Пікірлер
@lukeholland7147
@lukeholland7147 2 күн бұрын
You can probably add some RFY shocks would look sick
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Yeh they would have been fine. Sometimes the extra spend is unnecessary though. New owner can put his or her mark on it now
@lukeholland7147
@lukeholland7147 2 күн бұрын
More videos on the Herald please
@barryharkness7425
@barryharkness7425 2 күн бұрын
Do you have a spare injector
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
I'll check Barry. Remind me on Sat Mate. I'm not sure if I do though
@specc_s1452
@specc_s1452 3 күн бұрын
Hello charlie, i just go a sinnis hoodlum 125 which is pretty much identical to this bike internally. Could you please let me know where the choke is located, thankyou.
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Hi is it a carb or a fuel injected bike. If its fuel injected then it won't have one.
@specc_s1452
@specc_s1452 2 күн бұрын
@@motorcyclerescuer ah okay, thankyou very much. It does indeed have electrical fuel injection 😃👍
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Yes so no choke. The ecu will richen the mixture on cold starts.
@barryharkness7425
@barryharkness7425 3 күн бұрын
Could you tell me what the valve clearance is on piaggio fly 125ie 3v 2015
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Hi, i believe it's 0.08mm on all. Done when cold. Thanks
@Turleyswheels
@Turleyswheels 3 күн бұрын
great job ❤
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Cheers Neil
@DB71170
@DB71170 4 күн бұрын
Thanks for the shout out & I'm sure it will sell as is...as for what's left to add/change...have to agree with black grips and some mirrors or at least one. And the missing foot peg 😂. Hanway is carb conversion by the looks of it...I'm surprised you haven't been doing compression tests lmao. Stay safe n warm & thanks for the update 👍
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Ha ha I should do them more. But i enjoy the feeling of getting a bike started without a test lol. Cheers Daniel
@cosmicdrive8601
@cosmicdrive8601 4 күн бұрын
Foot peg missing 🤣
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Lol I hardly noticed 😅
@spinaway
@spinaway 4 күн бұрын
I have a mint condition 2015 Honda NC 750 sae Manual,26000 miles, full service history, with front and rear Dashcam, i decided to hang up my helmet due to age and bad eyesight, so i contacted we buy any bike, they offered me £1000, i told them where to go.
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
That's shocking. They are terrible. Better of selling to someone privately knowing they will get a good bike
@projectclark123
@projectclark123 4 күн бұрын
Really good video keep 😊it up I spent 3 hours trying to put my exhaust on today
@motorcyclerescuer
@motorcyclerescuer 2 күн бұрын
Oh wow that was long mate. I hope it's going well.
@williamfitzpatrick7248
@williamfitzpatrick7248 4 күн бұрын
Hi Charlie the herald looks great , you’ve done it again, top man 👌
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
One more change coming to it. Keep your eyes peeled. Cheers William
@williamfitzpatrick7248
@williamfitzpatrick7248 4 күн бұрын
Looking forward to it Charlie
@andywrollo2915
@andywrollo2915 4 күн бұрын
Really love that bike. The shape etc. Dont like the exhaust. Great videos. I got a triumph 650 2014. Get rid in spring.
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Nice triumphs them. Yeh ideally I wanted an original exhaust but couldn't find a decent one. This was the closest thing I could get to original. It worked OK. Cheers Andy
@Hazmatti
@Hazmatti 4 күн бұрын
put some wax on them wheels ;)
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Lol, I'm too lazy
@tescan1961
@tescan1961 4 күн бұрын
Hi Charlie. Nice Herald and good to know it sold quickly👍 When are you going to tackle the clutch plates on the Hanway 🤔 be good to see the outcome 😀
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Very soon. Next vid or 2 I'm sure. It's not going well. The clutch is sorted but I can't get it to idle well and it has weird intermittent revving issues. Posts online point to it needing a new ecu which can't really be found. So it's a pain. I may try a carb conversion to see if it's better. Cheers mate
@stephenwalsh8184
@stephenwalsh8184 4 күн бұрын
🏍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Cheers Stephen
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
I would like to thank the channel members...... Davie small Will boypr Steve spark Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Stuart John's Daniel Barnes
@andrewcrofts531
@andrewcrofts531 4 күн бұрын
Gloss front mud guard.....chrome mirrors....just a thought😀
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Not a bad idea Andrew.
