The KeyMaker

Пікірлер

@shawnfago1 11 күн бұрын

Solid

@KeyMaker-22 11 күн бұрын

Thanks bro

@albertovar905 16 күн бұрын

Did you use the oem Key or aftermarket

@imedidriss6991 17 күн бұрын

Hi i lost all my keys Volvo s60 2005 can you help how to proceed and which autel model i have to use

@derekkchung 24 күн бұрын

I was told that Autel KM100 can do CAS3+ all-key-lost. Have you tried that?

@sthedycantonambaekome710 Ай бұрын

Good evening my brother, I really like your work from my country. I have a 2012 BMW X6 E71. I would like to know is this the same procedure to follow to reprogram the remote control lock? The key starts the vehicle but it no longer locks the ports. I changed the kidney battery. Can you direct me please?

@mordysalem1498 Ай бұрын

Hey bud I have the same exact problem! Do you have a link to purchase the bypass emulator?

@Eurosmithpro Ай бұрын

get something like ACDP that reads and makes key by eeprom dump. zero downgrades. best investment i've ever made. no soldering. no more fixing fuck ups from programmers that require a reflash to access key file.

@Rolls....Royce.... 2 ай бұрын

Can you just use a flipper for this?

@rodneybizzell5806 2 ай бұрын

Hello what software are you using and what key programmer I see autel and something else

@aleksa52 3 ай бұрын

ISN code is needed to decrypt CAS date to make a key. It actually takes about 15 min to read ISN code from DME directly on the bech.

@jonathanromero8639 4 ай бұрын

Question bro, if I have a working key can i get the ISN from the key or how would i go about programming a blank key with 1 working key. Also, it would be done on an otofixIM1 programmer which seems very similar to the one in your video. Any suggestions would be greatly appreciated, new at this but have enough knowledge around cars. Haha

@tommyherrera6456 5 ай бұрын

This key also comes with a remote I think not sure.

@KeyMaker-22 5 ай бұрын

Yes there’s a keyed version of it as well you have to get it with the remote code which comes on the oem package haven’t been able to do one other wise .

@FL-ul5mq 6 ай бұрын

it get so hot by the sun that it melts the solder.....good god....what a BS! Insetad it is justmechanical stress on SMD pads that causes them to fall of after a while.

@KeyMaker-22 5 ай бұрын

I would say your right but I seem to get these alot when it’s 100 degrees + out here in California. That’s and its an electrical signal the runs thru the pad not a mechanical movement . Can you please elaborate on what your saying , you might know more than me when it comes to the situation so I’d like to get more information. Thanks

@BiggWhamm352 6 ай бұрын

This is for the w164 I have the w164x I need a lil help trying to fix mine

@KeyMaker-22 6 ай бұрын

Give me a call 3233044593 if it goes strait voice mail text me

@kyenwilliams8086 7 ай бұрын

I wanted to ask you a question on a 2013 V 70 All Keys Lost

@KeyMaker-22 6 ай бұрын

What's up brother how can I help

@tomconner5067 9 ай бұрын

Deadlocked BMW’s will disconnect the lock cylinder from the latch assembly on the drivers door, even if you’re in the car you still can’t open the door. In order to gain entry in this situation, simply air wedge the passenger side door and double pull the inner door handle, the alarm will sound, just pop the hood and attach a battery charger to the jumper 12v + terminal, and 12v negative/ground. And by that time the car will quit carrying on. I might add you should open every door when you first gain entry to minimize the alarm noise duration. Hatch too, use the glow in the dark escape handle

@KeyMaker-22 8 ай бұрын

only time Iv ever had an issue was on 2006-2007 Range Rover with an ews system which was locked and we had a lot of people come to try to unlock it I made a key for the door and everything but nuthin we ended up busting the window .

@Juppie902 Ай бұрын

I did a similar range rover I broke the window but alarm didn't sound until I put a key without a chip in it to the IG switch, the thing is the inner lock mechanism broke so you can't open the car with the key and inner door handles don't work when locked and Remote didn't work.

@seriousproductionz1 9 ай бұрын

Thanks for the great video. How did you determine it's a 4 pin?

@KeyMaker-22 5 ай бұрын

Si as far as keyed Nissans go I know there all 4 pin except for the older ones which are NAT5.

@seriousproductionz1 9 ай бұрын

Thanks for the great video! For someone trying to get into the business, this is amazing.

@KeyMaker-22 8 ай бұрын

Our pleasure!

@convertathletics4564 9 ай бұрын

Terrible. Istap is the firmware encryption and should always be done on bench. Funny how autel labels this process as an upgrade. Doing these OBD with any tool is frikking cowboy. I wonder how many cas units and dme this guy has bricked.

@KeyMaker-22 8 ай бұрын

Actually if the battery voltage is steady and if you have solid internet you won’t have a problem , iv done a few hundred same way never had an issue. In my career I bricked 1 because I connected jumper cables to it to try to keep it at 13v and somehow it failed to downgrade but I also have an autohex which helped fix the flash that I erased . People get told a lot of things by guys that learned from an older generation that looked at European cars as a dangerous/risky thing but I’ assure you like everything in the word people learn easier and better ways of doing things by going out researching and trying . Hope you enjoy the videos .

