Awesome video, I bought the plans! A question I haven’t seen anyone else ask.. how are you transporting this or how are people picking it up? Seems like a large box trailer or utility trailer is the only option? Thanks for your videos.
@yellowhammerwoodcrafts3 күн бұрын
I sold it to an event coordinator and she has a box truck
@bambidoesdigital7 күн бұрын
Thank You! This is a really nice build
@yellowhammerwoodcrafts7 күн бұрын
@@bambidoesdigital thank you
@acek1008 күн бұрын
U need a ripping saw blade
@loarinavega42569 күн бұрын
Does that heat up the heat or the candy machine up against the wood That cut out enclosure doesn't that heat up and caused heat up against the wood r Is that safe for like fire or combustible heat against board
@yellowhammerwoodcrafts9 күн бұрын
Haven’t had anyone that has one of these say anything about it being too hot and they’ve been using it over a year
@yellowhammerwoodcrafts11 күн бұрын
Woodcraft
@chipomfune440811 күн бұрын
I am trying to decided on which plan to purchas. Between The 3foot Narrow and the 3foot Wider wide. I like the size of the ones you have in your video, is that the 4foot wide or narrow?
@yellowhammerwoodcrafts11 күн бұрын
Letters are 36” narrow. Numbers are 48” narrow. I don’t care for the wider ones
@chipomfune44089 күн бұрын
@@yellowhammerwoodcrafts Thank you
@barrylane891512 күн бұрын
Hi David, Where did you find the small miter box
@emyodom148912 күн бұрын
Could you show how to wire an “X”
@yellowhammerwoodcrafts12 күн бұрын
@@emyodom1489 I have a few videos showing how to wire the letters
@rickhshepard14 күн бұрын
I had the breaker on my switch trip when I was cutting heavier loads on the table saw. Both Vac and table saw were on the same circuit. I abandoned the switch and put Vac and table saw on separate circuits (table saw on a 20a and vac on a 15a.) This solved my tripped breaker problem. I just have to turn the Vac on and off manually.
@villeneuvewoodworks14 күн бұрын
Liking your shuffle dance arch moves 🕺
@raidakhan14 күн бұрын
Thank you so much for posting! Would you say this is foldable or collapsible? 😮
@yellowhammerwoodcrafts14 күн бұрын
5 pieces like the video shows.
@Sara-yv6er16 күн бұрын
You finally got a CNC! Way to go!
@villeneuvewoodworks18 күн бұрын
Shared this with a wedding rental company down in Kansas. Hopefully, they’ll be buying a set of plans from you & gain a subscriber
@anetralewis305325 күн бұрын
Thank you for such a fantastic video. You do such awesome work. Do you have a plan for this? I tried to follow along. Got confused.
@yellowhammerwoodcrafts25 күн бұрын
@@anetralewis3053 no plans for these yet. I might do some eventually
@anetralewis30539 күн бұрын
@@yellowhammerwoodcraftsok please let me know if you do. How much material i need to purchase ?
@janetbirkner670925 күн бұрын
The lightbulb link says they are 5 watt. Is this the one you are still using or are you getting a brighter one now?
@yellowhammerwoodcrafts25 күн бұрын
@@janetbirkner6709 I’ve changed over to a brighter bulb. I think they are still 5 watt but it’s LED and equivalent to 15 watts
@yellowhammerwoodcrafts25 күн бұрын
@@janetbirkner6709 here you go amzn.to/3xOLll4
@janetbirkner670925 күн бұрын
@@yellowhammerwoodcrafts thanks so much! I love your videos, they are so helpful!
@janetbirkner670925 күн бұрын
Would recommend to start with the 3ft letters or the 4 ft letters?
@yellowhammerwoodcrafts25 күн бұрын
@@janetbirkner6709 most people will take whatever you have and 3’ is cheaper to build. I have 3’ letters and 4’ numbers
@gregbarber865926 күн бұрын
I really like this but do you have any problem with them blowing over?
@yellowhammerwoodcrafts26 күн бұрын
Base is big enough to keep from that and these would mostly be for indoors.
@reddlief26 күн бұрын
Great explanations - I'm skipping the casters, as our cats are heavier and leap up and down...even locking casters will be taxed. We also need to weight the base to avoid tipping..could attach an anti-tip rope to wall or bracket to floor but painted drywall and hard wood floors need to be kept whole.
@yellowhammerwoodcrafts24 күн бұрын
I’d probably just do a thicker base. Instead of one or two 3/4” sheets doubled up, do 3-4 and that should definitely keep it from tipping
@rickpouley756127 күн бұрын
I have this same planer... It works great!
