Yes I used back the ecu n harness from the 4th gen
@matthewschota69078 күн бұрын
@@bajanrichmax6517 I just hr swapped a 5th gen max but I kinda wanna build a 4th gen for the lighter chassis
@israelgomez8373Ай бұрын
No video yet on the led emblem?
@deebrown8220Ай бұрын
Someone love Irie mon 🇯🇲 music 😂
@bajanrichmax6517Ай бұрын
😂
@sergeantmufucka8727Ай бұрын
I need that body kit!!
@jynxxgpgtАй бұрын
Is this the same setup on an M45?
@bajanrichmax6517Ай бұрын
Yes it is the same process
@Sroor20232 ай бұрын
Is it that easy?
@bajanrichmax65172 ай бұрын
Yes it is not difficult at all
@Marcotic1872 ай бұрын
Great video! No nonsense and full of facts..Thank you. 2006 FX45 here and wanted to change the bushings on my rack, do they just pop out once you take the bolts off?
@bajanrichmax65172 ай бұрын
Thank you. Yes they will
@punjabimerican2 ай бұрын
Love that interior
@bajanrichmax65172 ай бұрын
Appreciate
@punjabimerican2 ай бұрын
@@bajanrichmax6517 I have a 99 se 5 speed . going to do interior next
@clarence8802 ай бұрын
What socket did you use
@stjohnandrews51983 ай бұрын
Looks good
@alexnava76643 ай бұрын
Love that maxx super clean red pops perfect
@Randy-de3zd3 ай бұрын
Hey my boy richtec makes supercharger for that
@bajanrichmax65173 ай бұрын
O really I am interested
@bajanrichmax65173 ай бұрын
Schmellyfart makes the cam adapter u will need to make it work. Look him up on KZbin.
@adityadharni50273 ай бұрын
How did you get a gen 3 vq35 to work on 3.0 timing
3 ай бұрын
6/17/24: thnk u much for putting this precise video and info out yeow. I had a P0302 code read, and change my #2 coil and plug myself. My fx35 2009 has the same looking engine, all is almost good now, the engine stops putting. But, now the car hesitate, a little bit, between changing gears when taking off. It has a very little hitch, if you give it gas a little when move off, like it did not get the gas good. There is no hitching at all when changing down to come to a stop. Only when moving off. And if I should rev the engine in park, it hit a blank spot, but still rev nicely, the car has 200thou, What do you think would be the cause here. I only change the one #2 coil and plug, do you think that I should change the others? Or could this be a tranny issue? I am not a mechanic, just a little handy. Thanks again. I hope you or any one else out there could reply with any info.
@olavoparno4 ай бұрын
Hey man, can you tell us how you did the retractable mirrors?
@bajanrichmax65174 ай бұрын
I bought the light from Japan for the cefiro and wired them to work. I think I did a video om my channel
@olavoparno4 ай бұрын
Wicked sick, man, really awesome!!!
@bajanrichmax65174 ай бұрын
Appreciate
@TycjanZielinski-ny2jz4 ай бұрын
Custom trunk????
@bajanrichmax65174 ай бұрын
Yessir custom made
@budget_hobbies874 ай бұрын
Sounds good.
@budget_hobbies874 ай бұрын
What wheels are those?
@bajanrichmax65174 ай бұрын
370z 19' rims
@Famil-c8i4 ай бұрын
What ecu are u running?
@bajanrichmax65174 ай бұрын
My stock 3.0 ecu
@edsstitype255 ай бұрын
I am working on the same swap for my 97 Maxima. Cant figure out the timing, i have the cam adapters, but need guidance on installing, and trying to verify cam lob orientation and how all that comes together. Do you have any pictures of yours? And any advice? Would really appreciate any help Very nice ride, keep the content coming
@bajanrichmax65175 ай бұрын
Thanks appreciate. I do not have a good video of my installation of them but if you reach out to schmellyfart on KZbin he can provide the details
@nathanielbolden50535 ай бұрын
Damn!…shes beautiful!…i love those rims!
@joselulis865 ай бұрын
Yoo you making me miss my 97 5sp 😅 other than that this thing looks fuxking amazing!!!!
@4DIVID75 ай бұрын
What's up with the trunk? The spoiler how did you manage that?
@bajanrichmax65175 ай бұрын
Had the factory trunk fab up to create this spoiler look
@hazexo11315 ай бұрын
Is that a custom trunk / custom kit?
@bajanrichmax65175 ай бұрын
It is a custom trunk had it made 10+ years ago
@hazexo11315 ай бұрын
@@bajanrichmax6517 Damn looks amazing
@hazexo11315 ай бұрын
@@bajanrichmax6517 hard to find such skilled custom bodyworkers nowadays, seems like Florida is where it’s at, all the sickest done whips seem to be in Florida
@turbomaximal59406 ай бұрын
What size front rotors
@Mynes20116 ай бұрын
Ever consider selling it? I’d be interested
@bajanrichmax65176 ай бұрын
I thought about it a few years ago and then as what was I thinking lol. I had this car for 24+ years and she works like a dream. We will never part ways
@jeezy52706 ай бұрын
GREAT WORK BROTHER!!! Love to watch your vids keep em coming
@bajanrichmax65176 ай бұрын
Appreciate
@vkaden2k9886 ай бұрын
Where and how did u find the Infiniti emblem for the m37 I need one?
