This video helped me out. Although it did not show me a stack up diagram the video still helped me. I have never done this before but I am happy to say that the heli is running smoothly now. The close up focus sometimes was blurry. A light color 1 color mat background would be easier to see the parts. Thanks for the video.

the drift angle was bit off, then boom it's time reversal! You got me!!

awesome track, where can i find it?

Better than stock diff?

What motor is that your running

i hope you are ok. should get those shaky hands checked out. theres a reason for tremors

What size Philips screw driver did you use / recommend for this repair?

Do you have a list of parts and how much everything costs?

Thanks for sharing… I expected the DriftArt 4 would come stock with all the DS3 aluminum upgrades l like the moonwalk, rear adjustable arms and such.

No matter how hard I try, I can never get that swash guide to snap into the notch. I tried to remove the boom and place it in, then as soon as I insert the boom, it pops out.I just learned to live with the gap. Thing still flies awesome.

Great vid. Ironically I was trying to trouble shoot my helo. Kept pulling to one side. I just searched changing shafts for the Goosky and yours came up. I thought it was the main rotor shaft but I turned the feather shaft the way you showed and voila...it was the culprit. Thank you.

Thank you

Thank you, just what I wanted to see. The size difference between the S1 and S2.

Lol we didn't know better , back then. Now they look so okky , giraffe looking stance & all. I have them & now Blades Helis feel like 20th Century junk.

I have the pink s1 and love it,the best micro heli on the market,now I have to get the s2 and s4.

Looks like the perfect size,

F..k CANT SEE ANYTHING GEEZZ

Tks 4 the Video .

An XK , Blade Flyer & my new Goosky S-1 makes the rest i own feel , look & perform flimsy.

Thanks.Just broke mine yesterday,so this will be very helpful when my parts arrive.

Good vid, where is the one on changing the main shaft? <;-)

hello sir . i am ready to fly helis again as you know i liked the 130x . i am looking at the RTF S1. thank you

Thank you for the video🤪

Hello , I also have this Heli . For some reason the Swash Plate will not raise when I throttle up to collective pitch. everything else works fine . Throttle , Rudder , Elevator and Aileron . The Swash Plate will raise if I push the Panic /Bind button . I am using the DXs transmitter that came with it . Thanks . love your video's

Hello , I also have this Heli . For some reason the Swash Plate will not raise when I throttle up to collective pitch. everything else works fine . Throttle , Rudder , Elevator and Aileron . The Swash Plate will raise if I push the Panic /Bind button . I am using the DXs transmitter that came with it . Thanks . love your video's

Help Please . Collective pitch is not working . Throttle works and so does Rudder on left stick . Right gimbal is fine. Elevator and ailerons move fine . Please help . I'm using the DXs transmitter that came it came with .

Help Please . Collective pitch is not working . Throttle works and so does Rudder on left stick . Right gimbal is fine. Elevator and ailerons move fine . Please help .

Does it matter what way the gyro is facing??

Whats your tip to tip distance with the right pitch setting on the S2?

I need to do mine too. A couple of things occurred to me looking at it. 1st you could probably take the broken bit of the boom out and just put the boom back in, OK it would be a few mm shorter, but still...Obviously I'm not being too serious here, as with the shorter boom it probably wouldn't fly right, and the tail rotor may end up hitting the main blades. Thew other thing that occurred to me, was whether it was necessary to unplug the tail motor from the flight computer, would it be possible to disconnect the tail motor at the tail end, like is it soldered?

Tyty

Is the 3 blade any different setup?

I writing this in 2024 and I appreciate this video tutorial .I've just bought a Blade 230 V2.

Thanks man. Made some triple X recordings from my wife that the guys at the field are going to absolutely lose it. 😆

I have an NX8 Tx and cannot get tx into servo setup mode. Servos don't respond. Can you please help me?

Still helping in 2024!

This is my first heli and this video helped. Starting to venture out or safe mode and boom right into a disk golf goal thing-ma-jig. Parts are in route, thanks for the help!

What tools do I need to repair this heli?

Very helpful tutorial thanks .

Very very helpful video, thanks

well done...great flying

thats such a cutie little thing.....i see you even put it out of track which is a brain tease for me as to why, except to force the front end to slide. I guess when u r a 3D expert in heli this baby is easy enough skill level to operate.

Now out of date, do one on the App.

I have been trying to find a lap time comparison between a traxxas tqi radio vs a higher quality radio. Both installed in the same car and I cant find this comparison anywhere on KZbin

Hello, and thanks for the video. I was wondering if my links are at the right length according to the manual should I have to turn them anyway to set zero pitch? Also I can use programming to set pitch on my M2. Would I be able to just use the transmitter or would I have to turn the links also? Also, I noticed I seem to have zero pitch at mid stick when I’m in idle up but not normal mode. Is this normal? Finally, my bird flies perfectly level even though I don’t have zero pitch at mid stick one in normal mode. I guess there is a difference between the swash being perfectly level and zero pitch. Am I mistaken to assume that zero pitch is most important for inverted flying and the like, hence, is that why I have close to zero pitch in idle up and what are the ramifications for not having zero pitch since the hell he seems to fly perfect. I realize I’m asking a lot of questions, but any help would be appreciated.

Outstanding step by step feathering shaft replacement! Thank you, sir!

Thank you for this video. Greatly appreciated.

What size wooden blocks did you use for your helicopter look like a 1 inch block of wood rot and back turned out nice I’m gonna build one

Just a side note if your going to do this mod, you dont have to remove anything from the fbl, just loosen the boom off, and snip the wires. Then solder on your servo connectors.

I have a "pre smart" 230s v2..it needs a reciever..can i update to a smart reciever and esc and retain original motors and servos??? Im using an nx8 radio