thanks man, my rear backrest was trolling and i wanted to make sure i was pulling it apart right, not into too many pieces XD
@chinedumanekwe8658 күн бұрын
Legend
@lanikasardin82438 күн бұрын
This video was helpful, however any recommendations for installation?
@InstallersAssistant8 күн бұрын
@@lanikasardin8243 best bet would be to hop onto Facebook and ask the local community. Then check the reviews.
@ashleyroberts215814 күн бұрын
Looking to upgrade my speakers in the doors but not sure if i need the component or coaxial, and if theres a video on removing the tweeters in the columns that would be greatly appreciated 💪💪
@InstallersAssistant13 күн бұрын
Coaxial speakers are good for the rear, but you need components (splits) for the front. I don’t currently have a video on the tweeter removal, but from memory, it pops out from the top.
@ashleyroberts215813 күн бұрын
@ awesome, i ask as some component sets have crossovers and the tweeters are separate from the door speakers so wiring would be a no go, wondering if anyone has a similar build
@InstallersAssistant13 күн бұрын
If you have a tweeter crossover, you are in luck as the speaker wire at the tweeter is the same (including colours) as the door speaker. If the crossover is a mid/tweeter crossover, I find it easiest to put the crossover close to the radio and run a new tweeter wire.
@snufbox17 күн бұрын
Hey mate. Maybe change your title to “Rear Door Card Removal”? 🙌
@snufbox17 күн бұрын
Hey mate. Your title doesn’t reflect the content of your video. Maybe change it to “Door Card Removal”? 🙌
@MrLink8191Ай бұрын
Is there an adapter to go from the toyota plug to standard speaker clips? Or do you rewire the while thing?
@InstallersAssistantАй бұрын
Yes. aerpro.com/aps32 This is what you can use to make life easier.
@simonn1493Ай бұрын
Very helpful thank you! Question: do you know if the 2016 tablet style head unit can be swapped for a later model (2022) head unit? Are connections the same? Hoping this might be a slim possibility…. Cheers for the vids
@InstallersAssistantАй бұрын
@@simonn1493 not sure. You may have issues with the 2022 style plugs. They did change styles, but cannot remember what year.
@ProSnowboarder1994Ай бұрын
Good video thanks
@AJ_VFАй бұрын
Hey mate I’m swapping out the ssv suede material into a sv6 as the actual door cards on my sv6 are in much better condition how would I go about putting on? I’ve heat melted the suede off the other door cards
@InstallersAssistantАй бұрын
I have not yet had much success covering door cards. I would be more inclined to just swap the entire door card with the style you want.
@adamc8887Ай бұрын
Thank you for your video. My internal door handle on my front passenger door does not open the door, but the outside door handle does. I will take the door card off and see what is broken, likely I will have the same broken "blue" connector on the end of that steel cable that connects to the back of the internal door handle.
@mjhmareeАй бұрын
Hi. Looking at installing a FM booster on my radio (same as in the video) but not sure where the FM antenna cable/plug is. Can you please help me
@InstallersAssistantАй бұрын
@@mjhmaree you will need a reverse antenna adapter to convert from the usual antenna plug to the one used on your radio. From memory, the radio uses a “Fakra” style.
@DanielMcKinley-w4gАй бұрын
Thanks for the information!
@chrisbungarra10forrest-cl1roАй бұрын
usless
@jalam7588Ай бұрын
Good information thanks
@imnotcristo7479Ай бұрын
Hello, do you now how i can remove the low part of the panel??
@bisayadong2 ай бұрын
You should have a target trace..
@Wocc2 ай бұрын
Hey man did you wrap the door panel parts in carbon your self?
@joelng12 ай бұрын
May i know whats that tool called please? Theres already a dent in my dash from trying to pry it open and it didnt even get slightly loose!
@InstallersAssistant2 ай бұрын
Here is a link I found: www.ebay.com.au/itm/405224228053?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=wrf666jbsvm&sssrc=4429486&ssuid=6ZhmNSb0Sh2&var=&widget_ver=artemis&media=COPY
@onaurep1112 ай бұрын
By the way guys . The speakers on the dash are 2" 3/4 thanks for the likes :3
@mahmoudshams46682 ай бұрын
Good job 👍🏻
@twinreefs70252 ай бұрын
Is it different on the drivers side im having trouble??
@InstallersAssistant2 ай бұрын
No. The same technique for both sides. The top panels can be tough to pop out and sometimes the white clips stay behind. Sometimes I find it easier to remove the middle section first and sometimes not.
@PeterKraus-i7t3 ай бұрын
have a 2001 Toyota grace and need to take of the inside sliding door lock / handle
@bakosbl3 ай бұрын
Amazing, successfully took it off added 1212 for the code and is locked now completely. 😅
@JAVC19623 ай бұрын
Have you detached negative from the battery first?
@InstallersAssistant3 ай бұрын
@@JAVC1962 no. Hardly ever do. If the CAN is changing, or being coded, then yes. Or if dealing with airbags, the definitely!!
@JAVC19623 ай бұрын
@@InstallersAssistantok, but you disconnected the airbag sensor at 2:10 An American user warned that it can activate the passenger's airbag if the power is not turned off!? I'm going to install Android "radio" instead of Clarion radio/CD these days on my Juke Visia, but I'm concerned about that sensor, which won't go on the new frame. Is it possible to remove that sensor from the existing frame and leave it connected but hidden under the dashboard? Thank you
@InstallersAssistant3 ай бұрын
@@JAVC1962 from memory those plugs are only indicators and not actual sensors. So logically you could leave them plugged in behind the radio.
@biznet2222Jones3 ай бұрын
hey mate, after removing the headunit/radio...my 2009 sv6 went into lock out with the error code 'security data mismatch security lockout" absolutely nothing works inside vehicle except interior lights and stereo screen error message. Any help or tips to fix this?
@InstallersAssistant3 ай бұрын
Start the car. If this does not work, it may have to go to a dealer. The radios are VIN coded, but usually clear after starting.
@biznet2222Jones3 ай бұрын
@@InstallersAssistant Thanks for your response. It wont even turn over so booked it in to tow it to the dealer. Sounds like it is as you said in your comment. Cheers mate.
@gmholden633 ай бұрын
Awesome thanks for making these videos mate 👍👍 How does the factory head unit go with the upgraded speakers? Thats another thing i want to upgrade on mine
@InstallersAssistant3 ай бұрын
@@gmholden63 depending on the speaker you chose, they will sound awesome or will need an amplifier to really get the best. And changing the radio will give more features and more control over the sound.
@gmholden633 ай бұрын
@@InstallersAssistant too easy thanks man 👍
@user-jk7lv5kj6h3 ай бұрын
Hey, can i straight swap my mitshubishi single CD unit for the 6 stacker mitshubishi outlander unit?
@InstallersAssistant3 ай бұрын
Possibly. But I have not tried so I cannot say for sure.
@user-jk7lv5kj6h3 ай бұрын
@@InstallersAssistanti think I'll take a punt. I'll let you know if you like?
@user-jk7lv5kj6h3 ай бұрын
@@InstallersAssistant hey, I took a chance and bought a 6 stacker and it totally worked. Just a straight swap!
@InstallersAssistant3 ай бұрын
@@user-jk7lv5kj6hthat’s awesome! Good to know for future.
@andy86i3 ай бұрын
What was the white one you didn’t unplug at the end?
@InstallersAssistant3 ай бұрын
That’s the data cable between the radio/tape, and the seperate CD unit.
@AK-ho2lb4 ай бұрын
Thanks a lot , your video was very useful for me
@InstallersAssistant3 ай бұрын
Happy to help
@Superhello2204 ай бұрын
thanks my dash is soft as butter with random pools of goo and the hazard/vents are already cracked all over from age so this definitely saved me from destroying it
@InstallersAssistant3 ай бұрын
Very common on ALL of this range of vehicles. Just did another one today actually..... same technique.