@gregbreeze-hatchett6115
@gregbreeze-hatchett6115 4 күн бұрын
Yeah nice looking bike, maybe lower handlebars black grips & bar end mirrors 👍
@motorcyclerescuer
@motorcyclerescuer 4 күн бұрын
Good shout here Greg. Next vid or 2 will show the final outcome mate. I got and tried renthals but they didn't feel comfortable in the end. So stuck with original bars.
@grahammitchell6435
@grahammitchell6435 7 күн бұрын
Sounds great now.But are you sure thats the fuel relay,on my 2000 NT650V that's the indicator relay .
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
It's a old vid so I'm unsure if I'm being honest. Your probably right. I make many mistakes in my vids. Thanks for watching. Charlie
@godwinpaul368
@godwinpaul368 7 күн бұрын
Great video mate, cheers!
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
Cheers Paul
@MrMONTY711
@MrMONTY711 7 күн бұрын
what a prick
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
You are probably right, but why?
@stephenwalsh8184
@stephenwalsh8184 7 күн бұрын
🏍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
Cheers Stephen
@tescan1961
@tescan1961 7 күн бұрын
Does it spark, ouch, yes it sparks 🤣 Still love that Herald as well Charlie 👍 be a lovely bike for someone, oh and don't forget to put the foot peg back on 😉😀
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
Sold this morning funny enough. With a new honda cg black tank 😅😂🤣
@spinaway
@spinaway 7 күн бұрын
That was a shocking episode Charlie lol.
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
Ha ha my poor heart
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
I would like to thank the channel members...... Davie small Will boypr Steve spark Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Stuart John's Daniel Barnes
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
I would like to thank the channel members...... Davie small Will boypr Steve spark Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Stuart John's Daniel Barnes
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
I would like to thank the channel members...... Davie small Will boypr Steve spark Hairy Bastid Mattys on the move Glowskulls 100 John Weller Tom Milner Tony Taylor Jake Forbes Pickwizard Stevie Terence Jarrett Aydin Eshref Stuart John's Daniel Barnes
@DB71170
@DB71170 7 күн бұрын
Charlie, can I make a suggestion....think you need a whiteboard to keep track of what you've done or what needs doing per bike. You could also then hang the keys to each bike on its board . Stock should start moving soon, as the season re-starts . Stay safe and ride steady 🤘
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
That's a good idea Daniel I'll look into it. The herald sold this morning and the mitigan is advertised. The hanway is terrible. Might need a new throttle body system or conversion to carb. I've ordered a manifold that may or may not work.
@DB71170
@DB71170 5 күн бұрын
Oooh thats good news ( kitty rising) , think carb conversion for hanway, not to sure about manifold lasting long. Have fun !
@Eana-of-Sussex
@Eana-of-Sussex 8 күн бұрын
If the clutch issue isn't a stretched cable you could take the clutch plates out and prize them apart, sand the friction plates with them face down on some sand paper on a table, and then reinstall them after soaking in transmissionfluid.. this will free the clutch pack and you might find thats enough to have a working clutch again with no cost involved. The clutch plate thickness can be checked at this stage and some new clutch plates ordered if below the minimum stated in the manual or online... Best of luck Charlie. Its definitely in your skill set to disassemble and rebuild a clutch if you were that way inclined.
@motorcyclerescuer
@motorcyclerescuer 7 күн бұрын
Cheers, this is close to what I did although I didn't have the special tool to get the plates out so I cleaned them while in the basket. Worked a treat though. Rest of the bike is terrible
@JUSTINIAN48
@JUSTINIAN48 9 күн бұрын
250cc EFI Xpro fuel injection issues. Starts but won't stay idle. When i ride it'll stall out at Red lights and stop signs. I replaced the fuel filter but i haven't changed or checked my fuel injector. I let the bike sit too long. Only has 2888 miles on it. Can you, would you help me please.
@motorcyclerescuer
@motorcyclerescuer 9 күн бұрын
Hi, I've got the same issue now with a hanway 125cc. The first thing you need to do is try to remove as much of the old fuel as possible and replace with good fuel. Have you checked your valves yet? They need to be in spec to idle well.
