HyperDash Garage

Пікірлер

@Kanrinin01 5 күн бұрын

without any block guard, be ready to destroy a lot of head gasket and the block himself. It's better to risk overheating than being sure to destroy your engine.

@hyperdashgarage 5 күн бұрын

@@Kanrinin01 I put a block guard in before I put the head on …. It’s just not shown on this video

@whatsyurprob158 18 күн бұрын

Today builders are catching hell trying to find a cnc [countersunk] sprocket under 40t. Amazon, you can get a 36t, but that's absolutely it, and they want $30 for it. 🤮 Supply chain issues are manifesting quickly now >>>> and it's going to get much worse, which is why I built a Switz Cruiser, Minarelli [ULTRA] >>>> shooting for 12 hp 😎 🇺🇸

@whatsyurprob158 20 күн бұрын

So, what happened? My first build = Switz Cruiser + Minarelli ULTRA [HP EVERYTHING] from California Motorbikes.. I'm tripping on Cerakote for the top of the piston which should eliminate the cold seize problem Aluminum seems to always have when paired with Iron. I hear it's been used on go-carts for well over a decade, so it must work pretty good. My build starts this week after I get my last piece >>> cnc clutch. After I get it tuned to par, I think I'm going to look into a cnc case, cuz, I want to use a cnc engine mount on the rear >>>> there isn't enough room for the mount on my cast case, a mere .32" needed for the right stud hole to line up, but the clutch housing stops it all. 😡

@NoImpres. Ай бұрын

looking good!

@errorz8488 2 ай бұрын

bruh my 150 goes 60 no problem with a pwk, amazon exhaust lol

@hyperdashgarage 2 ай бұрын

What’s your point ??

@errorz8488 2 ай бұрын

Something might be wrong with ur engine man ive never had a problem getting them up to 60 anyday even stock@hyperdashgarage

@Isaac.kenobi 2 ай бұрын

So what do you think it was that blew up the motor?

@hyperdashgarage 2 ай бұрын

@@Isaac.kenobi bearings got messed up somehow

@Isaac.kenobi 2 ай бұрын

@ you did say you’d send it to 8k every time you drove it 😂

@hyperdashgarage 2 ай бұрын

@Issac.kenobi lol that’s facts

@kidnextdxxr 2 ай бұрын

Yo I’m bouta do the same as I blew my stock one up the other night. Did u hone the cylinders or anything before putting them in?

@hyperdashgarage 2 ай бұрын

@@kidnextdxxr i didn’t but your supposed to

@kidnextdxxr Ай бұрын

@ ok gives me more confidence. What size pistons 75mm or 75.5? Also what did u gap ur rings to

@hyperdashgarage Ай бұрын

@@kidnextdxxr I used standard sized pistons and i gapped the rings to turbo specs… I forget the actual numbers but I got them online

@ericjr2002 2 ай бұрын

After putting the uni filter, did u have to tune it

@hyperdashgarage 2 ай бұрын

@@ericjr2002 I upgraded carbs and exhaust at the same time so I did have to tune it

@irvinkiersilverio6012 2 ай бұрын

Gy6 in the phillipines 100kph plus Easyride 150N, 150Q, 150P, 150P, 150Fi gy6 engine

@claydough18 2 ай бұрын

Do you go to any of the meets here in Jacksonville

@hyperdashgarage 2 ай бұрын

@@claydough18 nah which ones ??

@pmacc3557 2 ай бұрын

What's it like to pull uphill?

@hyperdashgarage 2 ай бұрын

@@pmacc3557 pretty strong since it’s a 2 stroke

@alvarojcamposg 2 ай бұрын

I put - 150cc performance exhaust -11gram Glixal weights (Dr Pulley style) -Glixal Performance variator kit -ankle bitter mod (cvt cover left off) -Gates belt 835 20 30 -42mm pod filter Runs 55 smoothly, recorded top speed 64 (downhill) Still gotta adjust the carb setting on the factory one to squeeze some more power out of it but other than that I’m only planning for -14-38T Gear Up kit & - Glixal Aftermarket Bell Housings cover. Thought of an after market performance clutch, red spring and all but after the gear up kit and carb tune if I don’t get a better top end speed.

