AudioEnVision

Пікірлер

@TheElectricPie1 2 күн бұрын

And it is safe to unscrew this with the power on?

@ericilkwatson5557 Ай бұрын

Thank you, but how do you connect the cables in the central location where they come in the house?

@elty69 Ай бұрын

The Orange pair is for line 2 sir….

@_mark77 Ай бұрын

Can you show the step with the wires in slower please

@_mark77 Ай бұрын

How do I know which standard my house has?

@hannahwells9397 2 ай бұрын

When you called the keystone an insert (simplified term) I was afraid you were going to use the screwdriver as a punch tool

@BS1071M 2 ай бұрын

How do you take it OFF ONCE INSTALLED??

@islamahmed4561 4 ай бұрын

It works with wire or without

@jonathanjohn7669 5 ай бұрын

Before I start my project I need to find a stripper first, also a stripper pole with that... Great video 🫡 doing my project this weekend.

@mrBDeye 5 ай бұрын

What if the phone jacks are connected to standard four wire phone cable?

@JACK-wh6jl 6 ай бұрын

🤬NOT A "PHONE-JACK !🤬TOTALLY MISLEADING ! SHAME-ON-YOU !!!

@mradaChris 6 ай бұрын

I used a connector like you had and my network never worked. I didn't know which is A or B on the other end of the cable (which goes to a network hub). So I got a cable with screw posts, however, if there is a A-B difference, which wires are involved? I followed the directions and it seems my network still isn't being recognized.

@mikehomesley2016 6 ай бұрын

Would I need to do anything at the service box outside or if I just replace the rj11 with rj45 in 2 rooms will it be live. Trying to create a lan just frim my master bedroom to my sons room for his gaming computer but only have rj11 terminals

@area51xi 10 ай бұрын

How do you know if your house is wired with Cat 5? I found a wall plate in my home office and there's a blue cable that looks like Cat 5. How you know if it's 5 or 5e? I have no idea where that wire is coming from.

@nickthegazerofsouls Ай бұрын

Just look at the print on the cable, mine says 5e. If yours only says 5 it's only 5

@GoAccessControl 10 ай бұрын

What is the purpose of doing this? How do you get internet from here?

@lieutenant_arrow7009 11 ай бұрын

it looks slow because the rotations per sercond almost perfectly matches the framerate that the video was taken in

@marcbenoit6974 11 ай бұрын

Links to the items used would be awesome

@Narikeljinjira Жыл бұрын

It cabt write CDs bro

@kakashi99908 Жыл бұрын

These were generally for phone providers not for use for DIY networking which means they are wired to some central location that goes to the telecom network. Even if you somehow manage to get your LAN to that central point do you want all ports on the same network anyway? Probably not.. better off just paying someone a buck and a half to do a proper drop.

@XWhiteWinter 9 ай бұрын

All ports on same network?! What exactly do you mean.

@bryansghost 8 ай бұрын

this dude is that "someone" who didnt get paid a buck and a half because people are DIYing it

@idahogiants Жыл бұрын

This is a great option in most homes to convert to RJ45 port however finding out where it terminates is the real challenge. Often it will be outside in a phone box on an exterior wall. A ethernet network toner would be a great tool to locate the path of the cabling so it can be determined where the other end of the cable can be terminated closest to the router location.

@mobmob5944 4 ай бұрын

Just use a multimeter on Continuity and extension plug(or long wires) . Use the pins on the extension plug as a extension for your multimeter probes . Stick one end of the wire that you are trying to identify into one of the holes on the plug then take the other end of the extension plug wherever there are data cables and then stick one of the multimeter probes into the same hole of the extension plug but oppisite side , then with the other probe touch the wires one at a time till you hear a beep or have continuity

@_christos...christos_ Жыл бұрын

Power DCL ONline Telephony Service WLAN WPS

@residentrump3271 Жыл бұрын

Anyone know how to replace a regular phone jack with a dual setup with a phone/broadband jacks? The moron who installed our AT@T gateway placed it in the far corner of the house where the signal is all but useless in most of the area. Thanks for any info offered 👍

@billybobleeswagger4466 Жыл бұрын

Does it matter which jack receives the router, or that that router plugs into? Is there any "main jack" or something that has to be where the router plugs into?

@jwong7279 Жыл бұрын

lucky you. i only got 3 pairs line without brown pair. I can only make cat 3 cable with 10mb/s

@Beansisbestlol Жыл бұрын

Man that’s still better than my wifi

@ryanjofre Жыл бұрын

Great personality bro. Box cutters scare me more than high voltage/amperage electricity. It records on USB drives in MP3 format. Considering how dirt cheap flash memory drives are today, you could record an incredibly library of music on one little thumb drive in the highest MP3 quality of 320Kbps! I listened to one today, wasn’t impressed or disappointed. I didn’t have great headphones though.

@peupeuguy310 Жыл бұрын

How do we know the standard?

@azaddinaghribi1663 Жыл бұрын

tank you

@aslarsen4193 Жыл бұрын

Thank you so much! I just followed your instructions and did it by myself. AND IT WORKED!! I’m so proud❤

@adminmovie Жыл бұрын

that was clearly not stripper

@georgemelendrez4530 Жыл бұрын

Sorry if this is a dumb question but once I do this how do I connect it to my router. For example, I want to give my house ethernet access. There are multipel phone jacks throughout the house. Do i just need to change the wiring on 1 phone jack, connect it to the router and then my house has ethernet?

