@@dugy40 this is PLA, and the app lets to configure this spring structure to be reliable and flexy
@Koda_3614 күн бұрын
That is super cool 👍
@Posmetyev14 күн бұрын
@@Koda_36 Thank you!
@rasmik1919 күн бұрын
Когда они выйдут? 16 i 13
@IgnaczLaszlo-ProfiTetoАй бұрын
Dear Posmetyev, i bought the app and its fantastic. But the bottom side of my prints looks goofy (way too many strings, not fully aligned), the upper side looks nice. Have you met this problem? What kind of settings should I use in Cura for good result?
@PosmetyevАй бұрын
Thank you for your kind words! Yes, there are such problems with strings on the upper surface, but this is not related to the program, but for any models, when the upper surface has many details. In my experience - the type of plastic has the greatest effect on the formation of strings. Even in the plastic of the same company ESUN PLA+, the formation of strings strongly depends on the dye. The red color gives the most strings. Some colors are obtained without strings at all (as I remember, light green). In recent months, I have been printing from three-color PLA plastics, it seems they do not give strings at all. Therefore, the easiest way is to experiment with other plastics. You can reduce the strings a little more by selecting the nozzle temperature, the retraction value and the printing speed. But on many types of PLA, the upper surface immediately turns out well, you do not even need to select the parameters.
@IgnaczLaszlo-ProfiTeto27 күн бұрын
@@Posmetyev Thank you! You were absolutely right!
@Posmetyev27 күн бұрын
@@IgnaczLaszlo-ProfiTeto Oh! I knew all the problems were because of the dyes! )
@Francois_DupontАй бұрын
must be real fun gift for the kids! very cool project.
@PosmetyevАй бұрын
Thank you very much!
@rasmik1919 күн бұрын
When will the program be released?
@marcelguinhos9022Ай бұрын
Which kind of filament?
@PosmetyevАй бұрын
Esun PLA+ White filament
@user-rm6rc9dk3nАй бұрын
Супер ! А можно сделать механизм сзаводом и медленным вращением один оборот в минуту например
@scorpio1124Ай бұрын
А цены???
@The_king34932 ай бұрын
can i please get the file directly
@mahmoudaboudaher71732 ай бұрын
Paid in cults3d and did not get the file. How should i resolve this issue?
@Posmetyev2 ай бұрын
Dear Mahmoudaboudaher7173! Please write to my email [email protected] I think we solve this problem
@mahmoudaboudaher71732 ай бұрын
@@Posmetyev i did. Did you receive my email?
@Posmetyev2 ай бұрын
@@mahmoudaboudaher7173 Yes, I just replied to your mail
@mahmoudaboudaher71732 ай бұрын
Thank you for your support. The best
@user-si3np3vk5j2 ай бұрын
А надпись можно? Как смотреться будет жаль не показали
@nishanthraghul14992 ай бұрын
Hi, how to download this program in pc
@Posmetyev2 ай бұрын
Thank you for your interest! You can purchase the program here: cults3d.com/en/3d-model/gadget/app-to-create-decorations
@marcosgomes31403 ай бұрын
VERY nice!!! Can I run it on Linux?
@Posmetyev3 ай бұрын
Thank you!!! This app is for Windows only (Windows 7, 8, 10, 11). But several people wrote to me that they successfully use my programs under MacOS using additional WineHQ program
@brau3D3 ай бұрын
App mold pots?
@brau3D3 ай бұрын
Algun demo?
@danialjavann87543 ай бұрын
As always, you created a masterpiece. Very beautiful and professional. continue
@Posmetyev3 ай бұрын
Thank you very much, Daniel!
@kwanch1973Ай бұрын
Where can I download the apps?
@PosmetyevАй бұрын
@@kwanch1973 Dear Kwanch1973! Thank you very much for your interest in my program! If you make a purchase on this page, you will be able to download a ZIP archive containing an EXE file - a program for creating string art. cults3d.com/en/3d-model/gadget/app-to-create-string-art
@kwanch1973Ай бұрын
@@Posmetyev do u have Mac versiom ?
@donutgoma3 ай бұрын
Fast and Cool!
@Friendroid3 ай бұрын
It looks like you have just solved Christmas 2024 for me in terms of gifts!
@Posmetyev3 ай бұрын
I will be glad if the program helps you with this)
@dr9amre3 ай бұрын
can i buy it with no patreon?
@Posmetyev3 ай бұрын
Thank you for your interest! You can only subscribe to Patreon for one month and then unsubscribe, in which case you will not only download this, but also several other programs. Or email me directly [email protected]
@sambcg3 ай бұрын
Cool, you can create a whole gift shop from the concept of your app :)
@Posmetyev3 ай бұрын
Thank you, great idea)
@noanyobiseniss74623 ай бұрын
Still waiting on your scanner to stitch into 3d models!
