Do u know how many speakers total in the car I looked on the web some say 4 some say 6
@QuariiPittmanКүн бұрын
How much was the piece
@alfonsuswyatte-qx9ou4 күн бұрын
What’s up, brother? Do you think it will work for 76
@henrytauch838310 күн бұрын
i have a 2019 the inside look pretty much the same 😂😂😂
@OskeeWowWowIllinois2310 күн бұрын
Can a faulty coolant temp sensor cause my plastic coolant can to overflow and boil like crazy!?.. I just switched the thermostat and the fuses for cooling fan are fine.. My cooling fan has been coming off and on at the most random times.. so im just trying to self diagnose everything..
@anthony_t.v217912 күн бұрын
Is this the same as the oil temp sensor? I can’t find any info for this engine on it
@AsthmaticChristian13 күн бұрын
hey mr jones! what is that bright green plug thats below the harness @ 7:38? i noticed last time i looked in my engine that mine wasn’t plugged to anything.
@allenc.christy820115 күн бұрын
Great instruction video on this replacement. Thanks a million for taking the time to make this. I have a 2007 Sonata and this rear window regulator just failed for no reason. Could not replace it without this video. Thanks again
@imakebeatsxwillfrmda623016 күн бұрын
I finally got my 94 back running but my serpentine belt is starting to fray since I have to replace it should I replace all the moving parts while I have some in there like the tensioner, pulley etc . I was getting all acdelco parts
@BrandynMarcus16 күн бұрын
Appreciate this, very detailed and you took your time explaining which helped a lot, I’m gonna be changing out my sisters after a shop charged her almost $500
@explorer90916 күн бұрын
0:01 - " You got Mr. Law Jones here wita nigga video." 😆😂🤣😅😀
@hectik_filmz16 күн бұрын
That's what's up bro I'm getting ready to do this soon I have a little play in my steering. I've updated everything else but this here. Great video
@photog152924 күн бұрын
I have a '95 4WD Suburban and just installed a dash skin about two weeks ago. I'm also in DFW, and the heat does take its toll. My original dash wasn't in too bad of shape...large crack down the middle and the three screw mounts were also cracked and no longer held the dash in place. I first used window caulking to close the large crack stop the rattling, but it didn't look very good, and had one smaller crack along the lip of the dash. I first dry fitted the dash skin to check the fit, then removed it and applied the silicone RTV per the instructions...went in like a charm and really makes a difference in the look of the truck, plus no more vibrations and rattling. If someone is goi g to look at buying a dash skin,I'd recommend getting a second tube of the silicone RTV...I used almost both entire tubes. The only thing I had to 'fix' was to dremel a tiny bit off the dash skin where the fuse cover pops in...fuse cover kept popping off...made a little shave and all is good. Great product...highly recommend Dask Skin. The color match (tan) was perfect. Don't know about your screw mounts...mine just fit into place like the factory and the screws went right in.
@tapebetterthanglue966826 күн бұрын
What tools did you need exactly for the change. Never done an operation on my car myself and trying to keep cost sown
@happyhippo171027 күн бұрын
Did you buy an extended warranty from a 3rd party?
@MuzikLova6229 күн бұрын
Mr Jones just fell on your channel looking at the Caddy….love the content keep doing what your doing….looking to purchase a 98-99 Deville myself. Nervous bout the Northstar since I am not a mechanic. But KEEP DOING WHAT YOU DOING LOVE YOUR deVille bruh
@RozzallinBrown-ol7kd29 күн бұрын
Excellent work my friend!!!! From NE Alabama here & just bought my second one of these. Wouldn’t have NO other car. Your channel is greatly valued and appreciated. Thank you thank you thank you
@christianmaurer5978Ай бұрын
Thank you for providing the location of the center of the pump from the edge of the seam. That was just what I was looking to find.
@regmuhammad2772Ай бұрын
I’m looking forward to buying one
@brianwilliams3280Ай бұрын
Good evening I need to replace both of those also. But can't tell you the name, but this one is located on right side on the corner. Plus got to replace harness also cuz it burnt up against manifold exhaust. I have exact car, just 95 year. I really need to get with you cuz I have a few more questions
@BrettGlassАй бұрын
Ok I fixed the fast flashers., bad ground on the pigtail sockets. On the truck release I can hear the relay click when I press the release switch on both the remote and the switch on the dash. I also get 12 volts to the solenoid when I press them. So I need a new release solenoid. I can't find a new one listed anywhere.
@lawjo1978Ай бұрын
Hey Brett, Finding a new release solenoid isn't an easy find at all. You definitely go up to 99 model year for that part since it didn't change from 94-99 model years
@BrettGlassАй бұрын
@@lawjo1978 Yes I went back and read your notes on the video for the models and years that work, Thanks!