@kyriakosmaridakis8139 Жыл бұрын

I am wondering the same

@davidhaynes9580 5 ай бұрын

You buy a network switch, plug that into your router and then each rj45 into the switch ports

@aidanoneil4853 Жыл бұрын

is there a link to this kit?

@shaydartez6543 2 жыл бұрын

How do we tie into our established home network to add another router and more ethernet ports?

@devinmyles2887 Жыл бұрын

What you'll need is a switch or a mesh network such as eero and add a switch to it.

@J3LUNT 2 жыл бұрын

Sonos says to use the wall anchors for drywall as well as concrete and brick. Why do you say not to for drywall?? I think I’ll use them. Otherwise great vid!

@georgeshowalter8011 2 жыл бұрын

Sounds crazy could this bracket be used to install it to tv bracket above 32" tv? Not to wall.

@kellyhusmann3961 2 жыл бұрын

looking for someone to come do this in my grandma's mobile home (rialto CA), they remodeled and covered her ethernet port so now there is no way to install a router

@sydneysargeant5173 2 жыл бұрын

Is the Connect essentially the same as the Bluesound Node? Can get a used Connect for a fraction of the price or brand new Node - what’s your recommendation?

@topnotchnationnetworks6352 2 жыл бұрын

kzbin.info/www/bejne/nJq7p2triLR3p5Y fixing a jack at target

@hi-rez3552 2 жыл бұрын

Does this bracket trigger a reduction in bass output like the Arc bracket does?

@AdriRPerez 2 жыл бұрын

what if my house doesnt have cat5e or cat5 routed through it already, i have a landline jack, but it does not look like the cable in the video

@toddcee 2 жыл бұрын

Can you send links of the equipment (insert, etc) uswd

@julianhanopol7603 2 жыл бұрын

how do i find the other end of that ethernet cable? I have multiple around my house. I feel like there should be a main somewhere feeding each jack in my home.

@TheStereoField 2 жыл бұрын

Yeah i’m trying to figure out the same. I have 4-5 phone jacks throughout my house, with cat5e cables feeding them. Then I have one un-terminated cat5e that ends in an exterior box that otherwise has only coax connectors in it. So, how is that exterior cable connected to all the phone jacks in my house? Are they all spliced together or something? I would have thought you’d need a switch of some sort to make them all functional.

@kevs1768 2 жыл бұрын

@@TheStereoField were u able to figure this out?

@TheStereoField 2 жыл бұрын

@@kevs1768 yes, but not in a good way. They are all daisy-chained together, which works for phone lines, but not networking. I ended up getting a few MoCA adapters to use my coax wiring instead, since running ethernet in my house would be a major pain. The MoCA setup has been working great though

@amanduswestin9211 Жыл бұрын

@@TheStereoField Or you could be spicy and use it like a bus-net, which was the case most of the time when Ethernet was new, that's why it's so good at collision-detection!

@mr.b4444 2 жыл бұрын

Actually Vinyl is old school. CDa nd CD players are still relevant. Problem is that this particular player suffers from a poor tray mechanism that fails on many. I've had this unit for 3 years now and although it sounds good, it now has issues keeping the tray in so it can read a CD.

@angelsantana6527 2 жыл бұрын

You talk to much

@nevinrazzano6997 2 жыл бұрын

My house has 2 ethernet wires in each port and they jump to each room. Could I put both wires in the RJ45 port?

@BattlefrontNow 2 жыл бұрын

What do you mean get the other end of the line ?

@timothyripley4175 Жыл бұрын

He showed you how to do 1 of 2 ends, the other end is done the same way so he didnt show you him doing it

@davec8153 2 жыл бұрын

Wow, I just stumbled onto this video, and I agree with the other poster. Clear, concise and helpful.

@SkwirlSniper 2 жыл бұрын

Okay so I have cat5 phone jacks and I want to use them for ethernet how do I do that? Is it the same as this?

@YossiKo 2 жыл бұрын

I have Sonos speakers that are connected to my WIFI but they're always get disconnected from some reason (although I have a strong WIFI signal). will this sonos connect will help me even that I don't have an amplifier or surround sound to connect to it?

@audioenvision8626 2 жыл бұрын

Make sure you are running the latest firmware and app. You may want to look into a SONOS boost. The Sonos Connect is a legacy music player which has been replaced by the Sonos Port. The Sonos Boost is a stand-along Sonos mesh node.

@YossiKo 2 жыл бұрын

@@audioenvision8626 Thanks🥰

@lukasbubliauskas 2 жыл бұрын

Could I do this same thing but with a cat 8 insert?

@audioenvision8626 2 жыл бұрын

Yes, but you are not going to see much benefit if the house is not wired for Cat8. It's a lot like putting a golden gas cap on a Ford Fairmont.

@KayceeVal 2 жыл бұрын

@@audioenvision8626 How do I know if my house is an A or B for the hookup? I didn't hear you explain the difference when hooking the ethernet plug into the wiring.

@Blackdog4818 2 жыл бұрын

I need to replace my 30 year old, mercury-switch Honeywell because it's off by about 4 degrees all the time. But I'm unsure about how many wires I have back there because I only see 2 wires. There are 4 wires coming out of the furnace panel though. Can I just turn it off at the furnace switch? BTW, you really need to do that up close.

@audioenvision8626 2 жыл бұрын

I have installed these on old furnaces in Durango, CO and they work great. The NEST is adaptable to many different conventions except for RF type thermostats which are fairly new to the market.

Ең жақсы KZbin

Пікірлер