Why not carry by hand .

Great shots, Leah!

Can the bucket accept a " Poly Edge " for snow removal. ?

Have one.. cost more than the John Deere 322 I put it on, but still the most bang for the buck I got for anything I've ever bought. Winter is the only time it gets a break only because I have a dedicated CCadet 3184 with a 4 way blade, chains, weighted tires and ballast in the rear.. Even then, if snow piles up too high I can still move it away with the LBL..

👍👍👍👍👈👈☝☝

Way to go guys keep it going. Mines doing great, I've added strength ingredients to the areas where the cylinders mount. I sent pics

Go guys

Hello guys, I added strengthening braces to the 420 bucket 4 on the center and two on each of the outside ones. By doing that it strengthens all areas and keeps the original ones from bending. I added a full bead around and left a weep hole for water after grinding the points down.

Love it. Took me like 2 hours to line everything up and weld it on to my prexisting little buck loader.

Hello I got the buck loader for my deere 420 around 5 years ago. Watching this just gave me a brain fart. Why not offering the electric lifts to the 420 or others like by doing that one will have the cylinders opened for something else. I should of stayed in fabrication but im to old. Keep up the great work guys and maybe one day I'll drop by

Luke what about a smow plow for the bucket, just remove the bucket and add the plow blade

Hey guys, I got a loader a few years ago and all is great. It's moved dirt, gravel, plus snow and actually dug some small holes. A good addition would be a attachment for holes while using the bucket tipped like ones dumping the load. I'd say use a mounting area on the upper edge of the bucket below the dump cylinder then one could notch 2x2 square then bend to angle needed then weld. There will be two mounting areas and bracing inside and out. That being built properly could be used for a stump attachment for small trees. Also on the 420 deeres concider adding angle mounts from the top back at a angle to a area where there's a clear area under the frame. Talk again and thanks

Can you please give me some information on the hydraulic cylinders

You need to put hard lines on loader where you don’t have those long rubber lines on your loaders. Also it would be better to use a bar under the tractor for your main attachment

What do you define as light digging?

Will I need to add weight to the rear of my x738 for the Little buck to lift 350 lbs?

Nice job shooting the footage, Luke! And great editing Leah!

Looks great & very usable added tool!

Can these set ups fit on cfmotos ? And if so how much does the whole set up cost

A rare case where I spent more for the LBL than I did for the old 1992 322 John Deere tractor I put it on... and never regretted it.. That's a testament as to how useful they are..

will the Little Bull work with a GX325 or is it too small a tractor?

What's going to happen with all that weight on the front wheels? Your drive and steering are dependent on the load sitting on the back wheels. I'm not crapping on your invention. I'm here looking at it because I wanted to make something similar for me to level dirt for a pool. So I obviously admire what you have done. But that question is why I haven't done it myself. And what you have built is far superior to anything I could hope to do. I'm just a poor carpenter.

I got a x758 and was deciding between a CTC or a Little Bull to move rock for a driveway I was curious if the x758 could do it

👍👍👍👍👍👍

👍👍👍👍

Awesome

Hi, I have a 05 x495, not 4 wheel drive but with the yanmar 3 cyl and its a beast. Can you tell me how you like the Little buck and why you didn't go for the little bull?? Been thinking about one or the other but I have a hard door curtis Cab on mine and I guess the little bull won't work with the cab installed. Just trying to figure if its worth it and how it performs, weight on the front, etc. I will be doing yard work and some minor digging so I would opt for a tooth bar. Sure is less expensive then a skid steer. thanks for the opinion and help.

Is this available for a Ariens 2350 zero turn, thanks

Do u ship to canada

Are you guys still in business?

Does this work for shoveling snow

I was ready to order one but the added shipping cost put me over the budget

I think this is one of your best demonstration type videos! 🎉. Really awesome camera work too!

Best purchase yet for our hobby farm, will probably buy another one!

👍👍👍👍

It will out work you every day❤

That is not work…that is how you play in the snow in style 😊

Need to get one of these buckets for my 739 tractor

Pretty awesome how much?

Awesome

Yep, I need one…show us more!

Ok, I definitely need to order that for my Little Buck loader!

Is this bucket loader homemade or an option for John Deere?

Класс. Хорошо должен помогать этот захват. 😎👍

is there a loader for the John Deere S100 lawn tractor?

What’s the weight capacity

Классный трктор. 👍 я себе тоже такой собрал🙂

I bought one a few years ago.. Moved some really heavy snow with it after an overnight heavy wet snow. moved enough to get the plow out. Doesn't take the place of a plow but it sure gets rid of the piles of snow. The bucket loader was expensive ( actually more than the tractor ) but it's a 4 season implement. I don't regret it a bit...

Considering he is doing this with a lawn mower, this IS impressive, it will outwork you and your shovel all day!!😊

Works well to break up driveway ice😊