@riyan40824 ай бұрын
The clip below the hazard light stays stuck do I just pull it out?
@omarhamzah98654 ай бұрын
Just fixed my cruise control on my 08 Sportivo aurion. Cheers for the great video.
@coreyryan8644 ай бұрын
Hi Marty is it the same process on the drivers side as well
@InstallersAssistant4 ай бұрын
@@coreyryan864 typically vehicles are practically identical between the two doors. The only exception is usually more plugs on the drivers side for things like mirror control and master window switches.
@coreyryan8644 ай бұрын
@@InstallersAssistant thank you
@MichaelSeman-o1q4 ай бұрын
The remote mirror plug came apart easy for you. I have done a few of these, and it is a pig of a thing.
@InstallersAssistant4 ай бұрын
I have also done a few in my time. Maybe I have a magic touch. lol
@nicknikolovski30114 ай бұрын
Veriy cliyar
@xrpark62114 ай бұрын
Great video! Straight forward and to the point. Thanks!
@platypusysniffer4 ай бұрын
rattle rattle 😂 thank you! Made not breaking thinks by accident alot easier!
@InstallersAssistant4 ай бұрын
Happy to help
@joelcollison64605 ай бұрын
do you have a link to the hook you used? or a name of it
Have you ever tried getting to the screen on the mk8 golf/mk 5 Caddy? I have tried myself but in absolute fear of breaking something I stopped. Trying to install the focal impulse amp in to my mk 5 Caddy!
@scott-kt6ry5 ай бұрын
Took the door apart on my lx 470 yesterday to fix the window. Found this very helpful. Thank you!
@InstallersAssistant5 ай бұрын
Awesome. Happy to be of help.
@ManjotSingh-go7bu5 ай бұрын
that's very helpful mate! Thanks
@InstallersAssistant5 ай бұрын
No worries.:)
@MichaelScott-cn4pe5 ай бұрын
Sweet and right to the point you the man!!!
@InstallersAssistant5 ай бұрын
@@MichaelScott-cn4pe thanks for the feedback. Happy to be of help.
@tomgrimreaper41015 ай бұрын
Hey mate I did mine and I have no sound coming from the speakers
@InstallersAssistant5 ай бұрын
@@tomgrimreaper4101 strange. Did you use all new parts?
@justindavies47015 ай бұрын
Hi. Great video. Thanks. I'm also trying to work out how the antenna cable gets converted to a standard connection? Any ideas?
@InstallersAssistant5 ай бұрын
@@justindavies4701 yes actually. You will need an antenna adaptor. aerpro.com/apa69?src=api
@josephbelen81125 ай бұрын
Thank you this really helped,
@DavidJRide5 ай бұрын
I've done the same in the past. Found it on one of the forums. But then I put epoxy over it to make sure it's stayed in place and didn't break the plastic away because the spring is much stronger in that position.
@InstallersAssistant5 ай бұрын
@@DavidJRide makes sense. Will see how long this lasts and maybe do that trick next time. Thanks for the info.
@beyond_the_infinite20985 ай бұрын
Good info but please change those hideous seat covers.
@InstallersAssistant5 ай бұрын
@@beyond_the_infinite2098 lol. I have no control over customers choice in decor. Hahahaha.
@tshinotu1455 ай бұрын
Appreciate this video is was very helpful! Sucks the radios on these were so bad.
@InstallersAssistant5 ай бұрын
Glad it was useful. Yeah, OEM radios leave a lot to be desired.
@GMans-World6 ай бұрын
I have the same car, can I replace that stereo with the later (Oct on) model stereo, plug and play compatible ?? thanks
@InstallersAssistant6 ай бұрын
Sometimes yes. If you pull out the OEM one and compare the plugs on the back, you should know soon enough.