It is the best. I’ve had mine since 2005 and just received it back from being reconditioned.
@alpaslanay787610 ай бұрын
Thank you for posting 🙏
@Shilo-fc3xm Жыл бұрын
Hello. I have searched hi and low for factory reset instructions including official manual. Anyone? Thanks.
@dnhjrhop Жыл бұрын
The only way to "reset" is to shut off & on the rear power switch, which boots it. Then, the top switch powers it up and after heating, you do the rinse it asks for which positions the infuser ready to brew. If some or none of this happens, there's an electrical or mechanical malfunction that will need fixing.
@Shilo-fc3xm Жыл бұрын
Thank you,@@dnhjrhop, appreciated.
@margaretcarmichael5234 Жыл бұрын
Excellent instruction 🤩
@radams009 Жыл бұрын
16 YEARS AND WOW I DID NOT KNOW ALL OF THIS. Thanks for showing me about my S9
@LKOO72 жыл бұрын
I felt like a boomer not being able to operate this. Thx
@michaelschneider-2 жыл бұрын
Super DIY resource!! Hey that’s our Impressa S9 Avantgarde machine. It’s a powerhouse! Thanks for the details..
@kdramaqqq2102 жыл бұрын
I can tell you, as a coffee lover, the JURA is by far the most reliable. I have had the J5 model for almost 13 years and it has never broken down once, never failed, never. I had a Krups and that one was always getting repaired. Jura is the way to go.
@peju27892 жыл бұрын
i dont have that kind of option in my C9? Did they released different models? On the left side dont have power button, but have there three coffee icons: small, medium, large. on the right side i dont have any switch to block milk. i have there rotary regulation and the choice between big and small coffee.
@ebayarbitrage2 жыл бұрын
Do you have the European 240 volt model? That may be why. Also, check the bar code - does it say C9 One-Touch?
@nodinodi1652 жыл бұрын
Szkoda, że nie ma polskich napisów. 😭
@wolfgangbernecker3563 Жыл бұрын
In deutsch
@lidiavasile72153 жыл бұрын
Where can I buy the milk container? I received the machine from a friend with out the book.
@superautopro3 жыл бұрын
Just search "jura milk container" on eBay or Amazon. You'll find stainless and glass ones.
@supportpacketsky32383 жыл бұрын
Hi I have an issue with my z5 sure it's just a setting but when I press my one-touch cappuccino button the milk comes out the left spout but then the coffee comes out of the normal coffee spouts and not the left spout any advise
@donalfalvey1452 жыл бұрын
Hi, I had this too. I think it probably needs a service. There is a valve that directs the coffee from the brew unit to the outlet. This valve is faulty. Mine does this occasionally so I place a cup under both. in the UK Jura have a fixed price for a service. They replace whatever is need and give 6 months warranty
@Alek_sej3 жыл бұрын
How to descale it?
@czonczike6303 жыл бұрын
4:04 Narrator: Set it to the ON position. On screen: *turns machine off*
@superautopro3 жыл бұрын
Very Sharp Eye! -=on, 0=off and they pressed 0. Guess the video editor missed that.
@ilonawojcieszak84473 жыл бұрын
Czy ktoś wie co zrobić jak piszę system fullen?
@Roqfort2 жыл бұрын
Z tego, co znalazłem - "Oznacza on, że trzeba sprawdzić szczelność systemu cyrkulacji wody. Aby pozbyć się usterki, należy wyczyścić przepływomierz."
@bangsseter87413 жыл бұрын
Hi the F9 juro machine says clean machine but don’t know how to clean it.. I was waiting for your video to demonstrate the cleaning part but there’s none.
@superautopro3 жыл бұрын
That requires special cleaning tablets to drop in and it's automated. It's not in the video but in the Manual. If no manual, just search "jura tablet cleaning" and you'll find what to do.
@joemiller41303 жыл бұрын
love this machine. even today after 12 years, it works perfect due to the maintenance every year.
@mariang72773 жыл бұрын
what do you do for maintenance?
@krzysztofupinski85153 жыл бұрын
Very good Jura J5 review . J6 seems the same just color difference (piano black) .
@hermantoherman4433 жыл бұрын
Bahasa indonesia mana
@jpm37953 жыл бұрын
Best machine I ever used, every 2 years I take apart and clean the grinder. You can send it for service. I had this machine for years and never disappoint me. Use medium roast as dark roast is too oily. Don't leave it on if you don't used hourly.