@Friendroid3 ай бұрын
Amazing apps, thank you.
@Posmetyev3 ай бұрын
Thank you!
@roderickduncan63574 ай бұрын
*PromoSM* 😻
@GoingtoHecq4 ай бұрын
No doubt this is amazing
@Posmetyev4 ай бұрын
Thank you very much!
@Ylamona4 ай бұрын
Здравствуйте. Все так же 300 рублей стоит программа?
@@Posmetyev написала. Если всё-таки последняя буква N, а не V
@user-cz4vh9ku7t5 ай бұрын
Умница! Молодец!
@alliefoster5 ай бұрын
And another thing I was reading note from you about the issue I was having when patron locked me down now I can't find it. That's twice that had happened to me.
@alliefoster5 ай бұрын
Lol ig I got in a hurry because I see yours is hollow and mine had infill.... Was I supposed to turn on base mode?
@Spookjuhh5 ай бұрын
Whoa... ❤
@alliefoster5 ай бұрын
I immediately tried printing this and have a problem. Slicer says and shows the sectors have floating regions and I need supports or reorient. I had downscaled so I started there. Nothing has changed it. I've tried everything can think of even printing all the way and the side with loop are fine but nothing in other side.....
@kabelaw30095 ай бұрын
Hi Designer, i just downloaded your app for cookie cutter 3D printing, however, i have a few questions: 1. is it the app only have 2 standard cookie shape which is rectangle and heart, can i create my own shape and print it? 2. i tried to create my own design including the cookie sharp and text then upload it to your app, however, the preview shown me that it can't indicate my text clearly, how can i fix it? 3. after i press the bottom "create stl", i don't know where to find my generated stl file, please advise, thanks. Looking forward to have your reply, thanks.
@Posmetyev5 ай бұрын
Dear Kabelaw3009! Thank you for downloading the app! Thank you for such detailed questions! 1) Yes, you can create a cutter of your own shape. To do this, you need to find a JPG with a black silhouette on a white background. There should be no white spots in the black silhouette. Then we need to press the button in the “Open Silhouette Picture” program. The program will create a cutter along the contour of this silhouette and allow you to write text inside. 2) About the text. If you upload your own picture with text (not a silhouette, but in the second mode “transfer photo to cookie”), the program tries to turn the photo into lines, and the text looks bad. It is better to use the first mode (silhouette + text) Perhaps I should make a mode in the program so that the black and white image uploaded by the user turns into cutter protrusions (I thought about this, but for an arbitrary picture the protruding areas would be too large a plane, not thin and sharp, and I was not sure will it be good for squeezing on dough). 3) The program is made with a minimalistic interface (this is both good and bad). Therefore, the program writes the result to the same file amazing.stl each time. Please check the amazing.stl file (in later programs the date and time is added to the amazing.stl file so that the file is not overwritten) Thank you very much for planning to use the program for real. I hope that the program will allow you to successfully create cookies. And in any case, I will take into account your questions when further developing the program. Please write to me if you have any further problems.
@kabelaw30095 ай бұрын
HI Designer, really thanks for your quick reply, really appreciated. I have uploaded my own design (cookie cutter shape only) which you mentioned in point 1, however, i found it only allow me to input text in English, and can't input text in Chinese text, is it possible for me to input Chinese? And then, i tried another way, which is i made a jpg file including the shape of cookie cutter and text, however, your preview screen also can't show the result....oh my god > <" Also, can i set the size of the cookie? Many thanks for your help and looking forward to have your reply. @@Posmetyev
@royan.jdm25 ай бұрын
I need this file ,how can i get it and ill combine with a flywheel so that the strokes will be slower like real engine..thanks
@cemenaka6 ай бұрын
ВОПРОС?! А кольцо крепления - не слишком маленькое (ломкое, хрупкое)?! Или можно, как-то его увеличить?!
@Posmetyev6 ай бұрын
The ring is very durable, it has not broken on any of my keychains. The program allows to create two types of eyelets - regular and large with double diameter
@cemenaka6 ай бұрын
@@Posmetyev Вы сами от куда, что бы перевести деньги за программу?! карта Сбер или ВТБ есть?
@kenbooth5246 ай бұрын
Download this and windows wont let me run it???
@Posmetyev6 ай бұрын
Dear Kenbooth524! Thank you for your interest in my programs! This is one of my three most popular programs; now more than 2000 people are using this program. Could it be that when you start the program, a Windows warning like this appears? ibb.co/vxtWkzM In this case, please click “More info” and “Run anyway” Many people believe that Microsoft is engaging in unfair competition. Now Windows displays such a window for any program that was not developed by Microsoft.
