Ай бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
9 ай бұрын
9 ай бұрын
9 ай бұрын
Пікірлер
@032254855 Күн бұрын
awesome video mate could chuck some thread tape on the thread for the caps on the drive flanges might help keep water out
@TheNorthernExplorer 19 сағат бұрын
Thanks! That’s a good idea! Cheers
@myke0703 6 күн бұрын
Great job mate, thanks for sharing. I wonder if you removed the anti-roll bar forever.
@TheNorthernExplorer 6 күн бұрын
@@myke0703 thanks mate, I think it would be okay. The Range Rover classics didn’t have anti roll bars but it would be a bit wobbly. I only run a front arb and it’s fine for me
@oxdudepoege 6 күн бұрын
How many liters per 100km does your Disco consume on average?
@TheNorthernExplorer 5 күн бұрын
I’ll be honest It’s between 7 and 9 litres per 100km though I don’t check it very regularly. For me it’s more smiles per gallon than miles 😀
@oxdudepoege 5 күн бұрын
@@TheNorthernExplorer 7-9 is great. I drive a 2001 petrol jimny 1.3Liters 86Hp and cant get this thing below 10-11. So trading the jimny for a disco wouldn't be a bad idea i guess.
@TheNorthernExplorer 5 күн бұрын
@@oxdudepoege sorry I worked that out wrong, it’s more 9-11 for the disco
@oxdudepoege 5 күн бұрын
@@TheNorthernExplorer nonetheless 9-11 diesel is still better since this is the bigger more capable car.
@garviere 8 күн бұрын
Surely that’s not M5! Must be M10 at least!
@TheNorthernExplorer 8 күн бұрын
Just watched it back and I think you might be right! Maybe the cold got to me 😂
@032254855 9 күн бұрын
just got my truck back from the garage they put hd axles and flanges on the back and used some horrible looking silicone as a gasket on the flanges and charged me a small fortune will do it myself from now on
@TheNorthernExplorer 9 күн бұрын
That’s the reason I do it myself, most places I’ve been have done a poor job. Have a go yourself and if you ever break down you can fix it yourself 👍
@r0tekz 10 күн бұрын
I just broke my seal puller trying to get the seal out. For you, it looked easy.
@TheNorthernExplorer 10 күн бұрын
@@r0tekz oh wow it must have been well in! Only other way is to chisel the seal
@r0tekz 10 күн бұрын
@@TheNorthernExplorer I have ordered a stronger seal puller!
@TheNorthernExplorer 10 күн бұрын
@@r0tekz hope it does the trick 👍
@mclafton 15 күн бұрын
Beautiful
@TheNorthernExplorer 15 күн бұрын
@@mclafton thank you
@shehansurvival4971 18 күн бұрын
What size socket
@TheNorthernExplorer 18 күн бұрын
Socket is a 52mm
@kingtevaru 20 күн бұрын
nice video well done
@TheNorthernExplorer 18 күн бұрын
Thank you
@carltonr3417 23 күн бұрын
I personally wouldn’t be raptoring the body work. It ages the car terribly I reckon and I’d hate to think how much work it would be to revert back to a smooth finish.
@TheNorthernExplorer 23 күн бұрын
@@carltonr3417 I’m only planning on doing small bits with the raptor I know what your saying but I think it could look quite good
@SiCrewe 23 күн бұрын
Do you plan on painting the roof/bonnet black or using the "tintable" Raptor paint? I've seen a few examples of vehicles painted using the tintable Raptor and the results were always a bit... strange. Worst one was a Zambezi Silver Disco' and, although the owner seemed happy with the result, the paint was just a sort of dark battleship-grey. I've also seen a green Defender painted with Raptor and it just looked like it'd been painted NATO OD. Personally, given that there's probably no chance of getting anything like a colour-match, I'd probably use black Raptor and then it'll at least look like it was intentional, rather than just looking like I screwed up the colour.
@TheNorthernExplorer 23 күн бұрын
@@SiCrewe yeah I’ve never really liked the look of tinted it always looked a bit naff, my plan is to just paint the centre of the bonnet in raptor black and keep the normal paint on the edges
@Egirk 23 күн бұрын
Good luck with the new direction Dan!
@TheNorthernExplorer 23 күн бұрын
@@Egirk thank you
@bigtone2005 23 күн бұрын
From what iv seen on other videos you'll need a fair few of those rollers as they clog up quite quick. Iv always wandered what texture they would give roller with the gloss rollers if you fancy doing a comparrison 👍🏽 look forward to seeing more progress.. Be interested in seeing the grill video also 👌🏽
@TheNorthernExplorer 23 күн бұрын
@@bigtone2005 I’ll see how I get on with the small jobs first but could do a test on the roof.
@leeparker5827 24 күн бұрын
Nice job what thickness place is this cheers
@TheNorthernExplorer 23 күн бұрын
Thanks, I think it was 3mm plate
@rosscoupland5833 25 күн бұрын
Got a reverse bulb out mate :) Nice work
@TheNorthernExplorer 25 күн бұрын
@@rosscoupland5833 haha yep it’s been out a while 😂
@robertgrant07 29 күн бұрын
Yes Bruv great work so far. I have to do the same thing. You’re scaring me.
@TheNorthernExplorer 29 күн бұрын
@@robertgrant07 haha thanks, don’t be scared it’s pretty straightforward. Just take each step at a time and you’ll be fine 👍
@SiCrewe Ай бұрын
Good thing about having a Land Rover is that when motivation DOES strike, there's always something to sink your teeth into.
@TheNorthernExplorer Ай бұрын
@@SiCrewe oh I have a good few projects lined up! I just need some time to get them done
@camelk464 Ай бұрын
Lancaster?
@TheNorthernExplorer Ай бұрын
@@camelk464 yeah, well Morecambe 😀
@sleepycatpictures1176 Ай бұрын
Mm, simple fix. Good. Disco 2's have a harmonic balancer on the rear axle. Perhaps it was fitted to reduce vibration?
@TheNorthernExplorer Ай бұрын
@@sleepycatpictures1176 maybe! The d1 had one on the front axle but I removed it, didn’t make any difference in my experience
@SiCrewe Ай бұрын
My last Defender sometimes made a noise like it was "dragging a chain behind it". It wasn't subtle either. It sounded like there was a 10ft length of anchor chain dragging along behind it. Spoke to several LR specialists and nobody had ever heard of the issue. Took a couple of them for a drive and they were baffled by it. Even went as far as having somebody else drive it while I hung out of the back and tried to see underneath. Hard to believe that something so distinct was something nobody had encountered before. Never did find out what it was because somebody kept pestering me to sell it and eventually I gave in and flogged it.
@TheNorthernExplorer Ай бұрын
@@SiCrewe haha it drives me crazy when it’s a noise I don’t know
@Kris-jk9mq Ай бұрын
9/10 was the front output wobbling around..I wrote on Discoweb all about this.. AND how to fix all these issues as I have 'tuned' a D1 to 75mph+ smoothly while Lifted.. The factory 30 degree clocked Front driveshaft was also a pretty bad idea LR corrected in the D2's and many people like me put on their D1's
@TheRealMeowMeowShow Ай бұрын
13:54 Cheers boys! Nice!
@TheRealMeowMeowShow Ай бұрын
That viaduct! Awesome!
@TheRealMeowMeowShow Ай бұрын
Wow this is amazing! I can only imagine on a clear day!
@TheRealMeowMeowShow Ай бұрын
Loving the transistions and the music! !🔥I know you had fun maknig this one!
@TheNorthernExplorer Ай бұрын
@@TheRealMeowMeowShow it was a video that got me thinking more about what I film 😁
@sleepycatpictures1176 Ай бұрын
Erm, no, sorry . . . procrastination is my middle name . . . !
@TheNorthernExplorer Ай бұрын
@@sleepycatpictures1176 haha same here, I put everything off
@davidyeates5525 Ай бұрын
Very true 👍🏻
@TheNorthernExplorer Ай бұрын
@@davidyeates5525 😁
@nealeford1964 Ай бұрын
Love it!
