Is the “donor” car a 4 seater or did you take 2 “two” seaters to make the 4 seater
@ritchez4life2 ай бұрын
Just finished doing my turbo s. Came out real good!
@luisornelas42542 ай бұрын
Hi do you happen to have a list of parts? I’m wanting to do this myself and want to be as ready as possible.
@andrewcooper76084 ай бұрын
I just recently did this, but i lost my bumper off my old front end. Is there a bumper out there that will work ?
@oh51486 ай бұрын
😯
@chaunbrown13458 ай бұрын
Nice vid, I’m digging the commentary. Do you still have your ear? Have you don’t anything to the back lights?
@monroyu95199 ай бұрын
Did you upgrade the hood too?
@hadenoughofthisBS9 ай бұрын
Any chance you have a part number list of the 28 parts for those of us that can't get a donor car?
@jasong192910 ай бұрын
Where did u get the mounting on the back extra pipe
@jaysondehainaut251610 ай бұрын
Would a xp 4 turbo cage fit a rzr 1000s4 non turbo
@joelbarraza3944 Жыл бұрын
We're can I fine the part for the end of the cage on the back I installed the cage from a 2020 turbo s to a 2023 xp4 1000 there at tube at the end the it's missing a part and I see u have it on your cage
@paigeharshaw1491 Жыл бұрын
Looking to do this to my 2018 xp 1000. Have a way to get in touch or send a master parts needed list?
@EJfromNYC Жыл бұрын
I'm here stressed out because I can't remove the prop shaft from the front differential... 😂
@DawgThirstyGaming Жыл бұрын
Thx for the safety tips
@anthonydiaz8884 Жыл бұрын
can you do a conversion on the back end?
@shawnmatthews5118 Жыл бұрын
Show me how to make the cab a foot wider and a foot and a half longer.
@shawnmatthews5118 Жыл бұрын
I don’t need four seats, just room enough to stretch my legs.
@Junior-yh4cw Жыл бұрын
Couldn't you have just gotten the measurements on the xp 4 front frame and just used those to extend the xp front with some tubing and sheet metal
@ciprianofrancisco9798 Жыл бұрын
Can u do conversion on the back bumper?
@miguelmontes2712 Жыл бұрын
Nice will it work for xp4 1000 2018?
@moorepowergarage6205 Жыл бұрын
Yes. Your 2018 and the 2015 in the video use the same grill. So everything should be the same.
@miguelmontes2712 Жыл бұрын
@@moorepowergarage6205 yeah thanks it's what I was looking for better than changing to a newer one Thanks
@zacharyosborn3681 Жыл бұрын
I was interested i have a 2017 xp4 1000 turbo. Would a 2021 turbo s4 cage fit on it
@moorepowergarage6205 Жыл бұрын
Yes. The car in the video is a 2017. And all turbo S 4 cages are the same.
@OmarRodriguez-xu3lz Жыл бұрын
So preatty much nothing was fabricated an just swap parts!!
@moorepowergarage6205 Жыл бұрын
I only had to fab up some brackets because I used a newer wiring harness, but everything else was just bolt ons
@gojira62able Жыл бұрын
Hey buddy I got a 2018 xp4 1000 with a sport cage. Gonna buy a 2021 turbo s. Can I swap cages, I mean are the holes in the same place? Thanks in advance
@moorepowergarage6205 Жыл бұрын
Yes, the only problem you might run into is the turbo S dash is a little higher so if you have an intrusion bar or anything that runs alone the dash it might not work.
@97JoMiller Жыл бұрын
just found your channel and it looks like you gave up after 4 videos... any chance you're going to start posting again?
@moorepowergarage6205 Жыл бұрын
I've got some stuff in the works but I've also started a new job and had a 3rd kid so my free time to make videos hasn't been ideal.
@97JoMiller Жыл бұрын
@@moorepowergarage6205 congrats on the addition and job! Life has a way of getting in the way
@97JoMiller Жыл бұрын
wow, I can't believe the frame sections are just bolted together, that makes things a lot easier but I'd figure weaker... guess not.
@hillbillyhangover2 жыл бұрын
Another way is to let it sit in the sun for a while to get really warm then rub ATF on it. Rubs in gives it a dark finish without the streaks. I did this on my jeep fenders after I tried the heat gun and it turned out great. Awesome job on the vids!! Keep it up and keep them coming!!!!
@jacobgray37462 жыл бұрын
Damn that was alot of work big ups on ya man hope it all holds up!
@moorepowergarage62052 жыл бұрын
Thanks
@kyliehilton34262 жыл бұрын
Why is this so satisfying to watch? Almost passable - haha!
