JC Ryan

Пікірлер

@marksmith1003 10 ай бұрын

Great video! Thank you so much!

@faarinsh Жыл бұрын

Great video. Thank you! I have bmw F11 2011 and this video was useful for installing roof rails for my car. Basic tips are the same.

@patrizio569 2 жыл бұрын

Thanks a lot. Very helpfull😉

@Surfgarage760 2 жыл бұрын

i have an e70 x5 2010 that needs roof rails. same process? i think with some bmw's the nut is welded onto the underside of the sheet metal and you just need to drill it out

@tilelliidhourar2626 2 жыл бұрын

Hi, thanks for this video, But you didn't show the most important..! I was waiting to see the and of the video how did you fix the rails.. 🤔 ? How did you fix this rails..??? You showed only how you removed all the parts .....!

@cardenas333 3 жыл бұрын

I dont mind the work, but if i mess up the airbags while installing the rails.....

@JayWelchy 3 жыл бұрын

THIS is the kind of detailed video we need! Thank you for taking the time to show the details, clips, how to undo etc, etc!! Well done sir

@kunchofbunts3613 3 жыл бұрын

Excellent well made video 👍🏻 cheers

@andrewscharalampou4517 3 жыл бұрын

You are super helpful thanks

@robertnalesnik9471 3 жыл бұрын

Very helpful, thank you! Note that I did not need to remove the front airbag support to get to the rail bolt, I carefully bent it out of the way.

@happymusic7278 3 жыл бұрын

Good

@lancebrown8823 4 жыл бұрын

Way too much work.

@johnsweda2999 4 жыл бұрын

What a load of nonsense

@CoquiAudio 3 жыл бұрын

This channel has no videos. uhmm

@Dongurwinder 4 жыл бұрын

Thanks Mr. Kit Ryan. this was great video for me to learn how to install factory OEM roof rails. Very clear instructions and tips.......awesome work....thanks!

@Jubukio 4 жыл бұрын

What are the other two boards that weren't replaced?

@annetteholland4538 5 жыл бұрын

Thank you so much for this video! We had to replace the sunroof and watching your video was very helpful!

@mesaboogie2286 5 жыл бұрын

You are great,thank you so much!!

@FarmassR6 5 жыл бұрын

Did you upgrade from the roller chain because you found it not accurate enough?

@shelby50411 5 жыл бұрын

Is there only 1 y small,motor moving huge gantry along y axis?If so thats not a good design

@ceejaydeesoozaa 5 жыл бұрын

wished the mm phono cards for the nac72 are cheaper

@dorianjames9798 6 жыл бұрын

You saved us! Where do I send you 5 bucks for a beer?

@terry2346 6 жыл бұрын

Great info Guess I am sending off for some more bearings! :)

@terry2346 6 жыл бұрын

Great information! I am just now making my own wood CNC based on the Blacktoe and this is really helpful information! Thanks a bunch!

@garykfko 6 жыл бұрын

Thank you very much this video. I am changing out my silver roof rails to gloss black and your video is very helpful! Thanks!

@PavelSalkevich 6 жыл бұрын

Hi!) Can you tell me plz, do i need to remove little plastick brackets to install rails or not?

@shelby50411 6 жыл бұрын

And wood is not waterproof

@shelby50411 6 жыл бұрын

The wood structure may be as strong as 1/4 aluminum but its about 1/50th the cost and as we all know wood moves substantially with temp and humidity....thats a poor cheap made machine and cost is ridiculous high....

@shelby50411 6 жыл бұрын

That deflection is bad and unacceptable

@shelby50411 6 жыл бұрын

Hi..im looking at a used 2x4 black toe cnc for $1500....is that a fair price and is it actually made of cheap mdf?

@gatojurko1 6 жыл бұрын

Why you took off whole headliner...

@fromkrypton1980 6 жыл бұрын

Great video! I want to do this on my X5 which is essentially the same thing. Did you disconnect the battery? Remove fuses? Do anything special to Discharge static electricity from the vehicle before playing with the airbags? I’m afraid of accidentally setting the side curtains off when trying to get to the bolt underneath. Thanks for the info and keep up with the great videos!

@bassemwahba6021 6 жыл бұрын

Great video! I have an f15 x5 with silver roof rails pre installed already, will I have to go through the same process to replace them to the shadow-line trim, gloss black? Thanks

@tanuow 4 жыл бұрын

Bassem Wahba did you get round to doing this? I have the same car as you and am doing the same roof rail swap this weekend.

@bjornb4897 7 жыл бұрын

Thanks a lot. I made it on an 5 series F11. It was almost the same procedure. Greetings from Germany

@alanz3138 7 жыл бұрын

Hi, Thank you for taking the time to do this video. I am going to install rails on my X3. I have a couple of questions. 1) regarding the clips. In video you said you removed them, but in the retrofit kit it says that 14 clips are used? 2nd question, the rails I picked up have a rubber sealing plug for around the studs. Did you put any additional sealer, like silicone too? Thanks

@przemdooh2289 7 жыл бұрын

Hi. Did you remove the clips ? I instaled rails without clips like in this video but i have doubts too.

