Mine on 6s is much more controllable; you might consider turning up your gyro until it speed wobbles then backing off a bit 👍
@saadshah5513Күн бұрын
i have the obdeleven and a MK7 golf TDi. will this audi coding thing and throttle response work for that and lastly, is it safe?
@testing3166Күн бұрын
Wow this looks cool. I'll have to join this year.
@shananboiara3 күн бұрын
Damn it, man, you're my hero! With my Acer Swift 3 notebook, I: 1 Uninstall USB devices 2 Unplug the power cable 3 Hold the power button for a long time + swipe down to shut down 4 Wait 5+ minutes 5 Boot, and voila!
@omartorres56265 күн бұрын
So I can’t record vertical
@nickevans31905 күн бұрын
Also if you change the orifice nozzle to 1.1 you'll get thicker foam and even thicker foam exchanging the filter for the mjjc filter 2 pieces of wire mesh filters withthe foam insert
@waynemack66376 күн бұрын
These are like those Record Breaker cars from the late 80's early 90's. Get out of town!
@mitchyork5278 күн бұрын
cool looking track
@3DRCRACER8 күн бұрын
Smoothies always work, at least on the track I race at. They just don't last very long so I normally run AKAs. But if you don't want to fight for traction smoothies are the way to go.
@kevinjones36818 күн бұрын
Where is this
@TrokaRC8 күн бұрын
👍
@johnmiller45538 күн бұрын
🤙🤙🤙🤙🤙
@simonj1269 күн бұрын
Clean, smooth, no mistakes......aannnnd you spin out lol. Love the videos
@alexr90309 күн бұрын
Nice content as always John , thanks again for doing this it brings good memories of that weekend. By the way at 19:25 You speak of 40 something lap at the end of heat and this happened to a couple of racers that weekend myself included , next time for sure come see us and we will speak to the race director to correct this. On the last race of 4wd it happened to me I was first from start to finish and no one I know passed me and I was missing a lap.
@alexr90309 күн бұрын
Nice run John impressive after you changed to smoothies 2 , you have way to much motor on your truck, you should change it with the motor in your 4wd and calm the brakes. Overall congrats, nice to see you as always. You did well
@netcruzer9 күн бұрын
The LRP 6.5T in this truck is a motor I used to race with in 4WD buggy back in ~2012. 😆 Still strong! I have a new 7.5T HW motor and XR10 pro to put in my Tekno 4WD just not done it yet.
@hlee91399 күн бұрын
Your stadium truck what motor do you have in it
@netcruzer9 күн бұрын
6.5T, turned down to ~80% throttle for here
@hlee91399 күн бұрын
@netcruzer I'm trying to get back in it again. What other classes you have for stadium
@netcruzer9 күн бұрын
Usually none, open Stadium Truck class in the races I've been to lately.
@donnienicholson1809 күн бұрын
EeeeYO!!
@jacodewaco10 күн бұрын
Why he wouldn't be competitive ? I like it so much .
@netcruzer10 күн бұрын
It's a 5 year old chassis now, and a lot of the competition has updated their 1/10 4wd buggies 1 or 2 times since late 2019.
@jacodewaco8 күн бұрын
I know ... but now is everybody on 13mm shocks etc ... but that was on it since the begin ... so i keep the faith in it ...
@LJoel10 күн бұрын
Ugh first to last in one corner. Glad im bot the only one that requires @&#&$ edits lol
@LJoel10 күн бұрын
You got robbed on that first run
@lucasalati36910 күн бұрын
Best video to get seasick
@alexr903010 күн бұрын
Nice video , unfortunately you helped your fellow Tekno Racer (Dave Hamelin) take the win I was already leading you by 1 lap and at 12:15 in your video you see that you crashed but overall I should have taken the lead a fly away but we then we jumped a little later and chaos came for me and You but this costed me the win . I know it's racing and Dave also knows it that he was lucky that weekend . He knows that win was a crappy one for him The race director was not calling anything so a tad hard for you to know what to do .. I also know you where fighting with Guillaume (blue car) and Steve Seguin and Dom .
@netcruzer10 күн бұрын
I do apologize for blocking you if you were a lap up on me. I had no clue who was ahead vs who I was battling with when we all clustered together at that last part of B2.
