i doing all this by hand??

@10speed. 2 жыл бұрын

Best sanding video ever

@CB-pt2uo 2 жыл бұрын

This guy is a sanding scientists 🤗❤️

@allisea7768 3 жыл бұрын

Great tips. Thank you. And so pleasant to listen to. Like listening to Dick Clark 🙂 Please make more home how-to videos

@HotgyalB 3 жыл бұрын

Thanks for this video. Exactly what I’m looking for

@boofuls 3 жыл бұрын

Wondering where cleaning with sugar soap fits in to the process if at all 🤔

@carlosgj1308 3 жыл бұрын

I got 10 doors frame and Is taking me forever I hate sanding but at least I’m gonna try the wet sanding to reduce paint all over it the floor👍🏼

@ryanclark7026 2 жыл бұрын

Are you done yet

@Matasky2010 3 жыл бұрын

2 more tips: 1. CLEAN any previously painted/finished surface BEFORE sanding. Otherwise you may be grinding dirt/grime into the old paint. 2. Hand sanding as in video is always good, but sanding sponges/pads are also good for lightly profiled mouldings- they can take the shape of the contours as they sand. Just be careful to not get too aggressive or burn-out can result as mentioned in the video.

@debddit 3 жыл бұрын

Does anyone have suggestions for what to do when burn through occurrs? I needed to wtch this BEFORE starting my project!! Also the paint has been knicked clear off my trim in places so I think that would need similar treatment. Thanks!

@savageredbeard 2 жыл бұрын

This is a little late but there's nothing you can do but smooth out the area around the burn through as to make it even with the surrounding paint, then add a few extra coats to that area. We all do it from time to time and that about all you can do, unless you've cut into the wood too deep, then you'll need to put some wood putty in the area and sand it when it's dry to even it out.

@tonyc7352 2 жыл бұрын

@@debddit If you won't be using primer on the entire surface before painting at least spot-prime those burn through areas.

@micdev42 3 жыл бұрын

Great presentation: very calm and clear. Greetings from the UK!

@charlottelewis9048 3 жыл бұрын

Thanks Darin!

@laurastone6578 3 жыл бұрын

That trim looked like it was fine to begin with!

@wordsbymaribeja1470 3 жыл бұрын

If my trim looks like that once I've finished I'll be very happy.

@jackwardley3626 2 жыл бұрын

he is mainly sanding to take the sheen of the paint to make sure the new coat sticks better but paints like oil undercoat will stick to it well enough without sanding.

@Avital4414 3 жыл бұрын

If you burn through the wood, do you just spot prime that area - or do you need to use wood putty?

@phillpip1 3 жыл бұрын

Great video, thanks!

@merovechthe1st 3 жыл бұрын

Very good tips 👌

Ең жақсы KZbin

Пікірлер