I just put this on a 2015 4Runner I notice little difference in bugs before and bugs after install.
@vaulmartinjr50052 ай бұрын
Thank you for sharing your experience and all the tips for installing this deflector as they came in very handy when I did mine yesterday.
@nashgamalinda53835 ай бұрын
Hey, so i just installed avs bug deflector on my 4runner too but after installing, it won’t latch on. Did you do any adjustments? Or you just push the hood down hard?
@papatriot98826 ай бұрын
Why not put those bump stops on the back of the deflector?
@vincesmith7648 ай бұрын
impressive on stock nittos.
@accord50 Жыл бұрын
Do you have any problems going through drive through carwashes ?
@bhduong2008 Жыл бұрын
Beautiful dogs. Thanks for the video.
@MotoVet86 Жыл бұрын
I know this is an old video, but did the deflector run on the top of the front fascia? I’m returning an avs one for that reason.
@BOBBYdigital312 жыл бұрын
if anyone is worried about sticking the bumpons to the hood, why not just stick em to the back side of the bug deflector instead?
@johnrpomeroy Жыл бұрын
Exactly my thought
@Mrguitarcraze2 жыл бұрын
Nice video, is the deflector rubbing against the hood and grill frame causing paint damage to the seam edges?
@4LOWeRUNNER2 жыл бұрын
Yes it is rubbing a little bit on the top of the grill but is completely covered by the hood deflector itself. Will be noticeable if I remove deflector though.
@Mrguitarcraze2 жыл бұрын
@@4LOWeRUNNER thank you. I’ve since purchased one and installed it. I chose to put 3M door edge guards on to protect the edges. 3M Door Edge Protection Film, 08582. Walmart had the best price. Thanks again!
@geraldjohnfernandez2 жыл бұрын
love the stance of your4runner. are you lifted? leveled? whats your wheel and tire spec? thanks!
@4LOWeRUNNER2 жыл бұрын
Yes, it's lifted 3" with Icon stage 7 suspension kit. Also, 1" wheel spacers and factory tire size.
@kevinnature37932 жыл бұрын
Looks fun. Love the articulation. Does yours have KDSS?
@4LOWeRUNNER2 жыл бұрын
No KDSS but I do have front and rear sway bars removed.
@MrCherrygrovedude8 ай бұрын
@@4LOWeRUNNERput the rear sway bar back on. You'll get more front articulation.
@OverlandPNW2 жыл бұрын
Absolutely beautiful rig! Keep the off-road vids coming.
@vincesmith7648 ай бұрын
Plz tell me how those terra grapplers held up to hard off roading?. i keep replacing on my trail edition because the factory ones were great.but no serious off roading for me... yet?
@walterdutra44902 жыл бұрын
Time to ditch the stock step plate and upgrade to an actual rock slider ... clearly you need it 🙂
@MegaThunthun3 жыл бұрын
Hey mike Thun here, nice videos! 👍👍
@westcoast7083 жыл бұрын
beautiful dogs and nice rig also .
@JV2203 жыл бұрын
Any mods at all?
@4LOWeRUNNER3 жыл бұрын
Stage 7 Icon suspension and 1" BORA spacers. In this video, it's completely stock though. You can see the upgrades in some of my other videos. I will be doing more upgrades soon.
@JV2203 жыл бұрын
@@4LOWeRUNNER what did that run you?
@4LOWeRUNNER3 жыл бұрын
@@JV220 Suspension was $4k and spacers were like $120.
@JV2203 жыл бұрын
@@4LOWeRUNNER sorry if you've covered this in other videos, but did you install that yourself? Does that $4k include labor? Oh, and how does it drive around town compared to stock?
@4LOWeRUNNER3 жыл бұрын
I'm not sure why I didn't see your question earlier. I installed everything myself. That was price for parts only. The vehicle handles amazing on the road. Honestly, I never thought hydraulic suspension could work so well. I am definitely satisfied with the performance. Even with 3" lift, it handles way better on the road over factory suspension.
@JV2203 жыл бұрын
That truck looks so sick on the trail.
@psx19863 жыл бұрын
Hey Mike, love the video. Just installed mines deflector too. Btw, what that basket on top of your roof rack?