@Eurosmithpro 8 ай бұрын

Ok sir. Im not getting into a pissing match w you. All I have to say is: Any tech that has actually done 100 bmws will know that this statement is total bs.

@KeyMaker-22 8 ай бұрын

@@Eurosmithpro ok 👍🏽follow our instagram @_the_key_maker you can learn more stuff I have more videos on there and thanks for subscribing

@Juppie902 Ай бұрын

what's an autohex and where to get one ? prepping in case I brick a customer vehicle

@gate8173 9 ай бұрын

Great video bro...might have one coming up soon for myself. I found an upgrade for the Autel clip on Ali from Progsir, 8 leg eeprom clamp. Works much better, just press straight down and screw probes into place. I have done several VW clusters easy since picking it up.

@KeyMaker-22 6 ай бұрын

I'm definitely going to check that out,thanks for the info

@attilaheredi3873 5 ай бұрын

waiting on that video brother!

@farajalhusaini 10 ай бұрын

well done bro. GBOX 2 its work normally or most use GBOX3 ONLY? THANK YOU

@KeyMaker-22 10 ай бұрын

Yea gbox2 works good but my cable was really mangled , I think that’s what it was . I read msv80 dme’s with it before .

@myroad5469 10 ай бұрын

Hello plz So we must not have isn code to do all Key Lost on cas3 + istap ??? Thank you for your Replay 🙏

@KeyMaker-22 10 ай бұрын

Yes you do need it but sometimes when you do the 64 starts it’ll work like in this case , always have your G-box ready in case it doesn’t work

@myroad5469 10 ай бұрын

@@KeyMaker-22 oky thank you very much 🤝

@KeyMaker-22 10 ай бұрын

@@myroad5469 I’ll be posting dme read video tonight check it out

@blackdogchris 10 ай бұрын

Hi is this a repair for the key that turns the steering lock off but wont go any further to the start position .?

@KeyMaker-22 6 ай бұрын

Give me a call 3233044593 if it goes strait to voicemail text me

@PavLockLocksmith 10 ай бұрын

Car needed to be running 15min at the end? I have add key with cas istap first time. I wont to do on bench becouse people says its safer

@KeyMaker-22 10 ай бұрын

I syne the dme 20 times then let it run just to be on the safe side .

@car-key-programming 11 ай бұрын

Not true what you said about mobile hotspot. I've been using my phones hotspot for years and using it at the same time and never had an issue. Not saying i will never have a problem but so far no. But also depends on who your service provider is.

@KeyMaker-22 10 ай бұрын

Be careful with that iv seen many cas3 get damaged , better same then sorry.

@car-key-programming 10 ай бұрын

@KeyMaker-22 If it gets its data damaged, all I have to do is pull it out and renew it, then program back in the car. No big deal. Just sucks for the customer as he has to wait longer.

@KeyMaker-22 10 ай бұрын

@@car-key-programming I’ll be putting up video of full process of DME read check it out

@stanghp1 11 ай бұрын

Great video, do you need active Autel subscription to do this?

@KeyMaker-22 5 ай бұрын

Not to sure I know Mercedes you do . In this case it was a cas4 which is BMW I would imagine it does but not 100% sure

@takalinos 11 ай бұрын

13+ VOLT POWER SUPPLY?

@KeyMaker-22 10 ай бұрын

I used to , but as long as it’s stable at 11-12 volts iv never had an issue

@tomking3942 11 ай бұрын

If you get the car to turn on then back out to read isn will that work? The 64 times seems time consuming. The dme read only requires us to get the car on right?

@KeyMaker-22 10 ай бұрын

Well yes if you have a key and you can get it on it’ll let you read the isn code , but in this case all keys were lost , I usually read the dme for the ISN code but for these 3 series with cas3 istap it’s a bit of work to disassemble the all the plastic to get to the dme so I just try this first . It’s not to time consuming

@kimlove7172 11 ай бұрын

where are you? I need your services

@KeyMaker-22 11 ай бұрын

Hi I have workers in LA , Ventura, and San Diego county . Give us a call 3233044593

@mohamedbashire5869 Жыл бұрын

Thank you very much ❤

@bonetregoning5904 Жыл бұрын

"Promosm" 💦

@robwanhella6860 Жыл бұрын

Do you have the ISN from the DME

@johnholding107 Жыл бұрын

Did you watch the video?

@robwanhella6860 Жыл бұрын

@@johnholding107 yes i did and was also watching when i installed it in the vehicle, but it went in quickly no waiting or anything, but yes it did work well for me Thank You

@KeyMaker-22 11 ай бұрын

In this situation I just did the 64 try’s and it worked , but usually we have to pull the dme .

@isabellasotomayor4916 Жыл бұрын

That’s so cool! Do you teach others how to become locksmiths?

Ең жақсы KZbin

Пікірлер