@lisamariedesignboutique27 күн бұрын
Great video, thank you so much for the information. Couple things, some of the links on your website (female/male plugs) are not correct. One link says SPT-1 and the other states SPT-2 so it is unclear which you are using. Lastly, I purchased your rental contract and it is in PDF form. It would be better if it was in a word doc so it could be edited. I appreciate that it was inexpensive, however, its a pain that I now have to try to copy and paste the entire 5 page document into a word doc and then edit from there. Just some feedback 🙃
@yellowhammerwoodcrafts27 күн бұрын
Thanks for the feedback. I was unaware it wasn’t editable in PDF. I’ve sold probably a hundred copies and nobody ever mentioned that.
@lisamariedesignboutique27 күн бұрын
@@yellowhammerwoodcrafts hahaha yeah you have to have a paid version of adobe in order to edit a PDF 🙂 also for my own clarification are you using SPT -1 or SPT -2 for the plug? Thanks!!
@bmcd695129 күн бұрын
ROLL TIDE! Great job!
@ReedAllen162Ай бұрын
Very nice David. What is this going to be?
@yellowhammerwoodcraftsАй бұрын
It’s the top to a stage/ platform I’m working on for an Event planner. She has props to go with it.
@ReedAllen162Ай бұрын
@@yellowhammerwoodcrafts the same one that got the wavy walls?
@yellowhammerwoodcraftsАй бұрын
@@ReedAllen162same one
@justicebinion810911 күн бұрын
@@yellowhammerwoodcraftsis there a way to describe this jig. Like details on how to cut out an 8ft stage?
@yellowhammerwoodcrafts11 күн бұрын
@@justicebinion8109it’s called a circle cutting router jig. They sell them made out of acrylic that are made to attach to any router. I just made my own. Pretty simple. If you want an 8’ circle you just need a hole at 4’ from the router bit for the pivot pin.
@janetbirkner6709Ай бұрын
I can’t find the build plans in your Etsy shop.
@yellowhammerwoodcraftsАй бұрын
They aren’t my build plans. You can get the plans from DIY wedding market on Etsy.
@rcrogers6Ай бұрын
It looks just like the Wahuda.
@yellowhammerwoodcraftsАй бұрын
I’m sure they are comparable
@donpierce9687Ай бұрын
Did you have plans for this build?
@yellowhammerwoodcraftsАй бұрын
No. Sorry.
@muhsinprasala9078Ай бұрын
Can I make this for under 500
@yellowhammerwoodcraftsАй бұрын
No. You can for double that.
@TB-LivingFreeАй бұрын
New sub here from 731 Woodworks
@yellowhammerwoodcraftsАй бұрын
Thanks for the sub!
@CodeFoodPixelsАй бұрын
For your carpet, you could have done the join in the middle of the post, then you could just butt the two edges together.
@skeery2605Ай бұрын
Just came across this vid. Im sure you've been able to get it fixed. If not, I got your cutterhead on my shelf in md tn.
@dongrundy8165Ай бұрын
I just watched your video on making the letters. You started out saying you used 1/4" plywood, but in the video, the plywood looks a lot thicker. Is it 1/4 in or thicker?
@yellowhammerwoodcraftsАй бұрын
1/2” back, 3/4” sides
@tedrahayden5215Ай бұрын
Where did you purchase the plexiglass?
@yellowhammerwoodcraftsАй бұрын
Home depot
@normanwein8741Ай бұрын
Do you get requests for different color letters or lights, or do you just keep them all in white?
@yellowhammerwoodcraftsАй бұрын
White is the most popular color for events and I e never been ask for any other color.
@jbitile8241Ай бұрын
How much can you sell one for if you did. Not rent it but sell the letter to someone
@yellowhammerwoodcraftsАй бұрын
I used to sell them but not anymore. They sold for $180 a letter and $220 for the 48” numbers
@Paul-CoburnАй бұрын
Great job David. Came over from 731.
@yellowhammerwoodcraftsАй бұрын
Thank you!
@vaughnm90Ай бұрын
RTR Florence,AL here!
@yellowhammerwoodcraftsАй бұрын
Roll Tide
@ebbonigaspard65Ай бұрын
You do awesome work and you're also fine craftsmen. We love Pitbull's, our pits name is Alpha. He's the most loving fur-baby.
@yellowhammerwoodcraftsАй бұрын
My pit is my big baby. He’s given a lot of love.
@yellowhammerwoodcraftsАй бұрын
So I said I would tell everyone what I sold these for. I had about $300 in materials and sold them for $700. I had about 4-5 hours in them.
