I was there on Saturday. Were you at the grand stand? kzbin.info/www/bejne/p2O0hZyYhb6kmsk kzbin.info/www/bejne/mqHGZH-Cnt2ZfNk kzbin.info/www/bejne/n5ukgaeXhperh5Y
@ModyKhan21 сағат бұрын
Huge thanks as always for an amazing video. I didn't have the option of Archer Stab and Archer calib option, upon updating the module, I have them appeared on my Frsky X20s. However, LUA script was downloaded and added to the folder. Do we have to do anything with the LUA script which was added to the Tx's folder?
@texnikvova5 күн бұрын
👌
@velvetsound6 күн бұрын
Ok I’ve watched like 30 videos on pairing and working with FrSky stabilized receivers and this one is the best by far for Archer+, TW and TD S series. Thank you. Very clear.
@8HrToGo23 сағат бұрын
Thanks for watching and kind comments!
@tonybeverley54068 күн бұрын
Hi there great video by the way,what I was wondering about flight modes,can you use flight modes to individualy tune in gains on my frsky sr8 gyro,instead of having them all set and adjusting it with one know,so one flight mode for aileron,one for elevator and one for rudder and tune each one in each flight mode and once it is done then go back to the normal set up of the 3 position switch with the correct gain in stabilise mode,thanks for your help
@thienducdao55708 күн бұрын
Is this set up only work for planes? I fly helicopter and could not figure how to set it work properly.
@8HrToGo8 күн бұрын
Real Flight simulator software is too complicated to set up with the FrSky radio (bc it's mainly written for Spectrum radio), and I don't fly RC helicopters. But from talking to one of my RC buddy who do fly RC helicopter, and he mentioned that you best go with the Accu RC simulator for helicopter simulator flight. Hope it helps.
@waynetri110 күн бұрын
Thank you!
@linerv12 күн бұрын
Very helpful guide. Have you maidened the mb339 with the stabilized rx yet? If so, how does the stabilizer perform?
@8HrToGo12 күн бұрын
Not yet.. my 9 to 5 work had been busy lately so haven't got around finishing the MB yet.. should have more time during winter break coming. As for the TD SR18 and its stabilizer, many turbine flyers in the RC community used them and they all love it. Thanks for watching!
@carlpayne602412 күн бұрын
Very instructive. Thanks
@Fernando-m4z4o12 күн бұрын
Nice
@8HrToGo12 күн бұрын
Thanks
@AnnabellePrince-g7q12 күн бұрын
Dropem
@michaelladd989926 күн бұрын
F 15
@deirdregarry28 күн бұрын
Great job
@It-does-not-work28 күн бұрын
The flying fish!
@doverivermedia393729 күн бұрын
Nice video & great tips 👍 I Don't understand the cloth on canopy between flights. "Pop corn build up" what's that all about ? ... 🇬🇧
@8HrToGo25 күн бұрын
Inside the canopy are foam so yes, it is to prevent pop corn buildup.
@doverivermedia393725 күн бұрын
@@8HrToGothanks. because of heat ? Why would the foam do that ?
@ПавелВасильев-е9нАй бұрын
ЛЕГЕНДА. СИ - 130 - "ГЕРКУЛЕС".👍👍👍
@Blue68CamaroАй бұрын
A lot late to the part BUT under the current version if Ethos, Under action there is no Play Value. