Pro moto looks fun

A billion!

Oh yeah , the 6s tires 👍. How does it run ?

I have a granite and 4s outcast . Love them both . The granite is really upgraded . The 4s outcast seems pretty good as is . The inky thing I ll add is the M2c brace and already put the M2c pistons in and there is zero bounce . The pistons work good in the 4s shocks becasue there’s no diagpnram so it’s emulsion I think they call it and the difference is really noticeable on rebound with the 4s one bit tje Kraton 6s I could hardly tell until it lands and it’s smooth .

That's one bad ass RC! 🔥

What was the benefit of this build?

Or the garbage bins

Jump over the truck next time lol

Awesome you found the problem someone with a lathe needs to sell new shafts, after axial shafting everyone

Nice my friend👍😍

You know VP started as axial upgrades right?

How hard was it to mount this body

Looking forward to seeing more videos!!! All the best and good luck with growing your channel! Have you ever looked into using PromoSM!?? You could use it to promote your videos!!

Epic channel! I subbed!

Good video mate im waiting for my scx10 iii as we speak so looking at few videos to get tips for mine you've got an amazing truck there dude also you've got the same servos as what I have on my other crawler and will definitely be going on my scx10 awesome servos I haven't tried there micro servos so im glad you covered that because I have the 444 and I highly recommend

Wish I didn't think other people would think strange thoughts about me, when driving a crawler as a grown man. Then again guess I'm saving alot of money watching KZbin instead. ¯\(°_o)/¯

Looking forward to your thoughts on the build. I'm looking at buying a Game Changer (when they are back in stock).

I like the rig and video. Stay safe my friend.

i’d love to see an update on this rig!

Hey hope you can help just got the SCX gladiator and having faint ticking noise out of the box could they still be having this prob.or could it be gear mesh or or.hope you can help very frustrated

I'm watching a lot of your videos tonight for the first time because I just now subscribed to you and I also like that you have a beer in most of your videos and a more impressive beard than mine (not to be judged from my profile pic). That being said, I've done a lot of research on the SCX10-III mods and I wish I would have found your videos sooner. I never even thought about flipping the shocks to lower the weight, but it seems so obvious now. I also broke my upper panhard mount in the first 10 minutes of driving my newly built kit and that was quite frustrating. I upgraded to aluminum and also checked my steering linkage and end points very closely to keep it from happening again. So far, so good. I have been searching the internet without success to find someone else that wanted to remove the 2-speed completely instead of just locking it out, and you are the first I've found that did it. I was just doing that tonight. I want to go a bit farther and remove the extra slop by making preferably a different shaft and gear that locks in the single speed gear and eliminates all the other 2-speed slop, but at least a 3D printed piece that can lock it into place. I don't have a mill or lathe, so for now I'll be working on a 3D printed solution.

I run 3s on 2280kv castle creations slate motor and I feel like I have more than enough speed with my 11t pinion. I'm using a Savox servo, I think 1212, but I'm going off memory. I'm currently only running it on 6V, but that's about to change. I'm taking out my 2-speed and contemplating the dig. I'll probably keep it for now, but I have a BEC so I can run my steering servo on the full 7.4V and keep the dig servo on 6V. I love the idea of the high clearance links and that is on my list of potential upgrades, so thanks for the video.

Nicely done 👍

Is that stubby motor a good choice, I’m looking at motors for my scx10 3.

Nice vid bro! Thanks for sharing KUTGW! 🤙

Hi, what #tamiya Green?

Wicked crawling great looking trucks excellent job

Very nice crawl truck looks great

That looks sick

Nice job on the roof removal... I'll be doing that to mine. I assume you've fixed the clicking but if not it comes from two gears in your transmission being the wrong way around. One side of each gear has a rounded slot and the other a square, yours are the wrong way around.

Hyraxs definitely help the 10iii out. Nice video!

Great vid my brother 👍🏻💯

Should have used the VS4-10 ULTRA that way both rcs are running portals

Be careful I burnt out my 777 on 4s 14v max

Great video I think my fail point is the stock body have all the mods you have and more but stock body and fender wells....they are gone now thanks for the advice...

What’s your top speed in first gear?

I built mine the same as everyone since they are kits, but I don't have any clicking what-so-ever. Then to hear that some have had no luck with any of the fixes make me wonder if Axial's tooling or something is off, or maybe they were in too much of a hurry to get them out, It would be interesting to see if the clickers are limited to early units or if it is still an issue for the one just being sent out now. I does look like they were in a hurry anyways, poor unproofed instructions, poor fitment here and there with inner fenders and shafts and gears, and my peeve, hard to get to clips. These three thing are in my opinion quite lame on Axial's part, the inner fenders should clear the body better, the gears and shafts should fit way better (like DUH) and a system for body mounts should be far easier and faster, and proof read the flippin instruction before send them out. Axial just barely eked out a unit to get them back close to the top, but really didn't do anything to special or bring any clear advancements like Traxxas did. I don't think tape will last long enough, but does show that it works, I assume. What about a valve gap feeler gauge cut to length and curled around the shaft, they come in so many thicknesses, maybe that would last a suitable time. I also think the gear is what needs to be fixed, not the shaft, it still needs to fit into the bearings for proper support. The ID of both the bearings and gears should be the same with proper fitment. If I remember correctly the shaft fits fine in the bearing, so the gear is the odd man out. Thanks for the video, good job.

That SCX10iii looks great. Nice job on that build.

What size pinion are you running on the scx10.3?

Sweet dig action! Driving and keeping track of what your filming is tricky business.

My Trx4 would stomp this Rc

When your camera is mounted on your remote the harder the crawl the harder it is to get it on film at least for me lol i end up pointing at the ground

Great vid as always my rc brother 💯👊🏼 what rig is more capable? You've got the 10.3 dialed in

Just ordered a VS 410 pro, already have a Scx10iii, and a highly modified Enduro. great videos with the 410 and the scx10iii

Great vid my friend Looks tuff with the top chopped

Should do a video on getting the micro 99 servo work on the scx10 iii dig!!!

How did you get high clearance links for the scx10 iii? I can't find them on shafty's site.

Awesome run bro 👍🏻💯

What the colour ? Tamiya ps ??

Jeep looks way better looks more aggressive ready to hit the trails now nice 👍 job bro