David Charlesworth

Пікірлер

@dekalbes335 14 күн бұрын

.....rather useful , this.

@mathquir190 Ай бұрын

That is clearly too purist for me. I don't get that far and it won't make any difference to my sharpening needs.

@mathquir190 Ай бұрын

Still interesting and helps to understand the fundamentals and possibilities.

@davidatkins6919 3 ай бұрын

Just found your videos and I must say I am enjoying how you teach and fully explain / show exactly what you are discussing, not in a hurry like many others, thank you so very much!

@dustyoldwalnut-vt7ji 4 ай бұрын

Thanks

@johnhuggins5021 5 ай бұрын

David, Do you have a dedicated woodshop that is a separate building on your property? Or do you use your garage with all your woodworking equipment in it?

@ashcoworkshops 7 ай бұрын

Fab, so glad to see this video. Thanks so much 👍

@Aglaglagl123 7 ай бұрын

I mean this in the most complimentary way, but you have the best voice to go to sleep to.

@DraganIlich-r1s 7 ай бұрын

Thank you Sir.🎉

@DraganIlich-r1s 7 ай бұрын

Thank you very much Sir.🎉

@danielgeng2306 7 ай бұрын

Rest in peace David, you are a legend ~

@kens4741 8 ай бұрын

An excellent demonstration of a long awaited tool!

@tims.2832 8 ай бұрын

4 minutes into the video I noticed the Telefone. Probably everything was better back in the days (früher war alles besser, as we say in Germany). Very worthwile watching.

@123reivax123 9 ай бұрын

A great loss to the craft. An inspirational teacher.

@thethirdman225 9 ай бұрын

I could wish that attorney could put some indices on the pivot so that it would give a slightly more precise adjustment that turns. Not that it’s a bad system by any means.

@study_legal_history 10 ай бұрын

I learned much from his videos, starting with "What is flatness?"

@harleywood9588 10 ай бұрын

Very interesting. I set mine to .008 and for me that’s two pieces of blue painter’s tape. Almost .2 mm.

@jaywood8296 10 ай бұрын

Using a real brush for glue! So many folks do ultra-precision, ultra-expensive everything, then slop the glue on with a piece of junk.

@deanobenito 10 ай бұрын

Rip David thank you 🙏 for all the knowledge 💚🙏💯👊

@DAVIDMILLER-nc9vo 11 ай бұрын

For those hard of hearing, or not familiar with pronunciation by an Englishman, David's 10,000 grit ceramic waterstone is made by Ohishi.

@Nico-bu6bj 11 ай бұрын

How many students have died listening to your boring ass?

@treelore7266 7 ай бұрын

Well hello there, our young generation! Your virtuous display makes me brimming with hope for the future.

@laser170323 Жыл бұрын

Quite heavy breathing from David in this video.

@MrVinceb Жыл бұрын

Great commentary and demonstration! Thank you

@benconstruct Жыл бұрын

V good, but how would his chip breaker interact with bevel down plane with a reverse back bevel of 10•degrees(on the upper face). Ie; a York blade angle of 55•degree on a traditional 45•degree frog. (Ref. The trick of grinding the top of a bevel down plane blade tip to a 10•degree angle to create the York pitch) 📐I believe “his” technique for the chip breaker preparation would not work with Yorker blade in this style.

@studiohost Жыл бұрын

Never will be another David . I’ve enjoyed and respected his work so much. Thank you

@Dunc2222 Жыл бұрын

Beautiful teaching, including the perspective at the end about chasing errors. And perfectly timely for me. Thank you.

@MukehJohnson-q1u Жыл бұрын

Too great en educative video

@Guitars-KiD Жыл бұрын

Hii David!Haw i clean my self waterstone,its very dearty!?😢😢Doo you get idea?And how too save stones?

@karzankarem3198 Жыл бұрын

❤❤❤

@wingrider1004 Жыл бұрын

I have his DVD series....brilliant...RIP

@Ackbarfangirl Жыл бұрын

omg I feel so calm after watching this

@sambrownfurniture Жыл бұрын

Always calm, considered and the highest quality. A shame he's gone now.

@Exiledk Жыл бұрын

Planes sharpened up to 250,000 grit...

@RGRGJKK Жыл бұрын

Pura vida Don David I always enjoy your videos very informative and peaceful Rest in peace mi amigo pura vida

@b1j Жыл бұрын

I love that this still pops up in my feed. David was - and is - a gentle guiding light for the woodworker. Much love.

@robohippy Жыл бұрын

I heard some one comment a while back about how boards always have a hump in the middle. Then thought, well of course, the outfeed table on a power jointer is set slightly higher than the infeed table. No way to do that with a hand plane....