@Anthony-k1u3d
@Anthony-k1u3d 9 күн бұрын
Hey Charlie, yes get it warm let the oil circulate around the clutch plates periodically pull in the clutch ,run it in gear on the stand, eventually the plates should free up,
@motorcyclerescuer
@motorcyclerescuer 9 күн бұрын
Cheers Anthony
@Eana-of-Sussex
@Eana-of-Sussex 9 күн бұрын
well done charlie. nice lil bike.
@motorcyclerescuer
@motorcyclerescuer 9 күн бұрын
The Hanway is still in a bit of a state. But I'm getting there. Thanks
@juntjoonunya9216
@juntjoonunya9216 10 күн бұрын
Why all the clacking though?
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
It's a old vid that, but the camera picks up sounds in a weird way sometimes. It could be a normal sound but sounds weird on camera. The clutches wear on these and make a sound aswell so could also be that. Thanks
@williamfitzpatrick7248
@williamfitzpatrick7248 10 күн бұрын
You are the bike whisperer Charlie, great video as always mate
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
It's not going well so far mate lol. But hopefully I'm making progress. Cheers mate
@richyboy1116
@richyboy1116 10 күн бұрын
I've had this issue before with the clutch. Pulling the clutch in and rocking the bike backwards and forwards whilst in gear it finally became disengaged
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
Yeh i tried all of that and nothing worked. In the end I actually had to clean the plates. Did work though. Cheers
@stephenwalsh8184
@stephenwalsh8184 10 күн бұрын
🏍👍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
Cheers Stephen
@ChayBode
@ChayBode 10 күн бұрын
I like how you admit to not knowing how to change a clutch, I don't know but will be watching to find out as I just got a Lexmoto ranger type and will be pulling it apart to learn how to fix it up, starting with a lawn mower engine :)
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
That sounds great fun. And yeh always best to be honest about stuff. Especially as so many watch lol. Cheers mate
@benlynch3783
@benlynch3783 10 күн бұрын
The clutch plates are stuck together
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
Yes they are. I've never had to take a clutch apart to un stick plates but on this occasion I did. Cheers
@andywrollo2915
@andywrollo2915 10 күн бұрын
MUDGUARD IS WRONG WAY ROUND. BACK TO FRONT.
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
On the Hanway? I didn't even notice
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
I just checked, that's a scrambler mudguard. How its ment to be?
@DB71170
@DB71170 10 күн бұрын
Happy New Year Charlie!! You sound full of festive frolic , which is great to see . That Hanway will haunt you & if you can do valves, a clutch is a walk in the park( even i can do clutches lol ). Look forward to seeing the next one 🤘
@motorcyclerescuer
@motorcyclerescuer 10 күн бұрын
Cheers Daniel, happy new year mate. I just gave the plates a spray in the end and it was good to go. Well that part was. Happy new year
@MarchMadeFrog
@MarchMadeFrog 11 күн бұрын
my dream bike bro
@motorcyclerescuer
@motorcyclerescuer 11 күн бұрын
Great bikes. Some disagree. I love my 390.
@stephenwalsh8184
@stephenwalsh8184 12 күн бұрын
🏍👍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 12 күн бұрын
Appreciate it mate
@stephenwalsh8184
@stephenwalsh8184 12 күн бұрын
🏍👍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 12 күн бұрын
Thanks Stephen
@stephenwalsh8184
@stephenwalsh8184 12 күн бұрын
🏍👍👍👍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 12 күн бұрын
Cheers buddy
@stephenwalsh8184
@stephenwalsh8184 12 күн бұрын
🏍👍👍👍👍
@motorcyclerescuer
@motorcyclerescuer 12 күн бұрын
Cheers Stephen
@williamfitzpatrick7248
@williamfitzpatrick7248 13 күн бұрын
Great video Charlie, bike looks and sounds amazing, top banana
@motorcyclerescuer
@motorcyclerescuer 13 күн бұрын
Cheers William
@christophershannon9529
@christophershannon9529 13 күн бұрын
Is this the same for 2021 ktm duke 125 ? Looking at buying a stolen recovered one , was worried it would cost a fortune to get the keys reprogrammed ? Any help would be appreciated
@motorcyclerescuer
@motorcyclerescuer 13 күн бұрын
It dosnt have coded keys. So will just need a new ignition. It's fairly easy to do
@projectclark123
@projectclark123 13 күн бұрын
Hey how's you
@motorcyclerescuer
@motorcyclerescuer 13 күн бұрын
All good Georgie. How you doing mate?