@imohbalu2 жыл бұрын
Hi dear can you worm up milk and fill the espresso cups at same time
@Platoface3 жыл бұрын
This looks old....
@erasmonodalmartin29553 жыл бұрын
Muy buena cafetera
@takanutka62133 жыл бұрын
Pieknie zaprezentowane. Szukam takiej instrukcji po polsku.
@lenie.kreide43503 жыл бұрын
12:40 making drinks with milk
@lilianamadalinapetrescu56284 жыл бұрын
How clean jura impressa z5
@superautopro4 жыл бұрын
As clean as possible - Like Brand New!
@angeliou424 жыл бұрын
Ok, but how do you descale the machine with the 3 tablets?
@superautopro4 жыл бұрын
1. Turn the F9 off and let cool down for one hour. Push and hold the RINSE button until display shows EMPTY TRAY. 2. Remove and empty tray. You must remove the tray for 20 seconds even if it is empty. Replace tray. 3. AGENT IN TANK / PRESS MAINT. Dissolve three large square tablets in 16 oz. of water and pour mixture into water tank. Place a container (at least 16 oz.) under frother. 4. Push the RINSE button. MACHINE DESCALED. After a few minutes: EMPTY TRAY. Carefully remove cup and tray, empty and replace. 5. FILL WATER. Rinse water tank and fill with cold water (16 oz.) and replace. Place a container under the frother. 6. PRESS MAINT. FILL WATER. Push the RINSE button. MACHINE DESCALED. After a few minutes: EMPTY TRAY. Carefully remove cup and tray, empty and replace. 7. PRESS MAINT. Push the RINSE button. The F9 returns to SELECT PRODUCT and resets itself.
@sieraspasienietis1630 Жыл бұрын
Maybe there is a video on how to do it?
@tonyblackops4 жыл бұрын
Never beats Breville dual boiler
@superautopro4 жыл бұрын
That's a different league - the J5 is a single boiler.
@zulfafetah94612 жыл бұрын
Hi SR pls can you help me my jura J5 its not warking
@saborguerito4 жыл бұрын
"Cafe mocha late" is like saying "coke sprite" they are two different beverages!
@julieparsons97704 жыл бұрын
What is up with mine it's got no pressure can anyone help
@superautopro4 жыл бұрын
Use the Contact Form at SuperautoPro.com and give as much detail as you can - we'll help you out.
@julieparsons97704 жыл бұрын
How do I get sevice
@Batlca4 жыл бұрын
Why isn't the machine pumping water? It doesn't even rinse
@superautopro4 жыл бұрын
Go to superautopro.com, hit Contact, give as much detail as you can, we'll help you out.
@mienkkieplacuszkitv13974 жыл бұрын
xd
@rachellejauvin28944 жыл бұрын
Wwqfrancais
@danavincent11314 жыл бұрын
Very helpful.
@SelRiouS4 жыл бұрын
Intro: 0:00 First Time Initial Set Up: 3:05 Daily Initial Preparation: 5:22 Brewing Coffee: 6:05 Frothing Milk: 8:25 - Cappuccino: 9:19 frothXpress PLUS: 10:28 - Cappuccino & Latte macchiato at the same time: 12:08 - Hot chocolate: 13:40 Cleaning the frothXpress PLUS and the Dual Frother PLUS: 14:27 Adjusting the Grinder: 15:56 Using Pre-Ground Coffee: 16:23 Using the Hot Water Spout: 17:05 Programmable Functions: 18:02 Programming Your S9 Avantgarde: 21:26 Clearyl Water Care System: 24:28 Monitoring: 26:20
@PaesJAO4 жыл бұрын
Bought this machine off of someone and didn’t have the manual. Thank you guys for the video. Now I can make some great coffee
@keto4life1972 жыл бұрын
Probably fine back then
@mlradcliffe39555 жыл бұрын
I love my Jura, mydaughter gave it tome when she upgraded
@dnhjrhop5 жыл бұрын
Are you using the built-in grinder or the pre-ground bypass? Contact me at www.superautopro.com/crm.asp?action=contactus and we'll fix you up.
@yskwong5 жыл бұрын
How do I know how many grams of beans are ground every time I press the espresso button? How do I ensure brew time 23-28 seconds? Since I don't know the input of beans, how do I control the output? How do I calibrate in such a way that I get 1:1.5 or 1:2 ratio?