@4LOWeRUNNER3 жыл бұрын
The roof rack is a Yakima Mega Warrior that comes with the 4Runner Venture, Land Cruiser and now 4Runner Trail that I know of. You don't have to purchase a vehicle to get one though. yakima.com/products/megawarrior
@psx19863 жыл бұрын
@@4LOWeRUNNER thanks!
@JGstunts223 жыл бұрын
I wish they made them to fit tight to the vehicle .. imo they look weird sticking way up so I decided to go with 3m vinyl protection instead . Good video tho
@4LOWeRUNNER3 жыл бұрын
WeatherTech does make one that is tight to the vehicle. It is the hood protector. What I install in the video is the hood deflector. Check out www.weathertech.com/toyota/2020/4runner/hood-protector/
@hyl1073 жыл бұрын
What's your long term review of this? Does a lot of dust/dirt/rocks get inside it, possibly leaving scratches and paint chips? I'm looking into deflectors or paint protection film, but gathering pros/cons.
@4LOWeRUNNER3 жыл бұрын
I hope to get a video done for a long term review but it may be a bit. No dust or dirt or leaves or anything like that gets stuck in mine. The only part I have noticed that rubs a little is on the top of the front bumper. It is scuffing a little but the deflector covers it. There is no rubbing or paint chipping on the hood at all. Just on the top of the bumper the deflector is rubbing because the fit is snug. I imagine with a little adjustment this can be avoided. Hope this helps.
@stewartnoks16954 жыл бұрын
Hey man, I got exactly the same 4runner couple weeks ago, what tires did you put on (size and brand)? Thanks for video.
@4LOWeRUNNER3 жыл бұрын
The tire size I have currently is stock 265/70-17. It came with the Nitto Terra Grapplers. Planning to upgrade to 285/70-17 Nitto Ridge Grappler or Trail Grappler now that I just installed my stage 7 Icon suspension kit last week. Video soon to come.
@stewartnoks16953 жыл бұрын
@@4LOWeRUNNER Very nice, did it go well with KDSS? How much lift did you get? I read that Toyota dose not recommend above 2" for KDSS.
@andyham60944 жыл бұрын
Man I get so many damn bugs all over my 4runner but hate the way these deflectors look but man I might have to do it purely for the function. Can’t stand having bugs splattered everywhere all the time
@4LOWeRUNNER3 жыл бұрын
I don't find too many bugs on my windshield so I guess it's doing its job. Haven't had any further rocks or stones hit either.
@chadgerman8794Ай бұрын
I live in Midwest and it doesn’t do much in the way of bug deflecting as far as I’m concerned.
@rickhoffart57584 жыл бұрын
Hi mike. I just installed this on my 2020 4Runner and noticed it being somewhat snug also. Have you made any adjustments or does it settle in. Thanks for the video.
@4LOWeRUNNER3 жыл бұрын
It does settle in after some time. My hood is much easier to close than when I originally installed. Sorry for the delayed response.
@JeffOgard4 жыл бұрын
Skip to 6:00 for actual video
@danielcozad81164 жыл бұрын
I only watched this to see if this is the deflector that I want to buy. Little did I know that I would learn how to wash a 2020 Venture. I think a better title for this video should be, How to wash a 2020 Venture and install a Weather tech defector all in one day.
@4LOWeRUNNER3 жыл бұрын
Yes, I should have done a lot more trimming. They will improve over time. Thank you for the feedback.
@stephenruether82164 жыл бұрын
Did you look at the low profile WeatherTech hood protector as well? if so, what made you decide to pick the one you did? I am trying to decide between the two. Thanks.
@4LOWeRUNNER4 жыл бұрын
I did originally get that by accident but I didn't want anything that actually attached to the paint on the hood. The protector is just to protect the front edge of the hood while the deflector is meant to deflect stones and bugs away from the hood and windshield. The protector attaches by adhesive on top of the hood while the deflector attaches by screws under the hood. I preferred the look of the deflector also.
@appleman8124 жыл бұрын
U think this will help with rock chips
@4LOWeRUNNER4 жыл бұрын
It is supposed to help deflect small stones and bugs but I image it can't stop them all. I imagine it does do some deflecting but doubt it's really noticeable. I suppose in most cases it won't prevent a rock or stone from hitting your hood or windscreen but it may change the angle of it enough to prevent a chip from occurring.
