Give a farmer a few minutes and he’ll make it simpler for themselves. Great job, if ever that farm, I’m going to give this a try. Thanks.
@sandrarichardson2713 Жыл бұрын
Beautiful garden plot!! Would it be possible to show you either taking the hiller off or putting it on the tiller. Also a good walk around view of the hiller? Some folks can just glance at something and reproduce it. I have to see close up and personal how it looks on each side and what's going on...lol. Thanks for sharing this idea....exactly what I am looking for but not a clue how to bring it pass like you did. Jesus bless.
@philcrandlemire Жыл бұрын
I am not able to show you how to attach it or remove it but I can say it was just held on with ratchet straps and I used these for many years.
@Kuderik2 жыл бұрын
I have a similar 5ft tiller. This is genius you just saved me from buying a garden bedder!
@philcrandlemire2 жыл бұрын
I am so happy to hear that. It's worked great for me for a number of years and it was all made with scrap lumber and pieced today in an afternoon. I've see some people modify the design and make some nice metal hillers but believe me this will do everything you want it to do. Just remember to rototill the ground well first and then attach the hiller and make your final pass otherwise you won't get the same results.
@HealthSupercharger2 жыл бұрын
@@philcrandlemire I wonder if I can make something similar to pull with my truck, our garden is 18ft wide and 300ft long so I wonder if I can use a pickup truck with low tire pressure and a 16ft long 2x 6 to make a path digger at least because digging pathways after using my 22 inch rototiller is work and if I can do it with a single pull of my truck in lowest gear slowly then that would be good for planting potatoes or I could make my beds by just taking the top flat. That way with 3 passes I would have 2 beds.
@philcrandlemire2 жыл бұрын
@@HealthSupercharger I guess what I would wonder is how to keep your path digger going straight. Maybe if you had someone behind holding it and guiding it -- like people did in the old days when plowing with horses. Also, I don't know why you would need a 16' 2X6 -- take a look at old time plows and such. Good Luck!
@JonTopping2 жыл бұрын
Would it be a good idea, or a bad idea, to double up on the plastic layers? Like just have two of the sheets, back to back. Would that double the insulation? My hope would be that I could keep peppers alive for a whole Canadian winter.
@philcrandlemire2 жыл бұрын
Hello Jon, if you can create an air gap between two layers of plastic then that would work but just putting one layer over another doesn't -- air is the insulation. Consider covering the plants at night with floating row covers -- that helps a lot. I am in Maine with weather not much different than certain parts of Canada and I would say it is impossible to have peppers, tomatoes, or anything that can not tolerate below freezing weather last through the winter. However, I've seen people doing creative things with homemade geothermal designs, passive solar and collecting heat in water barrels, huge compost plies that can lend passive heat to a greenhouse, and so on. I can say with certainty that I have had peppers and tomatoes last until Christmas in the greenhouse using row covers at night but other times we have had days and days of freezing weather that killed everything even in October -- very hard to predict the weather. All I can say is good luck and happy gardening.
@johnburk91572 жыл бұрын
Great idea I have a 6 foot tiller and made a similar attachment to my tiller that does 2 rows at a time
@HealthSupercharger2 жыл бұрын
So how wide are the 2 rows. Since you are starting from 6ft wide, do you make them 1.5ft wide each so you have 3ft of pathways and soil to move from to raise your beds as they are shaped.
@kevinrice48873 жыл бұрын
best bed maker i've seen on tonnes of videos!
@SirMickPb3 жыл бұрын
Thanks for sharing the design. I followed you example for the design but used left over 3.5x10" headers for extra weight and notched the sides to set up on the skids of the tiller. One of the sides kicked out after a couple hours of work. I think the lag bolts I used bent. Did you do anything underneath to hold those sides in at the bottom? I'm thinking about adding a piece of channel to the skid to then set that side in. Thoughts or suggestions?
@philcrandlemire3 жыл бұрын
Hi Jeff -- I am so happy to see that I am still inspiring folks to build their own hiller. I did nothing special other than what you saw in the video -- no skids on the frame. I think the ratchet straps take most of the pulling force when pulling it -- I have broken several. But my simple and basic hiller has lasted for years and years. Although now my farming much smaller than before and I don't hill my rows anymore except for a few that I just do with my Troybilt and that hiller attachment.
@DarrenMalin3 жыл бұрын
simple and clever , well done Sir :)
@smalltownMainer3 жыл бұрын
Jackman maine here. is your tractor the 750? if so its similar to my yanmar 226d.