@fredpierce6097 Жыл бұрын

I don’t mind the time outs for David’s sighs and ruminations. I do my best thinking during those lapses. Why do people think that a mouth like a machine gun is more conducive to learning?

@mydearriley 11 ай бұрын

tiktok time limits

@gbwildlifeuk8269 9 ай бұрын

@@mydearrileytiktok time limits on youtube?

@gbwildlifeuk8269 9 ай бұрын

@fredpierce6097 Davids sighs and ruminations were his way of catching his breath. He had COPD.

@MarcusRefusius 8 ай бұрын

I’ve had COPD Asthma/Emphysema for years. I can very much relate.

@fredpierce6097 8 ай бұрын

@@MarcusRefusius god bless

@adolfocabrera1658 Жыл бұрын

Hola, espero se encuentre bien. Que bueno estaría que pudiera introducir los subtítulos en español, eh logrado comprender algo pero se me dificulta mucho. Saludos desde 🇺🇾

@fredpierce6097 Жыл бұрын

I’m unaware of any other KZbinrs who devote such serious attention to chipbreaker preparation. I totally trust that David is NOT making a Mountain Out Of A Molehill with respect to this matter!

@Jack-es9xq Жыл бұрын

simple practical instruction every time. it's time well spent

@kiemho4087 Жыл бұрын

Cho tôi đánh bóng cái bào mình thoa chất gì mà không rỉ sét bạn

@andyboxish4436 Жыл бұрын

How cambered is the blade exactly? The computer graphic makes it seem exagerrated, but isn't the camber in reality only near the edges? Isn't 90% of the blade perfectly flat with only 5% on each side being cambered (roughly)?

@christopherharrison6724 Жыл бұрын

The science of sharpening cambers explained perfectly

@scottsiejkowski8486 Жыл бұрын

I just heard about David's passing today. Although I never had the pleasure of meeting him, he changed my life forever through his books and DVDs. RIP Mr. Charlesworth.

@scottmatich1374 Жыл бұрын

Good stuff,would like to see more subject!

@Johnconno Жыл бұрын

How do you make a living? Because this is a hobby for you. Wealthy friends?

@sparkyheberling6115 Жыл бұрын

Mr Charlesworth, when using the honing guide. you appear to apply pressure only on the pull stroke. Is that to protect the stone against accidental gouging?

@MintStiles 2 ай бұрын

Water stones are very soft, so you definitely don't want to dig in. It's also far more consistent to use the clean areas. You can't doing that going back and forth, creating micro ledges during overlapping areas. Personal opinion: you probably don't want the burr to break by taring on the push stroke as that can damage the prepared edge. This is something that you want to pull off with the finest stone that you will end your sharpening on. You can do all this faster on an oil Arkansas if you are good with freehand. You can raise the micro bevel by a degree or two and then pull on the bevel side, using the same going past the stone 1/2 inch on the flat side. The oil stone can go far longer before flatness issues comes into play, where as water stone go out of flat even with a few strokes. Flatness is absolute and you should do everything to ensure the flatness is kept. The bevel side is far less of an issue. If you gouge, just take it back a bit more. The chisel is probably the most fragile tool since going out of flat renders it into a completely different tool.

@bobjones3027 Жыл бұрын

So glad to see this classic pop up again. David’s wisdom is a timeless classic.

@executive Жыл бұрын

why not chisels?

@lincolndickerson1293 Жыл бұрын

Because with a chisel you want to be able to hold the back of the chisel in a dovetail or half lap… against a wall off wood and have it meet squarely at the bottom. If you use a back bevel of any sort you cant get the a square corner at the bottom

@executive Жыл бұрын

@@lincolndickerson1293 why not. the difference will be be a few micron.

@andyboxish4436 Жыл бұрын

@@executive I think the idea is that as the chisel is hammered/struck and is rapidly cutting through the wood, the 2/3 of a degree back bevel, while negligible in most other applications, may, and I repeat may because I am not sure myself, but it may steer the chisel off its intended path slightly.

@executive Жыл бұрын

@@andyboxish4436 the path difference is imperceptible and you steer the chisel with your hand (for example it is sometimes desirable to undercut slightly )

@cwell2112 Жыл бұрын

@@executiveThe real reason is that you want to be able to use the flat back of the chisel as a reference for paring. If there is even a small back bevel, you need to raise the back off the workpiece in order to take a shaving, and that defeats the purpose of the back as a reference.

@ghostlyface2789 Жыл бұрын

How is the health and u ok

@timothymallon Жыл бұрын

I wish we had more time with you sir! May you rest in peace!

Ең жақсы KZbin

Пікірлер