@NiccoDeAbreu 20 сағат бұрын

I run 55 on 80cc easily. With an air leak. Interested to see what it’ll be like with no air leak

@exachi49 3 ай бұрын

Looks great

@frias2287 3 ай бұрын

Good job bro 👍

@darkenergy361 3 ай бұрын

anybody that has a GY6 leave it alone leave it stock keep the oil change on it. Keep the gear oil changed GY6 150 cc average is 55 to 60 mph and if you want to go faster, maybe move up to 250 cc or more

@hyperdashgarage 3 ай бұрын

I disagree with leaving it stock

@calebbierig3573 3 ай бұрын

@@hyperdashgarageyeah same these things are little beasts when you put some slight mods on them. Where the real power comes in is if you can fine tune your stuff. I've got a stock gy6 150 to go 84mph on high octane vp racing fuel and at the time I couldn't be touched by anyone on any little bike 😂.

@calebbierig3573 3 ай бұрын

250cc would be absolutely insane tho I'm not disagreeing about that I bet you could go 120mph on a 250cc shiii

@bornsinner_x7304 3 ай бұрын

💯💯💯

@TJBoosted 3 ай бұрын

dangggggg 9 months only?

@hyperdashgarage 3 ай бұрын

It might have been less actually…😢

@pistolgripp127 3 ай бұрын

Is all this the same for GY6 X-Pro 200cc aka 168.9 cc.?

@hyperdashgarage 3 ай бұрын

@@pistolgripp127 I don’t think it’s the same parts but it will be the same concept

@pistolgripp127 3 ай бұрын

@@hyperdashgarage how can I get some extra hp out.?

@hyperdashgarage 3 ай бұрын

@@pistolgripp127 big bore kit

@lazyboy91113 3 ай бұрын

Your voice echoing sounds trippy

@manuelmoraila3386 3 ай бұрын

I fucked up with my civic when I rebuilt my engine (all stock). I decided I would change out my motor mounts since I was pulling out the engine, which was perfect cause most of my mounts were either on there way out or F’d and two of them were completely shit. Where I F’d up was going with solid aluminium mounts, I mean they do have some poly/rubber idk what the exact material is but basically what I’m saying is that now my all stock daily, vibrates like a damn sex toy lmao 🤣

@kidnextdxxr 2 ай бұрын

Yea I’ve been dailying those mounts from 1320 polyurethane mounts is the name

@heavybreathinghonda7150 4 ай бұрын

Hell yeah I miss my z6 ej1

@danielmoore394 4 ай бұрын

Would expect at least 65 mph with all the mods my stock gy6 150cc does 60 mph

@hyperdashgarage 4 ай бұрын

I did mods for acceleration not really speed

@milekh6681 4 ай бұрын

I installed a $9 12v inline fuel pump in mines

@TalanisYoung 4 ай бұрын

Sounds nice

@tiredofinsanity 4 ай бұрын

Me and my buddy just switched to electric. Only 10 bucks on the one we used. I never really had problems with my vacuum pump. With my mods i could get up to 68 mph. Every now and again it would run dry and slow me down at full speed. Rarely though. Getting ready to go big valve head and big bore kit with cam so electric it is. Cheap enough to carry a spare too.

@hyperdashgarage 4 ай бұрын

@@tiredofinsanity Niice !

@STUDIO-514 4 ай бұрын

That’s crazy man I’ve raced a Forte GT with my Z6 and he lost ! Forte must have been modded for sure. Love your build tho man can’t wait to see what you do next!

@rogerstafford-wakeinc.2088 5 ай бұрын

Look at you doing big things brother!! Awesome man. Glad to see you.

@hyperdashgarage 5 ай бұрын

@@rogerstafford-wakeinc.2088 thanks man👍 im just out here tryna have some summer fun ! 😎☀️🌊🚤🏖

@rileycoish7906 6 ай бұрын

😂 yah the 28 is gonna be sick he's definitely going fast I got a speedo so I'ma find out what it does with all the goodies.

@hyperdashgarage 6 ай бұрын

@@rileycoish7906 should be faster with the 28 if you have the extra power

@djtomtrain2015 6 ай бұрын

3 years old. I make 50 mile trips on weekends and drive 6 miles to work. U can daily easily. Gen 1 here tho needs led s all around.

@frias2287 6 ай бұрын

Good job bro 👍

@frias2287 6 ай бұрын

Nice job bro 💪 💯

@hyperdashgarage 6 ай бұрын

@@frias2287 thx bra 💯

@frias2287 6 ай бұрын

@@hyperdashgarage welcome brother

@charlesphilips2920 6 ай бұрын

gapped bt a rando yo wtf still cool make her fast

@hyperdashgarage 6 ай бұрын

I’m tryin 😂…

@TheBobRick 6 ай бұрын

Cool.