@alanz3138 7 жыл бұрын

Przem Dooh , I did not need to remove the clips when I installed my rails. I also did not have to remove the clip holding the side curtain airbag. I was able to move the airbag fabric out of the way of the hole with my finger in order to get the socket with the nut up into the hole. One thing I did do when installing nuts onto studs was to use some electrical tape to hold the nut to the socket to prevent the nut from falling out of socket. I did this because the first nut I tried installing fell out of socket while going up into hole of body. Took me a while to fish it out.

@danielghita6827 7 жыл бұрын

Hi. I have a bmw x1 from 2010. Do you think is the same thing?

@cristianhorvath 5 жыл бұрын

Salut. Ai montat barele pe masina? Ai reusit?

@dahunking 8 жыл бұрын

Thank you for the video. With this video i need only 2h to retrofit the rails 👍🏼😁

@przemdooh2289 7 жыл бұрын

Hi. Did you remove the clips ? I instaled rails without clips like in this video but i have doubts too.

@mvmc1607 8 жыл бұрын

Ryan which the name of the bearing with a "gap" in the middle? hugs Marcus / Brazil

@hedlambert 8 жыл бұрын

MARCUS VINICIUS . O rolamento pode ser o RM2-2RS ou procure por v-groove bearing para outras medidas. Você vai achar no ML por R$ 56,00 mais o frete cada, mas na amazon você deve achar 20 por US 49,00. Boa sorte!

@mvmc1607 8 жыл бұрын

obrigado

@3D_Print_Mod 8 жыл бұрын

Please tell me what metal made rails and strong wear? From V - bearing small spot touch. will not twist some bearing rail in a week?

@maillooker 8 жыл бұрын

would you us the chain drive if you were building a cnc today 4/1/16 i am getting ready to build a cnc looking at the chain drive thanks bill

@szerintube 8 жыл бұрын

Thanks for posting this. I may need to do this install on my X3. About how long did the installation take?

@HikerToo 9 жыл бұрын

wow, good job. we just bought a used 2012 X3 without rails and want them added to help carry our bikes on top.....I appreciate this video, but will probably have the dealer do it for the $300 or so....

@chrishart01 7 жыл бұрын

Hiker

@sanok108 10 жыл бұрын

Great video, with very helpful information. One question : did you seal the holes for the new rail with anything, before tightening it down?

@alanz3138 7 жыл бұрын

sanok108 , I just installed the rails onto my 2014 X3, video was very helpful. I purchase my rails from a auto salvage yard and they came with the rubber gaskets on the studs but I still put a bead of silicone around the holes to ensure no leaks. One other note, Kit Yankees never mentioned about the rear passenger lights in the headliner. They don't need to be removed. Secondly, I didn't need to unplug any of the wires for the center map light roof console. Once I dropped the headliner I just slide the unit though the hole of the headliner to get it out of the way. I hope this helps.

@aroldfut 11 жыл бұрын

Excellent videos! Thanks for sharing all the efforts.

@neonamps 11 жыл бұрын

This is an answer to William Thixton's question (the new comment system for KZbin is incredibly frustrating! took me an hour just to get this far). The bearing number for the "doubler" bearings is: 6200-2RS (10x30x9 mm). I got mine from USABearings Supply.com in Ann Arbor MI but there are many places that sell this size, including Amazon. This size matches well with the V-groove bearings used for these CNC machines. Good luck.

@maillooker 11 жыл бұрын

can you tell the number of the bearing you used thanks

@neonamps 11 жыл бұрын

I can't say exactly what the effect might be but these ball bearings are designed for many millions of revolutions. One web site seemed to indicate that adding a small axial load, such as happens with this modification, will have very little effect on the bearing's life so I suspect the impact is basically negligible.

@neonamps 11 жыл бұрын

Thanks for the tip, Bailey. He's done some good tweaks, including one that I used for pressing the bearings up in their slots. He says his machine is good and tight now so maybe he has better ball bearings than I do. I appreciate your interest!

@mbailey9955 11 жыл бұрын

You should check out thegarageguy1 here on KZbin, he implemented just the modification you described st the start of this video! Thanks for posting this!

@TheMikeNan 11 жыл бұрын

I just built my first CNC machine and found way too much play at the end of the router bit. so I started researching why I had this play on an otherwise well built machine. Then i found your videos and double checked my set up and found all most all my play was the result of the same issues you identified in your videos. MANY THANKS for your efforts to share how you solved the problem. It solved mine as well. Again, MANY THANKS !!!

@Frankmali17 11 жыл бұрын

excellent results... How would you rate your satisfaction with the chain based driving... versus leadscrews... or rack... is it reasonably durable? it seems kind of ugly.. but very cost effective.... Thank you for the excellent video... I wish you had more insight and videos to share.

Ең жақсы KZbin

Пікірлер