Just wondered what the crush rating is on those CROCS ?
@Cummins7136 күн бұрын
@@malcolmmeade6737 safety Crocs !!!!!😂😂😂
@Ansud198111 күн бұрын
How much u selling the 3500 for?
@Cummins71311 күн бұрын
@@Ansud1981 when it's all done I'm going to ask around 18
@Ansud198111 күн бұрын
@@Cummins713 definitely not bad u definitely built it rite
@wkjeeping905322 күн бұрын
Mobil 1 oil filters are better then both that you suggested. That trq brand of parts are garbage.
@Cummins71318 күн бұрын
@@wkjeeping9053 just my preference
@jamiecanter416624 күн бұрын
What was wrong with the old engine
@Cummins71324 күн бұрын
@@jamiecanter4166 it was a 53 block cracked down the side
@jamiecanter416623 күн бұрын
Thanks my son has a 53 block it was cracked I welded it so far it's still doing good I have the same block had it for 16 years no problems with it
@Cummins71323 күн бұрын
@@jamiecanter4166 I heard clipping 2 fins on the water pump also helps
@jamiecanter416623 күн бұрын
Thanks I might give that a try to
@lyndonhamby743225 күн бұрын
That ole 24 valve should last dam near forever 👍🏻💪🏻🇺🇸
@Cummins71325 күн бұрын
@@lyndonhamby7432 thanks for watching!
@lyndonhamby743224 күн бұрын
@@Cummins713 👍🏻👍🏻
@moyers68026 күн бұрын
Super excited to see what’s next! Truck is gonna look good when it’s finished. Need to find me a project soon before they get harder to find.
@scottcroney170326 күн бұрын
Hey man new subscriber here, i love this project and id like to do one similar. I have a 1999 dodge ram 1500 I'd like to bodyswap onto a 3500 dually drivetrain
@muzzy24v8927 күн бұрын
24 valve only takes 10 quarts in engine 1 quart in filter you dumped 12 quarts plus whatever you already had in it. looks like the wrong dipstick
@Cummins71327 күн бұрын
@@muzzy24v89 1st jug wasn't full
@bigmurph144723 күн бұрын
I always put 12qts in my 12v won't hurt it. She just roll over to 500000miles.
@muzzy24v8923 күн бұрын
@bigmurph1447 I just go by the book and it calls for 11 quarts which puts it exactly on the line on dipstick.
@themattsweeney17 күн бұрын
@@bigmurph1447I just turned over 100,000 last month! In mine ! 12v
@DonaldBurner-ib6riАй бұрын
The 6.0 is the junk
@Cummins713Ай бұрын
I agree 99% of the time but this thing actually runs
@nventures1672Ай бұрын
Looks to me like it’s driving better than the dodge sir 🤔
@tylerwallace6085Ай бұрын
I believe it’s a 6.0 it said all or nothing 😂
@Cummins713Ай бұрын
Love this 6.0
@twiztid664Ай бұрын
Only junk because you wrecked it. Was a good vehicle before hand.
@Cummins713Ай бұрын
Was junk when I got it rusted beyond repair
@Hunterrnorris3 ай бұрын
“I’m not saying it’s a POS, but It’s a 2nd gen, so it is a POS” . I definitely understand where you’re coming from haha
@nephron99243 ай бұрын
Whoa! What's the specs on this beast?!
@Cummins7133 ай бұрын
Mild built 6.7/ nv4500 I'm going to do a full video on it soon subscribe to check it out
@7.3PSDA23 ай бұрын
i have a 09 f550 with a 03 5.9 common rail in it. best decision every made.
@Cummins7133 ай бұрын
Absolutely!
@7.3PSDA23 ай бұрын
@@Cummins713 and my 90 has a 12v pump. in it
@Cummins7133 ай бұрын
@@7.3PSDA2 can't go wrong there!
@scatpack013 ай бұрын
I have a 98 dually I'm fixing as I go.
