I would love to represent EGON in the USA. Currently driving a Storyteller Sprinter Van. 35 years in Electrical System Sales. I have been watching you and Andrew for the last few years. I would love to explore the opportunity. Looking forward to hearing from you. Cheers. Chris Yetter South Carolina USA

Where is the particle filter on the pump?

I have one in my Y62. Great product.

I definitely need this in my setup! 😊 If you need a distributor and an affiliate in Norway let me know! 😉 Best, Simon 🇳🇴

Awesome and outstanding.

Yep, I approve of these products.......because I use it!

Would the 80amp connection come through the cranking battery or house battery?

Don’t know about mine vehicles…. But 100% recommend these for regular 4wd 12v setups…. Looks great, easy to wire up, they just work….

With due respect, Bonetti Campers have been selling the hot water system for years and its a lot simpler that egon. In simple terms, this system has been out there for years. In plumbing terms, it;s a simple mixing valve that I had for at least as long as possibly 20 years. I like the idea with egon, but too complicated and too expensive.

Sorry I can’t hear you clearly over the noise or is it music..

Highly recommend Heiner and the Team at Egon. Love the expertise and ability to talk to someone when planning the builds to ensure the correct products are purchased and used effectively.

I mean the Tigerexped central electrics TEXU400 / TEXU200 are quite similar, but require crimping...

I want to buy one of these for an upcoming 12v build in an overlanding 4wd as i like spending money on gadgets but i still cannot see the justification for $700?! I don’t think it’s worth that to not have to crimp and heatshrink and to remove the need of seperate component(fuseblock etc). It does look like it would simplify the solution for newcomers(should they really be installing a system in the first place) or someone that installs them on the daily and the client is pying for the egon. My question is, is this hub worth buying for someone that can design and install a 12v system and why? Fuseblocks have diagnostic leds so what else would i be gaining?? Sorry for the negativity but maybe ita not for me?

Hi Guys, Was wondering if you had any issues with popping the uln2003 chip....Unless the schematic is incorrect or your using relays with built in "back emf" diodes across the coils you may issues....

For those playing along at home the correct terminology are... Potable/Drinking water, which has been Filtered, Decontaminated, Processed, and made safe for consumption. Rain Water used to be Drinkable as Untreated Water, but there are too many once airborne contaminants that have found their way into the rain water collection and storage systems. Apparently... Is bird and bat poo classed as once airborne contaminants? lol. And Non-Potable/ Undrinkable/Raw/Untreated Water such as the Rain Water, and Creek or Dam Water that you don't know they quality of. Quite often it is safe for everything except consumption unless boiled above 85degC at sea level. Grey water is Waste Water that is not Sewerage, generated from Baths, Showers, Wash Basins, and Laundries. You don't want to be using Grey Water for showering due to the potential Biological Contaminants. Part of that list can be E-Coli, Giardia, Salmonella, Campylobacter, etc, which can cause digestion issues, and there are others that can cause skin issues. Black Water is Sewerage Waste Water, and you don't want to shower in that either. lol.

The Egon Water Hub is a brilliant bit of kit, well done

Can the dirt / aux water source be pressurised coming into the water hub at all? My scenario would be using a secondary pump to draw water from a river possibly 20m away, I'm assuming the 3.5lpm pump on the aux circuit would not be able to pull water from a river for example? Or can city water be connected as the aux source? A very impressive solution in such a small package.

This thing is awesome, but I don't understand how huge fat DC cables can suddenly run through a tiny circuit board and not be a problem?

the logo looks like a flux capacitor. ( Back to the Future)

Heiner and Andrew, I love this Egon Relay-hub, however what's with the light/load getting some power (@1:59) before the associated Fuse is plugged in? Seems like some sort of voltage leak in the circuit? My guess is it's leaking through via the LED or the resistor?

Awesome product will be implementing in my build. 2 questions: 1) @:1.23 : how many switches can i daisy chain for the power output for switch input (i.e poistive and ground cable from board powering the switches) i have a few switches right next to eachother which need power 2) how do you recommend running two seperate 12v power inputs into different located switches FROM THE BOARD - i.e. two sets of cables to switches - for example switch in the front of the cab and switch in the back of the cab 3) Located in perth - is it best to source from p2p or is there a cheaper option ? Many thabks great video

I cannot stand this bloke! The way he talks and over animates! Then there is has condescending manner! Andrew, not Heiner!

Thank you so much for sharing your knowledge with us, it really does help us heaps to understand how things work & gives us more confidence in your product. It's not just snake oil , smoke & mirrors IT'S THE REAL DEAL, HONEST, OZZY PROOF, TUFF STUFF👍🙂

Will there be plans to support 48v switching? I see 48 volt being used more and more in off-grid situations.

Just discovered you guys, absolutely love what you do!

Instead of screwing the wire, why not use a WAGO type of connectors for easy use/connection. Just a suggestion.

Hey, where is that utility panel from please? The one where you connect the shower hose.

I love your product, I reckon these demos need to have components screwed down in a realistic scenario. Even if it is a board with the outline drawing of a vehicle on it with the field components represented in someway. It doesn’t have to be to scale.

Yes good but be aware that Ford releys look the same as GM / Euro style releys but the pin configuration is different (AUS Falcon type)

ভালো😊😊😊

Very well explained video. Thanks

Are you shipping to the US?

Ahhh yes the secret from the canopy video. Awesome work

All in one ☝️ I think will be great slogan

Nice destructive video.

So neat and clean. I’m definitely buying this.

Excellent guys.

Dear Haymer, In the clip for connections you state unregulated solar connect to P9. Surely it must be regulated ?

Could you please do a similar quick video for Victron DC DC and Victron MPPT Solar Charger? A lot of people are using that setup!

While I am sure that the quality of this product is quite high, so is the price = nearly $2000.00 for a water system? A rich man's luxury - and good luck to them.

Awesome and outstanding

I cant be the only one looking at that water dripping out of the shower in the background hoping Andrew would turn it off properly!

Absolute game changer for overland vehicles 👏👏👏

I need this in my setup 👌🏼👌🏼👌🏼💚💚💚

I would be interested in yhe waterproof version because it would be installed in a pickup bed

Hi guys, great product. Can you tell me or give me a link for where you got the mixing valve? Cheers

Is it possible to use it with a hydronic heater ? Through a heat exchanger instead of a boiler? Thanks

Where does the DC Hub sit? Under the bonnet or in the passenger cabin?

This video is brilliant! What a great way to show what it does. Thank you for your innovative pursuits, your products are a great value.

Will there be a video on the switching:relay hub?