@alexandarsimeonov52916 ай бұрын
You made first hydrogen engine 🎉🎉🎉🎉
@Posmetyev6 ай бұрын
Absolutely)
@alejandroaguilar52176 ай бұрын
Hola, que impresora usas? y ¿cuál recomiendas? Saludos desde Chile
@Posmetyev6 ай бұрын
Hello to sunny Chile! ) I use one of the simplest printers, TronHoo t220s. My programs are designed for the most common FDM printers, with default print settings (PLA plastic, layer height 0.2 mm, layer width 0.4 mm, print speed 10-80 mm/s). Many owners of the most common printers wrote that they print well: Prusa, Creality, Anycubic, FlashForge, Bambulab.
@babaika2376 ай бұрын
Здравствуйте, не могли бы вы подсказать, где можно скачать шесть других моделей двигателей?
@realspacepro6 ай бұрын
how do you get it for freeeeeee
@realcammyseam1-qj5px7 ай бұрын
Would it be possible to make one without a propeller so you can attack your own accessories? (Great work BTW)
@Posmetyev7 ай бұрын
Thank you for the kind words! What do you think about this engine? kzbin.info/www/bejne/hKeso4WslpyBrNksi=wCZYiGepoYHh2JyM&t=469 I used this engine to make a car with a balloon power source. kzbin.info/www/bejne/i5KapJmued2YfLMsi=uCayI7X81yXvh3G8&t=154
@realcammyseam1-qj5pxАй бұрын
@@Posmetyev Thank you very much! These are exactly what I was looking for!
@JeanphiliphChow7 ай бұрын
Just purchased your software, I type in "Football" and "Creativity" on the software and the software just keep loading. May I know how can I make it work?
@Posmetyev7 ай бұрын
Dear Jean-Philiph Chow! Thank you for downloading the program! On some computers, graphics may stop updating, but the program continues to work and outputs the result to the Amazing.stl file. Please look, if the inscription “Ready” appears in large letters at the bottom left, it means the program has completed its work and written (overwritten) the result to the Amazing.stl file. Please write me if the problem continues.
@BrickEngines7 ай бұрын
it seems like it has a bit of friction, it can be reduced by flipping the cylinder or the piston by 90 degrees in the slicer
@Posmetyev7 ай бұрын
Wow! Nice Lego engines!
@robertocanal70377 ай бұрын
Hello my friends I download your program but when I try to create a stl pops up "access vaiolation"
@Posmetyev7 ай бұрын
Dear RobertoCanal7037! Thank you for downloading the program! Were you able to run the program? I see that your comment has disappeared, so I guess everything is ok. Typically, such problems occur if you run the program from an archive, so it is advisable to first unzip it into any folder.
@Posmetyev7 ай бұрын
Please write to me if you still have a problem
@bilalalawwir17108 ай бұрын
Hello, I purchased 2 apps and planning on purchasing more but I have a question before I do so! Can I sell the 3d printed parts generated by the apps? Thanks in advanced for your response!
@omargdottin8 ай бұрын
Did you know where to find body's for this bublehead
@Kady3DPrinting8 ай бұрын
Impressive
@Posmetyev8 ай бұрын
Dear Kady! Thank you for your kind words) I have been a fan of your channel for a long time! Can I send you this and my other programs for you to experiment with?
@theMerzavets8 ай бұрын
Здравствуйте! Спасибо за ваши труды! Каким образом я могу приобрести ваши программы, находясь в России? Cult3d выставляет цены в рублях, но, по сложившейся за последние почти два года традиции, отказывается принимать мои деньги 🙂
@Juegon8 ай бұрын
hello, i bought the app. do you have any tips for printing? i don't know if i'm doing something wrong but the spring breaks very easily.
@Posmetyev8 ай бұрын
Dear Pitupiturria! Thank you for downloading the app! To make printing easier, I made a "Spring Rigidity" option in this program. If it is increased from 55 to 100%, the coils of the spring thicken, increasing the contact area with the stage, which simplifies printing. The following tips may help you print this model: - it is advisable to print with 100% filling so that the spring is strong and the head is heavy; - this model must be printed without supports (the supports are difficult to separate from the spring) and for the model to lie on its back - it is advisable to carefully separate this model from the substrate so as not to break the spring. - perhaps you are using a fairly fragile type of PLA. For most PLAs, especially PLA+ from ESUN or Prusa, the springs are very strong. Please write me if problems continue. Thank you for your feedback!