@lucasmancini74153 ай бұрын
Good video. Keep up the good work
@Cummins7133 ай бұрын
Appreciate it
@jeepanimal29433 ай бұрын
So far so Good> Those 53 blocks ae saveable if not already cracked, (And if they are, I've heard of luck with a product called "Irontite.") Sammy @ V-Belt and Son has the fix on one of his videos, I believe just cutting off 3 out of 6 or 9 blades in the water pump to reduce flow pressure, don't quote me please. I'm big on oven cleaner for engines and engine bays for cleaning grease and grime, stronger, deeper clean. But, with the dogs there, I'm guessing your options are limited. Well, I'm just gonna watch video two right now! Nice work.
@Cummins7133 ай бұрын
Thank you so much for watching...the block was already cracked when I bought the truck and resale value is a lot more if it's not a 53 block watch part 3 I have the new engine all buttoned up!
@zercoxi48254 ай бұрын
Make a video how to do a burnout
@fishingwithsawyer9613Ай бұрын
You just hold down the brake and the gas at the same time
@b-genspinster78954 ай бұрын
ah the fatal 53. It’ll be just fine. Don’t pull heavy loads in the Rockies and let her cool off for a while if you can’t resist doing so….
@Cummins7134 ай бұрын
It was already cracked when I got it
@ronaldduwaynebrown80714 ай бұрын
Always liked the sport trucks
@Cummins7134 ай бұрын
Love them
@codypregler71154 ай бұрын
Where is the coal at?
@Cummins7134 ай бұрын
Lost it 🤷
@goldysgarage1895 ай бұрын
Cummins makes a great mill, it’s that crap dodge truck wrapped around it thats the problem
@Cummins7135 ай бұрын
Absolutely thats why they need rebuilt every 10 years
@charleshotaling11195 ай бұрын
Awesome video have you tried super clean for grease and oil removal on the engine if not give it a try I use it on our farm machinery
@Cummins7135 ай бұрын
Ive tried it just doesn't seem as good as orange crush degreaser
@codypregler71155 ай бұрын
Such a sweet truck!
@armoredcar15 ай бұрын
I’m confused, isn’t the rear a solid axle on a ford truck? This looks independent. As far as I know the new lighting has independent suspension.
@Cummins7135 ай бұрын
It's a little Ford maverick
@michaelshaffer93055 ай бұрын
😂🤣
@CustomCarnageFabShop5 ай бұрын
Post more Shorts on youtube! You can even take your existing video and break it into smaller parts and post them 👍
@Cummins7135 ай бұрын
Thanks!
@zercoxi48255 ай бұрын
can you make a video how to do a burnout in a 2nd gen.
@Sunde535 ай бұрын
no
@zercoxi48255 ай бұрын
keep up the content!!!
@mattgarrett71265 жыл бұрын
Details under the hood?!?
@Cummins7135 жыл бұрын
Matt Garrett ppump 24v
@mattgarrett71265 жыл бұрын
Yes I figured that but what are the pump specs..turbo size...injector size? Thanks
@rileyholt82006 жыл бұрын
What is the setup?
@davidsmith72848 жыл бұрын
mods?
@Cummins7138 жыл бұрын
only 448 886 its a p pump with a s400
@Cummins7138 жыл бұрын
only 448 886 its a p pump with a s400
@Cummins7138 жыл бұрын
only 448 886 its a p pump with a s400
@millville89 жыл бұрын
what did your dyno numbers end up being? I have a 92w250, hx35, industrial injection fuel pin, 366 gov. spring. 4" straight pipe and pump tuning. I have a brand new HE300VE that I'm planning on having done in a couple weeks. Running 35lbs of boost now hoping for 10 to 15lbs of more boost with the he300ve. My first dyno run is coming up June 20th. Area Diesel, Pleasant Hill, Iowa. I cant wait to see what my numbers are.