Thanks for the tips and repair video.

Pubblicità e basta.

I really thought they ripped me off! Thank you so much, this video was absolutely useful for me

Thanks for helping fix out Lego Avengers Tower light kit!

Very well, like always. Where did you get the little scale?

what is the height of this microwave's door? the total height is 343, I know, but what about just its door?

Hello sir I enjoyed your video review on this wonderful nostalgic Sony Walkman. I have the same here but since today the speed of the walkman is going double. Also cue and rewind goes very fast now. I used an universal adapter for the DC 6V electricity input and afterwards i had this problem of speed of the tape cassette. Mine is in very good condition, i used it for recording live piano recordings in my music conservatory education. Could you please give me some tip or advice for this pitiful problem? Much thanks. Ilias

I was expecting to see a fake one also

Excellent video

Good trick to put back the cap. I assume bran has made this stuff to make a big money as mine gets low leveled after a month then useless.

Can i put aa 1.5 v battery rechargeable inside the gillette styler

I bought fake ones FKN CROOKS 😡

Thank you

Hi which anker /baseus /ugreen charger can charge two s24 ultras at 45w/5A with Super fast charging 2.0 at same times with two usb-c ports in one device? Anker support team told me anker 737 120w A2148 can do it.

Sounds good!

It's interesting this walkman has too many capacitors.

Ok, I posted this on the other KZbin video that gets some views too: reposting here to make it easier for people as well...I didn't find this particular video that helpful but anyway. A few notes that may be useful: UNPLUG THE TOASTER. Geez, like this wouldn’t be obvious, but ok, there we are. There are three Phillips head screws PH#1 underneath the toaster that have to be loosened to remove the shell that contains the failed part (the knob side) Then you have to release the cleaning catches on the underside of the toaster, flip down the glass sides like you were going to clean it, and take out two Torx #10 screws hidden in the frame sides that hold the end shell on (specialty screwdriver head). Then you need to slide the knob-side shell of the toaster upward with the knob and its lever stopping you from removing it entirely. If you look up into the slid-up shell with a flashlight at that point, you will see that the toaster knob is inserted into a vertical socket. A plastic latch holds the metal shaft for the knob into that socket. If you take a thin screwdriver you can pry the slot latch away just enough to release it and pull the knob and its stem out without any issue and without breaking the plastic retention latch. WIth the knob released, take entire shell off. You will see the Printed Circuit Board (PCB) with the solenoid that retains the toaster knob and holds your bread down-and that’s usually what has failed; the wires in the solenoid have corroded/broken. Use wire nippers to cut the two plastic zip ties holding the wire bundles BUT NOT THE WIRES to the printed circuit board. Unscrew the one Phillips head screw and the plastic hold down securing the printed circuit board and slide the printed circuit board out. You can then either attempt to repair the single solenoid as outlined in some other videos or you can buy the replacement printed circuit board and do a wholesale replacement. Prices for the entire new circuit boards from, oddly, British suppliers seem to range between $15 and $45 USD-- I don’t understand the difference in vendors ---and it takes 5 to 7 days of shipping. My solenoid just wouldn't allow itself to be repaired in the part evening I allocated to this, so--I ordered a new PCB. If you get a whole new circuit board, then you need to disconnect the multi-wired white plug from the board, then de-solder FOUR wires from the old PCB while you solder them sequentially back into the replacement PCB. Don't screw that up! I did them one at a time. Once you have the new circuit board soldered to those four wires, plug it in to the white wire harness plug that you carefully took off the old board, put the whole thing back together again with the two small zip ties that you clipped off. Re-attach the small Phillips screw and the plastic hold down that stabilizes the PCB to the toaster shell, then slide the shell back back on. Carefully put the lever back into the slot until the "click" tells you that the plastic latch is engaged on its metal shaft, attach the three Phillips screws underneath, and screw in the two Torx screws in the frame on either side of the glass flip out windows--and boom---you're back to toast.

the s7 keyboard is not called slim keyboard

Hi, dear author, would you like to try our company's docking station?😀

üzerine basmana gerek yok çevirmen yeterli.

Loved it! Would love to buy one, one day

How we can connect them to this app u didn't tell us the name of this app

My Remote is not Connected with Fan .!

How to Function Remote Control with Fan

Best unintentional ASMR plus helpful

Does 45 w charger makes buzzing sound

Hi sir Hom i have a Sony Walkman Wm-F101 the problem is the 2 door screws is missing do you know the size of it and also for the back case screw? Ty

Thank you for posting this video. I had bought replacement tips on eBay, when the hummingbird stopped vibrating & I was ready to throw it away, when it stopped. I didn’t know how to open it up; I didn’t know it had a replaceable battery. Now all I have to do is find my AAA battery. I paid $10. for it & now you are right it is selling for close to $100. & up! I’m surprised that Oral B doesn’t remake it. I LOVE my Hummingbird. Keep it, it is good for your gums; it is gentle & the vibration breaks up the colonies of Bacteria that hide under the gums. I am a dental hygienist with over 30 years in practice from the world’s # 1 rated University of Michigan dental school USA & although I love my Hummingbird flosser, I wouldn’t pay the exorbitant prices that are out there now!

worked #lifehack

What about the color differences like white one

Great work

Rubber rings on the capstans. Avoid these models !!!

Hi very interesting video 📹 😊 I just bought this cassette player all most new in box with remote control and headphones in mint condition only I paid £12 For it...radio 📻 works and cassette player don't work I think the belt is gone ?? I will order new belt and change it and see if it works thanks for the video 📹

Thank you! It worked for my Neewer Ring Light that had a remote that stopped working!

Awesome man! I bought this walkman new back in 1998 when I was working part time at university. Think I paid £70 back then which was a lot of money and it was in the sale ! I still have the original box, manual, remote, battery, pouch etc. However, it doesn't play anymore..I believe the belts need replacing. Is this easy to do myself? Cheers!

You selling Mc’Lies my ish still blinking 😒

Xhxhjxjix

Can you do one opening up the particles. I think the fake one I got have white things. And the black filter part seems to be charcoal because if I wrap it onto the floor it will be black

Hi, I'm in the US and Im also having no luck finding a battery pack. If anyone has found it recently, pretty please drop a link and tag me! Tysvm!

Total waste of my time. Nothing demonstrated.

Is worked halfway. The on off buttons still don't work but i can now turn the light on with the white light button and turn it off wirh the blue light button, which is better than before so 🤷🏻‍♀️🤣

Thanks

You made a video about a tablet/ipad holder but didn't think to actually have a tablet in the video and demonstrate why someone would want to buy this??

Hello, do you offer Walkman repair services in the UK?

Is it compatible with s75q?

What are the limitations?

Need some advice)

Do you used plastic card to fix battery cover?

Mine won’t turn off

Thanks. I was given this device and I didn’t know what to do with it, now I know))