@sirsouping Ай бұрын
Heartside over the Pennines
@TheNorthernExplorer Ай бұрын
@@sirsouping I’ll have to look into that one 👍
@sirsouping Ай бұрын
@@TheNorthernExplorer thanks man l I like your channel btw
@TheNorthernExplorer Ай бұрын
@@sirsouping thank you! Really appreciate it
@sirsouping Ай бұрын
Im quite glad for this because i want to work in a garage in the future
@TheNorthernExplorer Ай бұрын
@@sirsouping thank you
@craigaitken262 Ай бұрын
I thought you had a yellow canary in your hand 😂
@TheNorthernExplorer Ай бұрын
@@craigaitken262 haha 😂😂😂
@baptistebatiste4240 Ай бұрын
Bonjour ou avez vous acheter l’outil de levage?
@NarutoUzumaki-Nam Ай бұрын
Beautiful!! Just perfect!
@TheNorthernExplorer Ай бұрын
@@NarutoUzumaki-Nam thank you
@ThemLadsOutdoors Ай бұрын
Nice one mate 💪
@TheNorthernExplorer Ай бұрын
@@ThemLadsOutdoors cheers 👍
@nealeford1964 Ай бұрын
Fantastic video and a fantastic effort! I hope Grandad would be proud of you. Has it inspired you to do more challenges or has it put you off for life?
@TheNorthernExplorer Ай бұрын
@@nealeford1964 thanks neale! I’ll be honest when I’d finished I said never again but now we’re looking at the national three peaks 😂
@chriswalker4272 2 ай бұрын
A good how to vid thanks. If you had moisture getting into different from hub, then the inner shaft seal would need to be leaking, and some oil would have come out of the bearing too. I didn't know you could get heavy duty drive flanges, maybe some thread lock on the nut would stop it escaping 😃
@TheNorthernExplorer Ай бұрын
@@chriswalker4272 thanks Chris, that is a good point 👍
@1ELforce 2 ай бұрын
Can you please tell me how you fit the Disco 2 grills on the Disco 1 bumper?
@TheNorthernExplorer Ай бұрын
@@1ELforce the grille is a pretty straight forward fit, it does touch the bumper and requires a bit of modification where the headlight trims fit.
@1ELforce Ай бұрын
@@TheNorthernExplorer I will put the disco 2 grille this week, that’s why I am asking
@nealeford1964 2 ай бұрын
Lovely place to spend some time. The salmon would be brilliant to see
@TheNorthernExplorer 2 ай бұрын
@@nealeford1964 yeah I think we will return for the salmon, maybe include a camping trip
@inquisitiveexplorerlee3299 2 ай бұрын
👍
@Reaper4367 2 ай бұрын
nice way to stay fit and healthy. Cheers for taking us along.
@TheNorthernExplorer 2 ай бұрын
@@Reaper4367 thanks! It’s a bit of extra training for the Yorkshire 3 peaks
@fernandomamede6011 2 ай бұрын
great job there! loving those backlight grills, where did you get them?
@TheNorthernExplorer 2 ай бұрын
Thanks! The rear Grills were already on the car when I bought it. I’m not sure where you might buy them
@mclafton 2 ай бұрын
😮is it yours?!?
@TheNorthernExplorer 2 ай бұрын
@@mclafton not mine, it’s my dads. Would you like to see more?
@mclafton 2 ай бұрын
@@TheNorthernExplorer who wouldn’t like to see more classic jag?! 😂
@TheNorthernExplorer 2 ай бұрын
@@mclafton I’ll see what I can do then
@Reaper4367 2 ай бұрын
Good to see! i cant do paypal, long story. I'll see if i can 'donate' through Patreon. If i am able, would that be acceptable?
@TheNorthernExplorer 2 ай бұрын
If you send me an email I’ll sort something out for you 👍
@sflynn3867 2 ай бұрын
As random as this sounds, check the bolt holding the front wing to the bumper and check the bracket concerned as well.
@TheNorthernExplorer 2 ай бұрын
@@sflynn3867 ahh yeah I know what you mean! I’ll have a look at that, cheers
@StuM0OVG 2 ай бұрын
Nice one 👍 I’ve just ordered my sticker, And I’ll put it on the back of my Disco.
@TheNorthernExplorer 2 ай бұрын
@@StuM0OVG thanks very much! I’ll get it posted out tomorrow for you 👍