@drivingdaily582 6 ай бұрын

Cool

@jgoni20 6 ай бұрын

How is it after 6 months? I'm planning on doing some mods and this will be the first..

@hyperdashgarage 6 ай бұрын

Great … it needed to be broken in at first but after that it’s a good upgrade for sure

@thegraphicw 6 ай бұрын

Step up to heavier rollers. Observe the belt riding in the variator while the back wheel is up on the stand. You want to be sure the belt is riding all the way to the top at full RPM. You may need a longer belt if the variator guide is larger than the stock one. If the belt is too short, it will never ride at the top of drive pulley which is part of the way performance variators give you extra speed.

@kubo..55227 6 ай бұрын

motor specs?

@hyperdashgarage 6 ай бұрын

Minarelli hybrid motor with a mikuni clone and rm 85 exhaust(if I recall correctly)

@rogerstafford-wakeinc.2088 6 ай бұрын

Glad to see you. That Del Sol is a classic limited build. Great job!!

@hyperdashgarage 6 ай бұрын

Thx man 👍

@freerunning9z 6 ай бұрын

Question. For me to get more on my GY6 ruckus. I have to give it A LOT of throttle! What do I need to do to fix that?

@hyperdashgarage 6 ай бұрын

I would start with an intake, carb upgrade, exhaust, variator, a new belt(if it’s old and worn) and some tuning 👍good luck

@freerunning9z 6 ай бұрын

@@hyperdashgarage I just ordered a new carb, filter and throttle cable! Also, 11 gram and 16 gram rollers, the ones That are oblong

@the_mystery9803 7 ай бұрын

tidy work bro

@the_mystery9803 7 ай бұрын

so 25 psi for next tune? 😂😂 sounds mean bro

@hyperdashgarage 7 ай бұрын

😂 thx 👍

@Cosmo_Hunter 7 ай бұрын

How much wheels are you pushin

@hyperdashgarage 7 ай бұрын

In this video under 200 but currently 200-300 on 15psi…I’ll put out another video of the car on the new tune

@harmindersingh6036 4 ай бұрын

How much did the build cost you?

@hyperdashgarage 4 ай бұрын

@@harmindersingh6036 about 7k, but it can be done for way cheaper… I just decided to buy more expensive parts

@the_mystery9803 7 ай бұрын

Sounds tidy as bro, just picked up a 1.3 5 speed corolla keen to turbo like 5psi too ahaha that removable roof is sick aswell goddayum

@hyperdashgarage 7 ай бұрын

Nice what do you use for engine management ?

@the_mystery9803 7 ай бұрын

@@hyperdashgarage I haven't done it yet but its carb so just bigger jets when i do it ahaha

@hyperdashgarage 7 ай бұрын

⁠@@the_mystery9803I’m jealous, that’s going to be way cheaper than buying a custom ecu 😂

@the_mystery9803 7 ай бұрын

@@hyperdashgarage hard bro but i feel tuning is going to be harder without a computer 😂

@DirectCurrent4u 7 ай бұрын

These Fake Faker frames are pure Junk! They may look kuel but there are made to break. 16 or 18 gauge metal tubing is much stronger than this cheap Chinese aluminum bikes.

@ProfessorSnape22 7 ай бұрын

How did you make this motorized?

@hyperdashgarage 7 ай бұрын

I installed a motor on the frame

@ProfessorSnape22 7 ай бұрын

@hyperdashgarage do you have a video on how you installed it? Making this set up? I feel this is better than me using my electric bike

@hyperdashgarage 7 ай бұрын

Yeah i have a couple on my channel…. Check them out 👍

@EdKennedy-ws8wu 7 ай бұрын

When you grow a pair show us how fast it goes 🤣

@hyperdashgarage 7 ай бұрын

I have a top speed video check it out

@hyperdashgarage 7 ай бұрын

You mad 🤣

@EdKennedy-ws8wu 7 ай бұрын

Scared to give it throttle 🤣

@xx585xx 7 ай бұрын

A link for parts would be nice anyone?

@OxyWavez21 7 ай бұрын

what size sprocket?

@hyperdashgarage 7 ай бұрын

I think we’re both running 32’s in this video

@mandapalque 7 ай бұрын

You are in cleawater, how do i contact you. I think we can both help each other. That is missouri Ave.

@hyperdashgarage 7 ай бұрын

Hit me on instagram @turboken91

@mandapalque 7 ай бұрын

@@hyperdashgarage I don't use/have instagram Only FB & KZbin

@mandapalque 6 ай бұрын

@@hyperdashgarage I do not use Instagram

Ең жақсы KZbin

Пікірлер