@bajanrichmax65176 ай бұрын
This is the q50 emblem and I cut the M grille to make it fit
@KevinRamosTino6 ай бұрын
I got a 95 trying to figure out what to swap my engine is done for so time to swap it for something any ideas
@JDMJuniorIG6 ай бұрын
I have a 1995 Nissan maxima can I put 2020 enigine on it
@bajanrichmax65176 ай бұрын
Yes same setup without an issue
@ReemoTheCeo7 ай бұрын
Still got it?
@bajanrichmax65177 ай бұрын
Still have her and running even better after I changed my fuel pressure regulator
@gabrielalba93118 ай бұрын
Is the m35 the same way way to remove?
@bajanrichmax65178 ай бұрын
Yes same process
@gabrielalba93118 ай бұрын
Thanks man you video great
@Naipaul668 ай бұрын
NICE BUILD LOVE THE SE R SEATS
@curbsid38 ай бұрын
where u get front lip from?
@bajanrichmax65178 ай бұрын
This is a stillen lip. Bought many years ago
@jeezy52709 ай бұрын
Cool swap !! Will the 97 direct swap w infinity coupe or 350 Z?
@bajanrichmax65178 ай бұрын
I saw someone tried that swap before.
@jeezy52709 ай бұрын
SWEET!!
@jeezy52709 ай бұрын
Gota 97maxima replaced valve cover gasket but it always starts to leak again
@bajanrichmax65179 ай бұрын
Are u placing silicone in the corners
@jeezy52709 ай бұрын
@@bajanrichmax6517 thanks for the response I’ll ask my guy when he replaces it , great channel!!
@jeezy52709 ай бұрын
Are the 350z wheels 18x7 ?
@bajanrichmax65179 ай бұрын
These are 19 x9 n 19 x 10 370z rims
@Saveauxify9 ай бұрын
Awesome video, thank you very much for taking the time to film, and explain everything you did! Did I hear you correctly, the NEW steering racks inner tie rod ends were loose, but your old ones were tight? I dont understand?
@bajanrichmax65179 ай бұрын
Thanks I am happy it was helpful The outer tie rod ends on the rack I was putting in were no good. It was a used rack so i took my ends off as they were new
@Saveauxify9 ай бұрын
@@bajanrichmax6517 Okay, I didn't catch that it was a used rack, but that completely makes sense, thank you for taking the time to explain. Once I have the rack swapped out, do I simply add fluid to the power steering reservoir? I'm guessing I would need to take the car for a short drive and then recheck levels. Does this sound correct, or is there a special method needed to fill the reservoir/rack? You're an awesome KZbinr to respond to everyone who makes comments. Thanks again!!
@bajanrichmax65179 ай бұрын
Appreciate the comment. turn the steering from side to side and check the level. Then take for a drive and recheck the level
@singingvideos33299 ай бұрын
Man, those hex screws broke my hex screwdriver. Any tips ??
@bajanrichmax65179 ай бұрын
Grip.the screw with a pliers and turn them slowly. They can be very tight
@885.0ELopez6 ай бұрын
@@bajanrichmax6517 dont u have to do a throttle body system re learn ?
@bajanrichmax65176 ай бұрын
Spray them with WD and let it soak
@885.0ELopez6 ай бұрын
@@bajanrichmax6517 dont u have to do a throttle body system re learn ?
@bajanrichmax65176 ай бұрын
No you don't ask along as u do not open up the throttle body flap by hand.
@africasquad106010 ай бұрын
Hi , i am in Ghana, i wish to do this swap to my car , can you please tell me what is needed
@bajanrichmax65178 ай бұрын
I will add the list by monday
@africasquad106010 ай бұрын
Where do you shop for parts ,I can find any shop that sells your tail lights
@bajanrichmax651710 ай бұрын
I made the taillights by putting them in the oven to open them and then adding the clear piece from materials I bought from home depot
@africasquad10608 ай бұрын
Hello thank you for the response, but something is bothering me , Why don't people just use the 3.5 timing?
@bajanrichmax65178 ай бұрын
I did my taillights in my oven and put a piece of glass from home depot. A few years now
@optimisthoops10 ай бұрын
torque specs??
@bajanrichmax651710 ай бұрын
14 foot pounds
@turbomaximal594010 ай бұрын
What’s your ig please?
@yodauaaaaaa10 ай бұрын
Wish you could help me with this damn timing chain 😭
@JoseLopez-ft1bx10 ай бұрын
What grille is on your maxima?
@bajanrichmax651710 ай бұрын
Factory grille just widen the space to fit the emblem
@bajanrichmax65173 ай бұрын
97-99 maxima grille
@phillippace758011 ай бұрын
What’s the best aftermarket parts for all infinity parts???
@bajanrichmax651711 ай бұрын
I usually get parts from O'Reilly I found they are the best for my infiniti
@MegaMastermas11 ай бұрын
Hi. Do you have a link to where i coild buy tje original spark plugs?
@bajanrichmax651711 ай бұрын
I just walked into the dealer parts dept. O'reilly's have the same plugs also for $1 or than the dealer