I was about to buy an AC expansion valve for my crv and because I wanted denso part I look on amazon dense was 25 dlls but advance napa between 40 to 60 dlls So i rather get it from them instead of amazon, and then a day later this video came on my you tube app, thank you for share the video.

Pretty similar process to the xsr900. Crazy how the set of injectors are on top. I wish i can see better on how to get to the second set of injectors. (After removing velocity stacks) looks like im going to have to do this to our r1. i also wonder if its possible to sync the throttle bodies on this bike like you can with the xsr? I did that recently along with the plugs and injectors. one of the throttle bodies was like 2 degrees off. After fixing that made a huge difference! Huge power wheelies 1st 2nd and lifts a tiny bit in 3rd (might be suspension unloading) not sure definitely feels like it. If you have any video on how to get to 2nd set of injectors id love to see it! R1 has intermittent low power in 1st and feels like its not running on all cylinders. Valves recently done with plugs and filter.

did they ask you for any paper work?

Thanks for doing all that. You forgot to mention the other screw. The front 'tube' that points up and into the seat cushion has a 1 1/2" screw - a fat one - like a #10. Your 'tube' on the old part is broken there. The hole for that screw is IMPOSSIBLE to re-locate once you push it into the soft stuff. After WAY to much trying, I had to use a Self-Drilling screw and make a new hole. That is good because I could push the part closer to the cushion. My broken one didn't have that missing like yours. And it didn't have the side one missing / broken liker yours either so I'm not sure why I had the gap that seems to be on many C5's. The only thing broken on mine was one of the latches for the switch and I can't see that causing such a gap. Regardless - Thanks for the help. Like everything, it turned into a 2+ hour project. Much swearing, sweating and a trip to the hardware store to get the right Self-Drilling screw. Story of my life!

Thanks a lot my friend.👍

Appreciate the time you took to put this information out...Looking forward to an update on your dealership =)

Great service video!!! As far as the tail, paint that shit blue! Great bike! Clean!

bro didn't review it he fucking advertised it

Holy cow this chick is so out of breath! Geez.

I'd want to lift it higher just because of car preservation you never know what may be on the road not to mention speed bumps

Se lo yebo el corbette

Thank you for the video. I'm trying to find location but it's so hard. Almost nothing around or crazy expensive. Is there any recommendations?

What exhaust do you have in this video?

Because the lip is black as is the rubber mat on the floor, the lighting is behind the car the camera doesn't pick it up and *YOU CANNOT SEE THE DAMN LIP* ! ! ! ! !

ZO6 ❤️❤️❤️

Thats a c5 zo6 not c6

Awsome video i never would have been able to figure putting that clip back. Ty

Can you take the plate mount bracket off and just run the signals?

I’ve got a 2015 Rio. I often get 40-45 mpg

What location did you test at? I'm in Tooele

You think 800 watt rms amp would be ok for this?

I'm not a fan of the new zx10r I have the 2020zx10r best bike ever

Do you like the Moore mafia flash for the R1? Any issues? And is the XR-10r BT flash good? Any issues?

What is your daily driving car?

Awesome fix; I am looking hard at one of these Sentras to get as a beater vehicle; my only beater requirement is no major engine or trans problems, and a working a/c. Now when I start my search, if I come across with a/c not working, going to try your resistance trick on the knob and if it moves freely like you are describing, going to ask for more money off the price😊

Do I really need to order a new seal ?

Bro you did that with ease nicely done.

U run 91 oct ? I want a tt hellion kit so bad, but everyone said that we cant with 91 oct, but u do it ? Does it run well ? I need more informations 😂

Where did you get the black gas cap from

Thank you so much for the video!

Dude I think I broke that switch when flushing my radiator fluid. I burped it twice to make sure no bubbles in system. All fuses good compressor kicks in with AC switch and direction of vent s still work. I definitely need to check this as it's only blowing hot air . I haven't turned that switch to heat since I had the car 2002 Nissan Sentra set spec v. 🤦

there is a test that you'll never miss the original spark plug & that by testing the resistance by multimeter & it should give readings around 5k ohms. if they are more than 8k ohms it's fake & if it's giving under 3 ohms it's broken. you can find videos about this method

Can you share the link here fom Yamaha advantage…?

R1

You made it look weird , looks like a 600 or something

So satisfying.

235/40r19 15mm(front) 255/35r19 10mm(rear)

Bro 22k miles is low miles. You haven't even hit the first valve service time frame yet

Damn 22k? That's badass ill never sell mine i barely hit 6k and I've had it since October 23. You said you went down 2 teeth on rear sprocket or up 2 ?

Had an 07 R1 with 50k miles, keep the chain and valves adjusted and you’re good

Corvettes and R1's my kinda guy!

whos gonna tell him that 22k isnt that many miles? i have friends that have 60k plus on their bikes and my buddy has a k6 gsxr1000 with 100k on it, still runs like new too.

Good miles for the year, but the R1 is a tough bike certainly the older ones, people have ridden around the world, off road and across deserts on these bikes, should be good for easy 100k miles

why are you selling this nice bike?

4:00 7,5 ~8 true

Hello, Amazing ,

22k! That’s a fair bit! Hope you are well my old friend!

Ty, ty, ty! This was definitely my issue! I fixed it with confidence!

Nice bike bro

Can’t stand the gray accents Yamaha did on the factory fairings, this looks phenomenal 🔥🤌