Man I worked with HSM and SW before and now I have to work with Visi and those Feature crap again... I am so frustrated. I want my HSM back 😥
@wolfrodrigo887 ай бұрын
When using Inventor CAM, how can I represent or visualize the machine? Is there an option where I can load machine models that are displayed or should I simply model it in CAD?
@MrJermbob7 ай бұрын
Just want to say i followed this step for step with my own drawing and have had great success. Thank you so much for this video. You have opened a new world to my mind. Love from New Zealand.
@DonMaloy7 ай бұрын
Would be great to offer some more training on this topic. I maintain an Autodesk Subscription just to use HSMWorks addin for Solidworks. If there are paid versions of training available that would be great.
@jeremerogers75816 ай бұрын
Unfortunately Autodesk refuses to support HSMworks to any useful degree.
@levikab9 ай бұрын
I ❤it.
@kuei121510 ай бұрын
What endmill? How many flutes? I'm guessing that if they leave out critical information, it cannot be done. Here is what we need: Tool info spfm ipr doc rdoc ramp angle ramp radius Why is this so hard?
@Chatran200810 ай бұрын
How can print the Setup Sheet with the Operations image in Operation documents?
@Chatran200810 ай бұрын
How do I add an Image to Inventor CAM and HSMWorks Setup Sheets show the image in each Operation toolpath with the image
@Chatran200810 ай бұрын
How can print the Setup Sheet with the Operations image in Operation documents?
@RixtronixLAB11 ай бұрын
Cool info, well done, thanks for sharing :)
@robvaughan173211 ай бұрын
Brilliant Thank you so much.
@Wingdinger Жыл бұрын
Fantastic video, I’m really looking forward to trying HSMWorks
@tazanteflight8670 Жыл бұрын
All these great videos are totally worthless now, because the Fusion360 UI has changed so much. There is no "use g28" selection anymore.....
@RebeccaSlater-mv9jw Жыл бұрын
How were you able to configure your machine during the job set up? (Choosing what machine you're using and then actually setting up that machine in HSM?) Any tips for setting up a lathe in HSM with live tooling as well?
@RebeccaSlater-mv9jw Жыл бұрын
How were you able to configure your machine during the job set up? (Choosing what machine you're using and then actually setting up that machine in HSM?) Any tips for setting up a lathe in HSM with live tooling as well?
@RebeccaSlater-mv9jw Жыл бұрын
How were you able to configure your machine during the job set up? (Choosing what machine you're using and then actually setting up that machine in HSM?) Any tips for setting up a lathe in HSM with live tooling as well?
@seimela Жыл бұрын
There's no video explaining heights of internal turning
@alexbluhm9320 Жыл бұрын
Fantastic video! Thank you!
@benoosthoek1745 Жыл бұрын
thanks!
@passenger67352 жыл бұрын
Absolutely brilliant. I have been using the CAM part of Inventors (wrongly) for some time now. I'm hoping you have done one on turning though.
@samh85862 жыл бұрын
Which is stronger and harder 6061 or A356
@joshnewton3622 жыл бұрын
How do we get multiple setup pictures at the top for the initial work coordinates. It seems we need more pictures to show the work offset location (ie where to touch off on the part). What you show, (a picture fore each tool's operation) isn't necessary in most situations.
@metal-zl3sw2 жыл бұрын
Today was my first day using Inventor CAM software. I was super confused on how to do some of these things and had no one else that knew how to use it or machine. This videos broke it down and simplified the process. Great video!
@johntez62312 жыл бұрын
Very educating
@billschnoebelen402 жыл бұрын
Protip: Ingnore the video. Draw a sketch of what you want to machine. Make a planer surface from sketch. Select surface as your model.
@shansultan19952 жыл бұрын
amazing ❤️
@alirezashamsi75342 жыл бұрын
Hi I want to learn cnc programming What should I do?
@JackF992 жыл бұрын
I got confused by your explanation of the bottom height offset. I understand the top face of the model is the bottom height of your facing cut but how/why does that have anything to do with defining a stay-out zone down at the soft jaws?
@philipcalhoun85562 жыл бұрын
How can I get a copy of this model ??
@sharifnazari37562 жыл бұрын
Very help full🙈
@corasalin67302 жыл бұрын
inneficient to a medium complex part....
@Max_Marz2 жыл бұрын
the handles are based on the tool orientation *mindblown*
@crazylarry80423 жыл бұрын
One student in the room !!!! America this is a Fking problem!!!!!! We need that room full all the time !!! In China that room would have students packed in their like sardines 7 days a week 365 a year learning this stuff !!!! We got one student…….. one …..fking 1
@oswurth8774 Жыл бұрын
Chill
@THISCLOWN813 жыл бұрын
3:55
@ReyBanYAHUAH3 жыл бұрын
Always remember to repent of your sins (sin is transgression of YAHUAH’S LAW: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy) And Have Belief On Yahusha The Messiah. HE Died and Rose three days later so that you can be forgiven of your sins! HE Loves you! Come to HIM!
@SpanishLindo3 жыл бұрын
Thanks 😊
@foosaful3 жыл бұрын
going to make come heavy chips on our DMC v63. Its the only program, I could find postproc for sinumeric
@vineethcaddcentre70913 жыл бұрын
how can i download the HSM utility
@flawns3 жыл бұрын
NICE!! where can I download these slides?
@akshitsingla4213 жыл бұрын
I want join you sir im a vmc operator
@brucewilliams62923 жыл бұрын
This has been an excellent video on G-code programming. I sincerely appreciate the way you organized the information. Well done.
@mavenequipments68253 жыл бұрын
thanks
@mytubehkjt3 жыл бұрын
So as of 2021 these Vertigo Technologies clowns are now in liquidation. I've had one of their machines for only 18 months. Whilst the hardware is good the electronic interface has been a constant problem. After multiple promises of a fix I am very angry that they have left us all in the lurch. Typical of this kitchen table crowd.
@cedricwolff38033 жыл бұрын
Is there the possibility of using the Heidenhain sample -version:43262- available at the Autodesk website on a CNC millingmachine which uses the Heidenhain TNC320 or TNC405?
@LS2MGB3 жыл бұрын
Great feature, very useful.
@rybread57183 жыл бұрын
Thank you!
@jagankandukuri60393 жыл бұрын
very nice info. thanks
@corasalin67303 жыл бұрын
great presentation, but how about the errors that inventor and also Fusion seem to not be able to solve them in the right way like "Empty Toolpath" , an error that appears for many reasons and default parameters. Also rest machinning air cuts that should strictly depend on ignore cusps parameter, but it isn't in many cases until you constrain it in a boundary...., make no sense. Sometimes the only way to make a good rest machinning op is to increase stock to leave significantly wich is really bad, leaveing to much material in corners for finishing...
@jagankandukuri60393 жыл бұрын
Hi can you send possible solid model files for your inventor cam videos to [email protected] for practice. Thanks