@6gatornation2 жыл бұрын
So I’m going to have to change my lower bumper mount Always something huh😂 You lucked up finding all that used think I’ll wait to see if I can do the same Don’t want it that bad to pay 500 Thanks for the video you’re the only one that answered both of my questions about the bumper and the cost Where did you find that used
@moorepowergarage62052 жыл бұрын
Azcycleparts they have an ebay store and lucky enough for me they're only about 2 miles away from where I work. They part out about 20 rzrs a year so their selection is always changing.
@6gatornation2 жыл бұрын
@@moorepowergarage6205 thank you
@whiterhinooutdoors45722 жыл бұрын
Damn it looks awesome
@whiterhinooutdoors45722 жыл бұрын
Awesome man lots of work went into this project
@tradesman10002 жыл бұрын
Stellar effort mate 👍🏻 looks great!
@334mafia42 жыл бұрын
Do you think I can do it to a Polaris ranger
@moorepowergarage62052 жыл бұрын
I've never looked into it but I would assume you could. All the suspension and drive train would bolt up to either frame. I'm just not sure if you'd have to replace the whole frame or just the front half like I did.
@334mafia42 жыл бұрын
@@moorepowergarage6205 ok
@334mafia42 жыл бұрын
Love it
@sebastianjimenez96712 жыл бұрын
By any chance you have the wire harness of the 2 seater for sale? I’m building my own RZR from everyone trash or stock parts and I still need wire harness and ECU among other parts, please let me know, thanks
@moorepowergarage62052 жыл бұрын
I built all of my spare parts and my left over 2 seater parts into a rolling two seater. I sold the wiring harness with it. But you could try AZ cycle parts. That's who I use for most of my uses parts.
@sebastianjimenez9671 Жыл бұрын
I don’t know also what’s the order or how to connect the battery, the starter cables, the starter solenoid and the two wires that comes from the voltage regulator, I been trying to pause your video 😂 but is hard to see. Once again thanks you very much.
@joebidden49142 жыл бұрын
Did you have to update any sensors when going to newer year wiring harness?
@moorepowergarage62052 жыл бұрын
The 4wd switch and the exhaust 0² sensor had different connections but that was it.
@joebidden49142 жыл бұрын
@@moorepowergarage6205 so the front differential was the same just for the switch plug? Awesome thanks man! They don't make an AEM infinity for the 2014-2015 anymore so I've been wanting to change stuff out possibly in case I need the aftermarket ECU.
@brianreynolds52462 жыл бұрын
tire shine works better
@ajrhodes1002 жыл бұрын
With the s cage does it reduce height of roof?
@moorepowergarage62052 жыл бұрын
I don't believe so. It still feels the same height as the original. My father is 6'4" and still fits with a helmet no problem.
@The1992lsvtec2 жыл бұрын
Isn’t the vin number on the front frame? So now you have two different vins on it now?
@moorepowergarage62052 жыл бұрын
The main stamped vin is on the rear frame. The front frame only has a vin sticker which sometimes falls off. But you are correct I currently have two vin numbers however I only have a title for the rear one.
@chrispohl71852 жыл бұрын
Good job I'm definitely in the same boat with another kid on the way
@chrispohl71852 жыл бұрын
People always forget there own time! Your own time is also money invested!!
@reesemcgee7082 жыл бұрын
Is that a larger gas tank than the factory 9.5 gallon? Seems larger.
@moorepowergarage62052 жыл бұрын
It's the factory 9.5 gallon tank.
@cjbajaboy352 жыл бұрын
Awesome video Jason! I am going to be attempting to convert my 2016 rzr turbo to a 4 seat and was wondering do you have a way I can get in touch with you to ask you a couple questions about your swap?
Awesome video brotha I loved it man you make it seam so easy and you have the best team them two manage very well lol
@brianhancock11212 жыл бұрын
Would the cage and doors work off of a 2021 RZR turbo s fit on a 2015 RZR 900 trail?
@moorepowergarage62052 жыл бұрын
The doors will but the cage won't. The b Pilar is a different mounting style.
@mikegeorge93822 жыл бұрын
Awesome world needs more dads like that only problem I see is that the kids weren’t helping;)
@moorepowergarage62052 жыл бұрын
Yeah at this age they just run off with the smaller parts. I once found my lug nuts hidden in a sock drawer. Maybe in a few years they'll be more helpful.
@danielbrooks21462 жыл бұрын
I love it.
@curtiscordova82672 жыл бұрын
Would you then use a turbo s windsheild? To get rid of the gab between the top of the cage?
@moorepowergarage62052 жыл бұрын
You could but the turbo S has different hood plastics so you'd have two large gaps at the bottom.
@marquezdazae22 жыл бұрын
How about the Roof, Will a 2021 Xp4 Roof fit a Turbo S Cage?
@moorepowergarage62052 жыл бұрын
I've seen people drill new holes in the aluminum roofs to fit the turbo S cage but I've always just used a turbo S style roof. If you have the plastic roof however the two cages are just too different to make it work.