The terrible voiceover makes it unbearable to watch...
@vancouverite803 күн бұрын
Terrible explanation
@mabelnavas93423 күн бұрын
Hi, i have a 3 mesh devices from dlink EAGLE PRO AI M15. help!! by the way the 3 devices have ports internet and ethernet. Can you help me to install a wired mesh : 1.From My ISP Router i plug a cable in the m15 port internet. 2. in the second m15 i plug the cable into the ethernet port 3. in the thirt device m15 i plug the cable coming from the 2con device into the ethernet cable. and so on? please help me... thanks alot
@GlendaPittard5 күн бұрын
Thank you
@fragrancememoir23505 күн бұрын
So how do you fix things after you've allowed them remote access to your computer/connection? 😩
@dawnwingsnecrozma8536 күн бұрын
What do I do if it’s just a solid red light?
@cecilelamborot38516 күн бұрын
Thank you so much!! I could finally setup my extender. Typing the ip address on a phone with data disabled did the trick!
@buzzerd486 күн бұрын
Flashing Blue for 5 min and no progress from there
@titanmxatv6 күн бұрын
Doesn't work just says not active the links dont work on the other comment's ethier really annoying as i need to put a password on my extender but can't access the wavlink admin portal been trying for days had enough now just want to smash it up
@Nobunagawa9 күн бұрын
Thank you! I can't believe that they don't even show you in the manual where the hidden button is...
@mohammadimami45079 күн бұрын
Thanks
@deborahlewis96710 күн бұрын
Thank You !!
@Mazza66611 күн бұрын
Use the nighthawk app to pair extender if you're unsuccessfully using manual/wps method
@Mazza66611 күн бұрын
Use the nighthawk app to pair extender if you're unsuccessfully using manual/wps method. I was unsuccessful with both these methods
@Mystic.Legend.12 күн бұрын
Great explanation! 🙌 if I do the double combo router/modem I have with a 3 pack Eero mesh, is it essential requirement to put my existing combo router into bridge mode? If so does that mean the security settings on that existing combo router carries over to the eero’s or what would happen with my existing security settings in my existing combo router? I heard that the eero’s security settings are behind a paywall and not sure what sort of security is even on the eero’s. Hope you can advise, thank you.
@devicessetup11 күн бұрын
@@Mystic.Legend. •Yes, it is typically essential to put your existing combo router/modem into bridge mode when using an Eero mesh system to avoid network conflicts. Security settings from your combo router/modem do not directly carry over to Eero once it is in bridge mode; Eero manages its own security settings. Eero provides basic security features for free, with more advanced features available through their Eero Secure subscription. Before setting up your Eero system, it's a good idea to review the specific security features included and decide if you want to opt for additional features through the subscription service based on your security needs and preferences. Hope it helps!
@Mystic.Legend.11 күн бұрын
@@devicessetup thanks for the information. But I assume I could just plug the Eero directly into my existing combo modem/router and just set it up without having to either do bridge mode or double natting right? It would just route wifi traffic from the existing router?
@EvokedRose12 күн бұрын
The only option that worked for me was the browser on my phone. Thank you 🙏
@devicessetup11 күн бұрын
@@EvokedRose your welcome 👍
@isaiasmtmjr12 күн бұрын
Loved the video and various ways to connect. Very user friendly process as described by you. A+++++
@devicessetup11 күн бұрын
@@isaiasmtmjr Happy to help, do kindly like and subscribe to support my efforts 🙏
@CherylBepis13 күн бұрын
You helped me when I thought I was losing my mind - thank you and God bless you
@devicessetup11 күн бұрын
@@CherylBepis Thank you so much for your kind words, just a small request plz do like and subscribe as it will help in my small channel growth 🙏
@Efreezy2915 күн бұрын
Does the router and modem need to be connected with an ethernet cable?
@devicessetup14 күн бұрын
@@Efreezy29 yes
@sunshinehwy15 күн бұрын
I want to wirelessly connect to existing Router then hardwire Ethernet devices to the Night hawk, should that work?
@devicessetup14 күн бұрын
@@sunshinehwy yes it will
@sunshinehwy14 күн бұрын
@@devicessetup Thxxx
@mik199815 күн бұрын
Is RE215 can be extended using lan cable?