@alexr903010 күн бұрын
@netcruzer yes I know , no worries . I am all about learning and having fun at races and not focussing absolutely on results . I was prepared for this and on race #3 I gave you a sign for you to let me pass and everything was fine for this race
@j-1lokes29410 күн бұрын
What size turn motor.
@netcruzer10 күн бұрын
8.5T
@alexr903010 күн бұрын
@@j-1lokes294 netcruzer is running like he said a 8.5t but for me that's way to slow Most racers are running a 6.5t in 4wd mod at the ctsr and undergear them a bit
@j-1lokes2942 күн бұрын
It sounds like a good motor. Less turn motor is more torque less top end. Can you adjust timing.? Why not try mugen MSB1 ?
@paulpadilla528811 күн бұрын
Great racing......I could feel your frustration....😎👍
@apachko11 күн бұрын
You're a lifesaver, thanks a lot.
@gordonshaw324511 күн бұрын
So good to have the racing content back John. Thanks! Enjoy
@solidtactics11 күн бұрын
"Ah Dammit!" yeah... felt that one buddy. Tough luck.
@BC-rc11 күн бұрын
Damn foreigners, none of them have the decency to speak english!. Lol
@BC-rc11 күн бұрын
The 2nd run the battery seemed weak
@netcruzer11 күн бұрын
It was fully charged. I'm running a softening setting on my ESC, that's likely what you are noticing. It dulls the initial acceleration to prevent spinouts in 2WD.
@donnienicholson18012 күн бұрын
You may have to recruit yourself a translator sir!
@netcruzer11 күн бұрын
After that I tried to remember to keep going full tilt until I glance up and see all rows red on that TV. Also, besides race director not speaking my language, the finish tone was low so sometimes I could not hear it.
@endosrc12 күн бұрын
why stretch the .4 body onto the b7?
@netcruzer12 күн бұрын
I ran out of time and my paint colours to do the B7 body. B6.4 fit with some nose trimming well enough.
@j-1lokes29412 күн бұрын
Don’t need too. Get new ball cup just cut 1/8- 3/16 just enough to grab the turn buckle with some pliers and still save the ball cup. Great making more content.
@jayepps864612 күн бұрын
I’m east of Ottawa is that in Montreal by any chance? It’s a beautiful track woww
@netcruzer12 күн бұрын
It’s in Montreal region. Google Map CTSR it shows up
@jayepps864612 күн бұрын
@ awesome!! Thanks I’ll definitely check it out, thanks for your videos my buddy !
@mazzmo7712 күн бұрын
not a member or a flying club or not much experience by the looks of this video.
@mazzmo7712 күн бұрын
why are you flying it towards a kerb on a maiden flight in a carpark????
@CrystalPlantz12 күн бұрын
Very nice track
@patrickkennedy253313 күн бұрын
This is what i call a cake track . Its so good you want to eat it
@pepeparent973013 күн бұрын
Nicee ! sucks that i couldn’t make it to the race , hope i get to meet you at the next one ! The new layout is amazing, i tried it for the first time last Friday with my T6.2 and wow its my type of track 👌🏼
@rdr5realdapurrekaman59513 күн бұрын
Gazoo Racing TS050 2019 edition kit include super hard tire & PCABS Chassis, is more stronger than ABS Chassis (TS050 reguler)
@user-ez2bs3fq1x14 күн бұрын
How many inches tall is the action figure?
@paulpadilla528817 күн бұрын
That barrel roll was awesome.....😎👍
@Mrf38817 күн бұрын
That ramp edge shaver roll over the other shortcorse was epic!!!
@shuster192117 күн бұрын
Looks like a run what ya brung race, the most fun😉
@LJoel17 күн бұрын
Wednesday night racer has the skills
@kanhavanand20 күн бұрын
Nice... But an R is an R :)
@Kavika-xh1qj20 күн бұрын
Thanks! I was going crazy trying to figure out what that M button did. M for Massive! 😂
@dannyBryan-p7d20 күн бұрын
Can anyone help with setting epa please I’m struggling to find how after fitting a new steering servo 😅
@Maclah21 күн бұрын
This reminds me of my childhood. I remember racing these because of my cousin showing me the Let's & Go anime!
@LassoKid777721 күн бұрын
The track is real expensive to buy otherwise I would get back into it
@LassoKid777721 күн бұрын
When I was a kid these mini 4wd Tamiya cars were only $2-3 I had heaps of them, they're really cool