@TheOutdoorProfessor4164 жыл бұрын
Nice - just received mine today for a 2019 4runner ORP. Do you think installing the bump-ons on the underside of the deflector itself - maybe just a couple of them? I can see it would take a lot to actually push it down onto the paint.
@4LOWeRUNNER4 жыл бұрын
I wouldn't bother putting them on the hood but it is entirely up to you. That being said, I have noticed rubbing on the top of the grill, underneath the deflector, so maybe that is the place to put them but this may prevent the hood from closing. I'm going to look into seeing if maybe the hood can be adjusted a little to accommodate the deflector better.
@TheOutdoorProfessor4164 жыл бұрын
@@4LOWeRUNNER I installed today. I'll bet that the 3M adhesive back clear bra material could be used to prevent chafing in that area. I'll have to keep an eye on it. Thanks
@Rasmusen9810 жыл бұрын
Graphic card? :)
@zeeman70710 жыл бұрын
why didnt you get the 8350?
@RobertCarrizal11 жыл бұрын
i have FX-8350 HD7870 Was Unrealistic for upgrading brought it to me
@Vex33811 жыл бұрын
it really has nothing to do with overclocking the CPu - it is the graphics card.
@Maledis8711 жыл бұрын
I overclocked my 8150 to 4.2 ghz and bf3 ran good, then i tried to go for 4.8 ghz and now bf3 went from 60 average to 24 average. I used the graph for the in game monitor, and it showed that my processor was putting about 10 more power out. 8150 OC 4.2 watercooled gtx 660 msi twin frozer oc 8 gb 1333
@mirzamujkanovic11 жыл бұрын
Hey! Could you tell me should i get the FX-8120 like for gaming and sometimes recording because i saw many vids that lagged with this processor! and everyone one said that if you overclock it then it will stop lagging!?
@MylifeisaBmovie11 жыл бұрын
I found your videos after upgrading my gigabyte mb to a crosshair v formula z mb, while retaining my old amd 8120 processor. I like the vids and all the work you have done....gave me a few new ideas. As far as the negative comments you've received are from non builders. Mom and dad still buy toys for them.
@DataBase9111 жыл бұрын
do you test on SATA 2 or SATA 3, i have a Corsair Force 3 60GB SSD but my results is lower than yours, i think becouse i have SATA 2 connection sorry for my bad english :D:D what your think?
@topbhoy8811 жыл бұрын
plus choose european servers.. if i do a russian or american server it can get really laggy
@topbhoy8811 жыл бұрын
mate make sure you have the right drivers downloaded for bf3, either that it could be the servers you are in i get that sometimes. cant think of anything else after you told me!
@gingerpike711 жыл бұрын
what;s ur gpu?
@saschion11 жыл бұрын
Why you don't record with Fraps and how many FPS you have, when you recording with Fraps?
@emailme2311 жыл бұрын
That fan is really working
@SCHaworth11 жыл бұрын
Just in case it hasn't been answered yet, or for future visitors: HPC = Minimum+Maximum power states. There's no speed stepping in between. And if it has been said... o well, I said it again.
@4LOWeRUNNER11 жыл бұрын
In this system I have a Corsair H80 with a cold air intake. There are also two radeon 6790s.
@Bornmirri11 жыл бұрын
lol got to 5.1 GHz on the budget board 990FXA UD3 :D
@4LOWeRUNNER11 жыл бұрын
yes, without a cpu, your computer will not run. You need to have a cpu in order for the bios to post. Now that Piledriver is out I guess you either already know this or are about to find out.
@4LOWeRUNNER11 жыл бұрын
IronMikeAce but I haven't been on there in months. Full-time student and full-time employee doesn't allow for much play time.
@4LOWeRUNNER11 жыл бұрын
I am not sure but I think it is. If is AM3 socket or above and supports 125watt CPUs then you should be good. Just make sure you have the latest bios version.
@crackfirecmh11 жыл бұрын
hey i am building my own pc and i only have processor left to buy. i am waiting for amd piledriver cpus to comeout sometime this month. I m not sure if this is normal or not, when i turn on the computer, there is absolutely no dispaly. my monitor just says no signal. is there something wrong with my built or is it normal for a pc to display nothing with cpu. when it says no signal, its my monitor showing that message, not the cpu. please respond.
@jacka895211 жыл бұрын
What's your battlelog name i really wanna see your K/D