@philcrandlemire3 жыл бұрын
Hi Jackman Maine -- YES JD 750 -- it's the best thing I ever bought! What do you guys grow up there?
@smalltownMainer3 жыл бұрын
not growing anything yet but would like to, have been looking at tillers.
@fredduncan16103 жыл бұрын
That is genius!! I wish I found this video a week ago, just planted yesterday. Will be working something up for next year! Thanks!
@skd54323 жыл бұрын
you have wonderful voice Phil....
@paulbraga44604 жыл бұрын
wonderful sir. mygreathanks. could use this in our place
@brokenarrow28354 жыл бұрын
kzbin.info/www/bejne/gauwaaxuiZqpf6M
@farmertyler80874 жыл бұрын
Have you considered plastic wrapped beds? Works so well for me for weed control down here in Massachusetts
@philcrandlemire4 жыл бұрын
Yes I have and used that method for a few years. Total awesome and but it total sucks when you need to remove them and disposal -- it's a wicked hassle. But no weeds -- ha.
@meyou-zx9ng4 жыл бұрын
Is that a reverse turn tiller
@philcrandlemire4 жыл бұрын
No
@johnsfarm93664 жыл бұрын
Great job!
@bobnewhart43184 жыл бұрын
The master of all inventions is necessity
@oldstudbuck35834 жыл бұрын
Does the acoustic guitar encourage organic gardening or is it the other way around? Do screaming electric guitars inspire gardening? Is there such a thing as inorganic gardening? Is the any good stand up Bill Burr style comedy on the “organic” gardening folks? Are “organic” gardeners allowed to drive big tire, highly modified diesel belching pickup trucks that were purchased with the profits from they’re “organic” gardening?
@philcrandlemire4 жыл бұрын
Yes music does, and I am surprised more people don't ask the same question. Depending on the crops you need to tune your music accordingly. Root crops like loud, heavy metal because it rocks the ground and loosens the soil so better root structure. And soft acoustical music for above ground crops -- and the more delicate crops I just hum lullabies until they sway in unison. Now take your sarcastic ass and go bother someone else because you are not as funny as you think you are!!!
@shelroutdoors4 жыл бұрын
Very clever! Nice job - this may be my next project. The snow is deep here in Minnesota and this may be next. Thank you for sharing.
@davidstewart8605 жыл бұрын
Fantastic! I will be building one. Thank you.
@barneybetelgeuse62735 жыл бұрын
Great job Phil works a treat necessity the mother of invention 😃👍
@tahraqapie47835 жыл бұрын
great work
@NaughtyGoatFarm5 жыл бұрын
Amazing! Thats some beautiful soft soil as well.
@68sweetnovember5 жыл бұрын
Excellent !!
@tahraqapie47835 жыл бұрын
very practical and clever
@brucewhite32975 жыл бұрын
Nice!
@sanaullahkhantarikhel89105 жыл бұрын
Will PVC pipe will work by bending?
@philcrandlemire5 жыл бұрын
I used 1" and 34" PVC Electrical Conduit and it bends and worked great. You will see many other people have used PVC electrical conduit for greenhouses -- it's perfect for a 12' wide greenhouse or hoop house I should say.
@sanaullahkhantarikhel89105 жыл бұрын
@@philcrandlemire appreciated answering to me.I shall try for that. Thanks a lot and keep it up.✌️
@richeyrich36555 жыл бұрын
We will visit soon , food look so good .
@3monet5935 жыл бұрын
Siembra a tus gatos y cuando se reproduzcan, me regalas uno blanco y otro negro. ¿Qué dices?
@philcrandlemire5 жыл бұрын
Lo siento, no hablo español y tampoco mis gatos.
@victoriabaker44005 жыл бұрын
Hey, Phil, just to let you know that we used your design and WOW what a thrill! I watched as many videos as I could of variations on this idea, but ultimately your video and the comments/answers gave us everything we needed to build it. The function of it is amazing. Beautiful idea, and thank you so much for sharing. I am interested in any other ideas and videos that you might feel like sharing. Thanks so much.
@philcrandlemire5 жыл бұрын
Thank you so much Victoria -- I just happened to come up with the idea and it's worked great for me too -- happy planting -- I was just working in my greenhouse and transplanting tomatoes -- can't wait to get them into the ground. You might like this one I did on an affordable greenhouse idea kzbin.info/www/bejne/q4uwh61rq6eUarc
@crazycoyote17385 жыл бұрын
Great practical solution!! The Rows looks delicious..