@ReedAllen162Ай бұрын
Very nice video. Thanks for going over some of the details in 731’s live stream. I do mainly cutting boards and stuff. But I want to start making bigger stuff like you do. I also need to utilize my cnc more.
@yellowhammerwoodcraftsАй бұрын
Hoping to get to use mine some more now. I’ve sold about $300 worth of things made from it, so looooonnnng way from paying for itself
@kencross25Ай бұрын
RTR! First video after watching you on 731 Woodworking podcast. You have produced a wonderful idea that displays both your creative and woodworking skills. I will be looking into this project's feasibility in my area (Mobile).
@yellowhammerwoodcraftsАй бұрын
Mobile would be a great area. Probably a lot of events in that area!
@ebbonigaspard65Ай бұрын
This is one beautiful Cart.
@yellowhammerwoodcraftsАй бұрын
Thank you! I’m working on Build plans for it.
@donwoodshopАй бұрын
$350. Materials about $90
@yellowhammerwoodcraftsАй бұрын
Man you gotta tell me where you are buying 3 sheets of 1/2” plywood and 1 sheet of 1/4” plywood and 12 2x4s and 2 quarts of paint for $90. I’ve been shopping at the wrong place…lol. Materials were right at $300
@lyvetawright6298Ай бұрын
Looks great!! I would love to purchase! Can this be shipped to NC?
@yellowhammerwoodcraftsАй бұрын
No, sorry. I don’t ship them. I do sell plans for it though. If you can find someone local to build it.
@mathematicalmakerАй бұрын
Is the speed of the VFD spindle controlled by the software/g-code? One of my concerns with using a router is having to manually set the speed using a dial.
@yellowhammerwoodcraftsАй бұрын
Yes it is controlled in the software
@muhsinprasala9078Ай бұрын
How much did the materials cost you
@yellowhammerwoodcraftsАй бұрын
Right at $1000
@BuildwithMooneyАй бұрын
Nice build, love the bright colors too! I hear you loud and clear on building multiple things, unless it's for a kindergarten class of course.
@yellowhammerwoodcraftsАй бұрын
You build those garden stands over and over right?
@BuildwithMooneyАй бұрын
@@yellowhammerwoodcrafts Lol I totally forgot about those and yes I’ve built about 40-50 over 4-5 years so not so bad plus it’s a big money maker! I’m talking more like a bunch of anything at one time like 100 cutting boards no thanks! 💪👍🏻
@yellowhammerwoodcraftsАй бұрын
@@BuildwithMooney yeah that’s just not what I like to do. I don’t know how Jennie and Davis sell thousands of dollars in cutting boards every year. That’s so boring.
@BuildwithMooneyАй бұрын
@@yellowhammerwoodcrafts It’s their money maker, we all have our preferences. Just like your letters!
@adolfoorozco4804Ай бұрын
$1 dollar, but serious answer is $600
@yellowhammerwoodcraftsАй бұрын
That’s pretty close but it’s more
@MrDmorgan52Ай бұрын
$750 for 3
@magnoliaoakswoodshopАй бұрын
Hi David, great video! I'm looking at getting the Shapeoko 4 XL model. I was wondering if you remember approx how long it took for assembly of your machine? Also, do you think building an enclosure is a must? For both dust and sound purposes on this unit?
@yellowhammerwoodcraftsАй бұрын
Mine is not loud at all. I don’t think an enclosure is necessary. Took about 5 hours to build.
@amandalanier-pn2khАй бұрын
Do you sell these?
@yellowhammerwoodcraftsАй бұрын
Rent only
@salsgarage_ox1103Ай бұрын
how many letters do you connect per extension i had issues were they keep blowing 5x20mm fuces on the cords when i use more than 4
@yellowhammerwoodcraftsАй бұрын
If you have a problem with four letters, there’s something very wrong with your wiring. I’ve had as many as 15 connected together for hours and no problem. You should be able to connect the entire alphabet on one outlet with no issues. Your bulbs should only be 1 watt.
@justadream_ugcАй бұрын
Where can you buy the 6x8 ft plexiglass?
@yellowhammerwoodcraftsАй бұрын
I used two 4x8 sheets and cut a foot off both. I couldn’t find any local 6’ wide but there are places that had it. Was just too far away for me.
@justadream_ugcАй бұрын
@@yellowhammerwoodcrafts Could you share who the 6'? I want to create this without the seem and willing to pay shipping
@yellowhammerwoodcraftsАй бұрын
@@justadream_ugc I just googled places with plexiglass and called around. I have no idea what places they were now. Sorry.