The video must've started after the past where you plugged it in. Not sure why. When I watched it started after the dash cover was back on.
@gregcoffey7240Ай бұрын
I'm confused. This video shows zero of the actual wiring. I can mount stuff to the dash but how did you connect the wire harness you connected to it?
@oscarsalazar7658Ай бұрын
It was a quick video. I could have torn into the dash more. But this video shows that isn’t necessary. You remove the panel under the steering wheel. I show the location of the factory plug for the brake controller. I show what harness adapter I used for the brake controller I’m using. I don’t show myself plugging the two connectors together but that shouldn’t be necessary.
@chriso2385Ай бұрын
Great video, very useful for me thank you!
@grumpygruntx7 ай бұрын
I just bought a 2001 Excursion yesterday. I have that same controller in my 2003 Toyota Sequoia. Thanks for doing this video makes it a little easier installing another one
@oscarsalazar76587 ай бұрын
No worries. I’m glad it was able to help.
@azjohn52010 ай бұрын
Thanks for the video. Good idea using rivnuts with stainless hardware. Curious to know how your Move bumper fit with your factory hitch and 7-way plug (assuming you have that). I’m doing mine right now (2000 7.3L Exc.) and it looks like I’ll have to cut further relief into the bottom of the bumper, or I could modify the slits for mounting to the frame to bring the bumper up 1/2”.
@oscarsalazar76589 ай бұрын
Sorry for the late reply. I completely relocated the 7 way plug. Still using the factory one but I’m no longer using the original mounting bracket. I cut into the move bumper and installed the plug on the left hand side next to where the license plate mounts. I can send pictures if you want.
@HouseofGlossDetailingLLC Жыл бұрын
Dope!
@kaitopillar Жыл бұрын
The fucking goat
@4mv430 Жыл бұрын
What size is the double din??
@oscarsalazar7658 Жыл бұрын
I used the Sony xav-ax1000. According to the specs online it’s a 6.2” double din.
@werdnawgaf4809 Жыл бұрын
What size is the double din you used?
@oscarsalazar7658 Жыл бұрын
I used the Sony xav-ax1000. According to the specs online it’s a 6.2” double din.
@werdnawgaf4809 Жыл бұрын
@@oscarsalazar7658 thanks! It looks good.
@BrianWalsingham Жыл бұрын
Thanks! My Reece BC failed so I’ve been looking for a better option for my 2000 Excursion.
@darrelllee2107 Жыл бұрын
Thank you! I have a 2001 Excursion and need a brake controller as well so I am glad to see how easy this installation is.
@oscarsalazar7658 Жыл бұрын
Glad it helped
@treemanchris Жыл бұрын
You made it look easy
@oscarsalazar7658 Жыл бұрын
Install wasn’t too bad. The hardest part was getting to the install behind the dash.
@juandartyy Жыл бұрын
Nice
@oscarsalazar7658 Жыл бұрын
Thanks. I like the way it looks but also very useful for keeping my stuff organized.
@1-Six-dee Жыл бұрын
Lmao, I have an excursion never seen your video never got a recommendation for these products and u got this exact same setup the controller and the adapter, how do u like it thus far? And what type of trailer do u tow? Like how many axles and how much does it weigh
@oscarsalazar7658 Жыл бұрын
On the excursion Facebook pages this seems to be the go to setup. Lots of people recommended it. I mainly tow my single axle 21ft travel trailer. But I also tow a double axle tilt trailer from time to time. Haven’t had any issues with it.
@1-Six-dee Жыл бұрын
@@oscarsalazar7658 I got a 20ft car trailer I tow a 8k lb truck to car shows, I got this one setup now, I am about to out a weight distribution hitch on it, how much is the most weight u have towed with yours?
@johnbailey7707 Жыл бұрын
Nicely done. Thanks for filming it. My Excursion has same issue.
@oscarsalazar7658 Жыл бұрын
Glad it helped. I had some free time that day and figured I’d finally tackle that eyesore.
@deerbrookconstructionconcr5172 Жыл бұрын
I just had the same install. Very easy, however I am reading no trailer connected even when I am connected. I tried on two separate trailers. Any ideas?
@oscarsalazar7658 Жыл бұрын
Do both trailers have trailer brakes? It should recognize a trailer with no issues when it’s hooked up.
@deerbrookconstructionconcr5172 Жыл бұрын
@@oscarsalazar7658 I have several trailers. They all have breaks and work with my other trucks. I’m wondering if the plug may have been replaced at some point and not wired correctly. All the lights work as they should.
@oscarsalazar7658 Жыл бұрын
@@deerbrookconstructionconcr5172 Good idea. I’d look into the wiring if I had similar issues. Hopefully it works out for you.
@mikenelson72804 ай бұрын
Nice job
@carlosbayonguerrero12802 жыл бұрын
Hello Oscar!! i would like to contact with you. I have a 5th gen Celica and i love the suppletory lights in the front, im willing to put them in mine. I would like to know if you could put me in contact with the owner of the car, i would love to see more images and more videos about that. Thank you!!
@johncraig4062 жыл бұрын
THANK YOU SO MUCH, you solved my problem, and I have the same Exact controller, 3 of them in fact, they work awesome!
@oscarsalazar76582 жыл бұрын
Glad I could help
@DoubleNickle2 жыл бұрын
Your hands must be the size of a cats paw. I've removed one half of my dash and still can not get to this plug. I'm on the verge of using the blue tip wrench. Any one have a better solution?
@oscarsalazar76582 жыл бұрын
It was a pain in the butt. Once I had the plug loose I reached from underneath and plugged it in. It wasn’t fun but it was possible.
@user-eh5cr4or6k2 жыл бұрын
Thanks for the Video. Did you have to install a fuse or relay? My 01 p'up had a fuse and relay that had to be installed to get controller to work. My 05 excursion came with a pig tail that was in the glove box with factory instructions on install after 17 years of mall crawling no telling what the other half did with that bag with the plug in it. Lol Thanks again.
@oscarsalazar76582 жыл бұрын
No fuse or relay needed for the install. Just needed the harness and the brake controller. Everything was plug n play.
@jazielpalomares97882 жыл бұрын
About to start fixing mine, I'm really nervous about the rust. Motor wise, the 3sgte has a new harness and a air to water intercooler. However I think I'm getting low compression on one of the cylinders. Might just go 5s. I would love to know what other problems you have ran into
@thewoodworkersjourney33142 жыл бұрын
Thanks for the tutorial!
@oscarsalazar76582 жыл бұрын
No worries. I hope it helped.
@itsathaithing3 жыл бұрын
Great video thanks!
@oscarsalazar7658 Жыл бұрын
Glad you liked it!
@Preparednessman3 жыл бұрын
Very grateful for you doing this. Just installed it...the EXACT same! Thanks brother!
@oscarsalazar76582 жыл бұрын
Glad it helped.
@Wildwestwill1855 жыл бұрын
Where in California did you do this
@oscarsalazar76585 жыл бұрын
William Montes Sorry for the late reply. These events are help by Nor Cal Rally Cross. You can find them on Facebook. They hold events in Santa Rosa and Prairie City.