😂😂😂Thank you for your reminder. The title has been corrected.

Yes, it can weld, just set the parameters to: preheat 10 ms, interval 10ms, pulse greater than 40 ms, continuous welding times set to 1

Hello, you can purchase through this link: www.aliexpress.com/item/1005006500904983.html

Great suggestion, thank you!

Great!

Hello, this device has CE certification, and the CE mark is on the packaging box.

www.aliexpress.com/item/1005006283941742.html ，please click this link. There is a software download method in the text description.

Hello, it is not available in India, you can order from Banggood, whether import duty is required you can consult banggood's customer service.

Thanks for your suggestion, maybe there will be one in the future. Or you can buy this 10Mhz oscilloscope multimeter: www.aliexpress.com/item/3256806230804230.html

hi, you can watch this video, there is no background music : kzbin.info/www/bejne/bprEgmtridmirMk

For better display effect

This oscilloscope probe uses a new generation of MCX high-performance copper plug, which has better performance and more convenient operation.

Application for ET602: osc.focussz.com/tooltop/ET602

Hello, you can contact our technical email: [email protected]

@@TOOLTOPInstruments Hi, I have sent 3 emails already but no response

@@reginaldxxx24 Hello, we have reminded the technical team to check. Please wait a moment

Thank you for your suggestion. This is the download link of the manual. docs.google.com/document/d/1MTOQbshE7PZgw4Ebws1lTHXahN5pkuL-/edit?usp=sharing&ouid=105166348587049550021&rtpof=true&sd=true

Hello ,here is the calibration operation and user manual drive.google.com/file/d/15_Uz4AjeubtOqb8C_9mEXWmQezg5bkB6/view?usp=sharing Please Enter the self calibration step; Click the▲/button, refer to the calibration point comparison table on the manual ,and select the steps that need to be calibrated

Thank you for your support!😄

Yes

1236/4578 each sends a set of signals. The pairing of the two sets of signals has the best hunting effect. 1236 or 4578 alone will have weak points, but it can also be used. It find TWO-pair copper cable in 100 meters. If one end of the wire is connected to a switch,please adjust line finder strength to maximum. Built-in 3.7V lithium battery, Type-C charging

here is the purchase link for macro lens:www.aliexpress.com/item/1005006685103304.html

Thank you! I will order one.

Hello, the network cable pairing function does not support testing shielded cables

Hello, thank you very much for your valuable advice. Usually most of the displayed configurations can be improved by updating the firmware. 1. Regarding the 4th point, you said that modifying the temperature range has no effect. The low temperature range is suitable for Temp ≤120℃, while the high temperature range is suitable for the temp ≥120℃. If the temperature range is selected incorrectly, it will lead to inaccurate temperature measurement, unclear imaging and other problems. 2. It can automatically switch gears in the automatic temperature gear (when you see a pause of about 10 seconds on the screen, it means the machine is switching gears). We also recommend that you use the automatic temperature setting. The temperature level is only visible in the settings interface and will not be displayed in the thermal imaging interface. 3.In the thermal imaging state, the "AUTO" displayed in the lower left corner does not mean the automatic temperature range, but means that the multimeter is in the automatic measurement state. You can measure parameters such as voltage, resistance, etc. in the thermal imaging state. The measured results are will overwrite the position displayed by "AUTO".

Thank you for purchasing our product, I will let you know if there is new firmware.

hi, it can only record the voltage data.The protective cover will be updated in the next generation of products.

We truly appreciate your suggestion, and your support serves as our driving force to progress.