@denniekorpi5264Ай бұрын
Where did you get the hood liner?
@lawjo1978Ай бұрын
Hey Dennie, I'm sorry for the late reply. I got it from LMC Truck
@BrettGlassАй бұрын
Great Video, Hey Law I just picked up another 94 DeVille with only 20K this time. I'll send you a picture soon. The Truck release was not working, but I forgot about the lock out button, nice. I've got an issue with the right rear brake lights not working, and the flashers flashing fast too. Where to start...
@raymc206mc6Ай бұрын
Good video but Northstar is actually 275 HP, 4.9 is actually 300HP
@djbelic821Ай бұрын
Have too go with nappa if anything
@DiegoLopez-ii7veАй бұрын
Thanks you! Ive been having trouble to find that replacement! Can you share the replacement for the one that run from the alternator to battery & the starter to the battey? Thank a lot!
@kapkap23422 ай бұрын
2013 Lexus RX350, 62,278 miles
@portagepete12 ай бұрын
I would start before covering back up just to make sure nothing is leaking, but good video, thanks
@DavidHaile_profile2 ай бұрын
It doesn't appear to fit very well on the upper right side of the bezel. There's a gap. Is that temporary?
@poohfoster71202 ай бұрын
I just did thus on my 98 and it seems to be another cover over the pump is that normal? And should i cut that too?
@BrandonSalas-us8mm2 ай бұрын
My man Law l, What kind of relay is that ? Can i use any relay
@steverodriguez28982 ай бұрын
Will this work on a 92?
@tsn99132 ай бұрын
Thank you!
@corbydominowski81582 ай бұрын
What is the part number?You can't even see it
@greddmyles36772 ай бұрын
GMC is Sierra, Chevy is Silverado
@unknownpaidkillz18962 ай бұрын
I salute bro got a 99 suburban im doin the same 💯
@lovemeride2 ай бұрын
Do you work on Dodge challenger?
@lawjo19782 ай бұрын
Yes I do work on them. What issues are you having with your car?
@andrevann922 ай бұрын
Did changing the ocv solenoid fix the code p0011 and how much better did it run
@katrinafisher78202 ай бұрын
Have you had any issues? I am considering purchasing one exactly like that now…$60K miles, one owner, no accidents, well maintained (carfax).
@tage2022 ай бұрын
Great video. I have the same car and issue. Very helpful on getting started. The biggest challenge for me was removing the glass from the regulator. I ended up having to break the plastic holder. No way around it. I had to purchase a rivet gun to install some pieces that came with the panel. I also couldn’t save the speaker because it was also held in place with a rivet screw. The newer regulator doesn’t come with a screw to hold the glass. You basically snap it in and no screw and glue needed to hold it in place.
@stevhandingwall20282 ай бұрын
Mine is messed up too I can’t get it off because I can’t force the glass down to find the two 10 mm bolts to loosen
@LoveTravel-fv1jn2 ай бұрын
I am having same problem. Can't open beacause of window glass
@MrMetacomGaming2 ай бұрын
I just broke the plastic piece that held the window into it. I went to the hardware store and got some screws with wing nuts and locktite to put the speaker back in
@tage2022 ай бұрын
@@MrMetacomGaming good job. I tried drilling out the rivet screw but drill bit kept slipping.
@gjensen45853 ай бұрын
Great video and explanation. Unfortunately, the 3.6 l high feature engine is junk compared to the 3800 Series 3 which was discontinued.
@midnightstoker4_02 ай бұрын
I have the 3800
@redrumnph3 ай бұрын
So it’s a feed line a return line and what’s that one in the middle ? A vent ? I just took out my tank and idk whoever had it before me had a line going to that middle one I’m assuming I should take it off after seeing this video I have a 99 gmc k1500 suburban slt I had a rusty old tank that was leaking I replaced it today and now the leak is coming from the top
@MiguelTorres-qf8dt3 ай бұрын
Is the Lexus RX 350 F sport 2013-2015 with the 8 speed transmission reliable too or only the 6 speed?
@Whosyourdaddy-ty2xe3 ай бұрын
I’m about to go outside to replace mine and a couple of ignition coils
@rickdaruler3333 ай бұрын
How do you test the fuel pump I'm on the side of the road right now
@SadlyANorthstarFan3 ай бұрын
Great vid bud 👍
@anthonywilliams41003 ай бұрын
Law, what issues did you have getting your gauges to read in your LS swap.
@SearchingForPurpose3 ай бұрын
How hard was it to get that throttle body off? I tried taking my TPS sensor off an one the the torx bolts broke off so now i have to take the whole throttle body off to drill the broke bolt out 🙄
@wellibee3 ай бұрын
Thanks for the video! Same problem on my 1996 Chevy Silverado. Just ordered this part!