@hotrod306116 күн бұрын
signology...we shoulda never gave you people internet
@jeffcarlson938417 күн бұрын
How do I turn off the white LED light ? thanks
@76TomD19 күн бұрын
it will tell you it is up to date even when it is not. I have two identical units. Both were on an old version and only yet only one said it needed to be updated. The 2nd unit responds 'this unit is up to date'.
@jijoofanchal20 күн бұрын
Hi
@cyrixthedoll20 күн бұрын
Thank you!
@TerryB75121 күн бұрын
I wish the camera would allow battery recharging while the camera is still online. The app never seems to show an increase in the battery level while it is online and plugged in to charge. I always have to turn the camera completely off and then charge the battery. Then go through the whole sequence of bringing the camera online again.
@rogojangigel329423 күн бұрын
Hello,..I have a question, when I turn it on, the green light from "POE CONVERTER" blinks and does not work......Thank you
@niteshk320923 күн бұрын
Simple and to the point , thanks
@batmane73024 күн бұрын
I did the nighthawk app method but it didn’t seem to improve and or extend my wifi at all
@devicessetup11 күн бұрын
@@batmane730 maybe try changing the channels on the router or try upgrading ur wifi plan
@arunjain26525 күн бұрын
Site not open
@jsanchezparra8526 күн бұрын
Hello there, thanks for the video. One question: how can i choose just to vacuum or just to mop
@AdityaBhosale-n7q27 күн бұрын
tell me microscan username and password
@joergenandersson392227 күн бұрын
very very bad extender and setup. if you use a phone on the wifi it will NOT automatic change to the stronger extender if it still have just a little signal from the first extender... my advise is, delete this video, this is so so wrong
@pissedoffpuppy28 күн бұрын
Are you able to keep the starlink wifi active and add the home router hardwired to the GEN 3 unit and then add a separate home wifi to the home router?
@rain7096Ай бұрын
👍
@VishalYadav-wn8gcАй бұрын
Hello sir after linking my Tapo to alexa it says Sorry it is not supported what should i do?
@FRw1K92Ай бұрын
Are the antennas removable?
@thinkbhavanaАй бұрын
Thank you for your video. Can you disable the camera from the app. In other words, if I do not wish the camera to record for a period of time, can I disable it remotely without having to climb up and disable it manually? Thank you for your time.
@PNWDADDYАй бұрын
Great video !!🎉
@PNWDADDYАй бұрын
Help with the battery pro 2k iv Tried all the steps but the disconnect in the modem and router would that really work and what does that do should I try it
@oddexplorer7976Ай бұрын
But my wifi router doesn't have internet yet so how can i do configuration?
@devicessetupАй бұрын
Connect ethernet cable from modem to the router's wan port if u have modem. In case you have internet cable directly coming from ISP then plug it directly into the routers wan port. Next connect another ethernet cable from routers lan port to your computer then access this ip address on ur computer to start ur router setup.
@dustinwhite6885Ай бұрын
Thank you.
@themightythor1974Ай бұрын
The only that worked was the ip address, thank you for the great tutorial. It was extremely helpful.
@davidbrisbane7206Ай бұрын
Thanks. This advice worked for me and yes, I came across the scammers and avoided them!
@devicessetupАй бұрын
Happy to help, do kindly support my efforts my like and subscribe
@davidbrisbane7206Ай бұрын
@@devicessetup Done!
@EthanConner-jj6mgАй бұрын
Thank you so much this huid was way bette Ethan the original one
@devicessetupАй бұрын
Really happy to help, do support my small channel my like and subscribe
@christiancordy639Ай бұрын
Do you know how to change it to a different WiFi after you've already set it up to a different one?
@devicessetupАй бұрын
Simply reset the extender, by pressing the reset button on it using a pin or paper clip for around 10 seconds while the ext is plugged in to a power source, and after 10 secs let the ext reboot. AND THEN set it up again.
@icrooCZАй бұрын
I tried but it said site not reached
@devicessetupАй бұрын
Make sure your laptop is connected to your routers ssid or is connected via ethernet cable to your router while u try to login into it.
@Z555xАй бұрын
Please help, whenever i manually enter the website it says it could not be reached or it didnt connect. And the other websites did not work
@devicessetupАй бұрын
By website do you mean "mywifiext.net" or any random website or url?