@superautopro5 жыл бұрын
You cannot program a specific weight of grind or volume of water. For water, you start a brew and tell it when to stop and it repeats that volume until you change it again. For grind, you have 5 to 9 seconds of spin to pick depending on your choice of Mild, Regular, or Strong, and Aroma (regular or strong), and cup size. These times are fixed. From those parameters, you can dial in your ratios.
@rachellejauvin55264 жыл бұрын
Français
@manivill75 жыл бұрын
Yes I bought a refurbished 220v J5 issued 2010 and it’s working fine ever since. Never use dark roast or flavoured coffee beans. Despite its dinosaur model, it delivers because it used to be flagship model. Subsequent models have so many bangs & whistles. A super automatic coffee machine is enough. I believe Jura brand is the Mercedes Benz of coffee machines in mid 2000.
@superautopro5 жыл бұрын
You got that right! Never mess with an Original!
@Phewy4 жыл бұрын
We go ours in the same time frame, 110v version. Never a problem until it recently went to the coffee farm in the sky. You don't know what you have until you don't!
@thecollegepicker5 жыл бұрын
What did this retail for new? Thanks 👍😎
@superautopro5 жыл бұрын
About $2500 ($3026 in 2019 dollars)
@kevinking73335 жыл бұрын
I have a Jura Impressa S8. Coffee and tea spout have worked constantly. I removed a hose from the steamer to unclog cuz my steam wand was not producing anything. After putting it back together, steam wand worked perfectly. When I went to de calcify, added the tablet and pushed the clean button, the entire process went through the steam wand! I reset to factory settings, re booted, and when I push rinse it again all goes through the steam wand. After "Coffee Ready" I pushed the coffee brew and the grinder activated but the water again came out the steam wand. My understanding is that if I leave it unplugged for 2 hours, the CPU will clear. Then I should get the "fill system" prompt. Right now I am only getting will water. If after the 2 hour wait is still does not channel the water to the coffee spout, I assume it is the fault of the water channeler that is behind the steam knob which has two line in's and 2 line outs. Before I did the repair and cleaning the coffee and tea spouts were functioning perfectly. Advice?
@superautopro5 жыл бұрын
Two things - 1. Decalcify and Clean are two separate processes. Decalcify uses the tablet dissolved in the water tank and pushes water out the steam pipe during the first half of the cycle. Tablet cleaning uses the tablet in the ground coffee chute and passes no water out the steam pipe. 2. There's a magnetic solenoid valve that stays closed during rinse/brew to keep anything from coming out the steam pipe. If the solenoid is stuck open or there's debris in it, everything will come out that pipe and not through the dual coffee spouts (which sounds like your probelm here). This has nothing to do with the Reset, CPU, nor what's behind the hot water knob. Fortunately, the solenoid comes apart so you can fix it.
@dianebarbara59224 жыл бұрын
@@superautopro We have the impressa S8 probablie 10/12 years old and it won't rinse I can't figure out why.
@superautopro4 жыл бұрын
@@dianebarbara5922 Hi Diane - Does it do everything else like make coffee, steam? When you rinse can you hear the pump? Need more detail.
@ArnaudSiemons6 жыл бұрын
This video is very informative and helpful. Thank you for posting.
@JUSTENization6 жыл бұрын
It's unbelievable that after almost 20 years, there's this review and instructions of this F7. We bought our F7 when it was first available in the USA and it has been serving us all these years (it's been sent in for service & maintenance twice) and as of today it is still running every morning making coffees for us before we set out to work, and also in the evenings and weekends whenever we needed a cup of coffee. Although we are getting ready to retire it and replacing it with another great machine, also made by Jura. At this age it still stands handsomely on the kitchen counter top with many admiring eyes when there are visitors visiting. Great job Jura!
@jdashlovela5 жыл бұрын
how old is the f7... someone is selling it for 550 online is that too much
@superautopro5 жыл бұрын
Yes, they hit a home run on this one!
@superautopro5 жыл бұрын
They were made in the mid 2000's. 550 is too low for this - was a being sold for parts?
@davidsamara48616 жыл бұрын
Great,easy to understand video helped me to finally start using this machine that I bought for almost nothing at an estate sale.I was a bit intimidated by all the settings so it sat for quite a long time. The manual can be downloaded as a PDF from ManualsLib but this video was clarifying especially for the issue of making decaf with preground coffee in the preground hopper.