@holdenluce76885 жыл бұрын
Very informative, Thanks Phil!
@eupt45 жыл бұрын
wow, since i garden a larger plot since troy bilt days ( still have it). wanted to know how i could get similar results with my small tractor tiller. This is perfect, now to get the best hubbie in the world to make it for me!
@annpaul86076 жыл бұрын
What a great group! Thanks for sharing this. Good luck in the future.
@claysr1006 жыл бұрын
very Smart
@jonmacq66226 жыл бұрын
Fellow Maine farmer here.. great idea, Phil. Thank you for taking the time to share it.
@philcrandlemire6 жыл бұрын
Thank you -- glad you liked it.
@Northstar77336 жыл бұрын
was looking for greenhouse, not cats!
@philcrandlemire6 жыл бұрын
Then I guess you couldn't figure out the first part of the video. I don't know why you have to be purposely negative for no reason whatsoever -- you must be a very miserable person.
@twyggy6 жыл бұрын
That's genius! Thanks for sharing!
@philcrandlemire6 жыл бұрын
Glad you enjoyed it -- thank you.
@StoneyRidgeFarmer6 жыл бұрын
Thanks for the video...looking for a simple solution on our place for hilling up rows next year! Thanks again great idea great video!
@Bob631986 жыл бұрын
Well done sir, very economical and simple. I think I will try this with the corner of a board in the center of the drag bar for a "furrow" attachment. Thanks for the inspiration.
@philcrandlemire6 жыл бұрын
Hi Bob -- there are a lot of possibilities you do -- you could even make a board with 4 or 5 thin sticks nailed to it to make several furrows at once for planting things like lettuce, etc. Or even get more inventive and build a wheel with a dimple attachment to mark spacing in the row. Believe me this simple hiller has been very useful over the years. Happy farming!!!
@ananelsen10326 жыл бұрын
We've been looking into something like you've made. Do you have instructions that we can have or buy from you asap. you can contact us on [email protected] Thanks
@philcrandlemire6 жыл бұрын
Just read down to my previous comments -- it's a really simple design that you can make for virtually nothing with scrap lumber and some nails and lag screws. Happy gardening!
@goodingwashington60997 жыл бұрын
Thanks a bunch I am going to do just this coming spring
@cavemandancer7 жыл бұрын
Really great job, perfect build.
@FoxieShay7 жыл бұрын
Ah. Man. That makes me homesick for visiting them. I know them personally as Phil was my brothers principle
@cornwasher7 жыл бұрын
Brilliant design for raised beds. Like you I built beds with a Troybuilt Horse with the middle buster. This design is much better.
@buffalopatriot7 жыл бұрын
Beyond impressive.
@Jeffnixononline7 жыл бұрын
Phil, do you have any photos that we could take some visual directions from?
@philcrandlemire7 жыл бұрын
It's all in the video -- I built this in a couple of hours using scrap lumber -- 2X8X4 for the sides. I explained the best I could in the video -- it's pretty basic.
@cms148cs7 жыл бұрын
just wondering how big of tiller your running on that 750, I have a 750 that I want to put a tiller on and I'm toying with the notion on which width to buy a 48" or 60"
@philcrandlemire7 жыл бұрын
It's 48" -- truthfully, I don't think you could run a 60" tiller. I run mine on 3rd low and it goes great but really heavy ground I go down to 1 low. Sometimes I can run 1 high in light soil but that's not often and really too fast for tilling the soil very well. Good luck.
@petesmit337 жыл бұрын
You've obviously got a great depth/volume of soil there Phil which I am guessing helps a lot! I have made a quick shaper out of plywood and it does create a bed although much shallower than yours although I am wondering if mine is too short from Rotavator to the back of the shaper.....more trial and error no doubt!!! Thanks for the video most useful
@ralphjenkins99857 жыл бұрын
I've been watching this over the last several months. my son and I are going to try to build us one in a couple of weeks. got the wood, the straps, everything we need , so it should cost $00.00 also saw you built a green house, do I g that this fall, maybe 30x50. shouldn't cost no more than $200.00 thanks Phil, best thing I've seen yet
@philcrandlemire7 жыл бұрын
Thanks Ralph -- it's people like you that motivated me to share what little I've learned in my years of "playing" in the garden. Hopefully more to come. I'm planning a new website that will be coming soon called www.LastFarmStanding.org to help encourage others to become small commercial farms or hobby farms and keep our American heritage of farming alive.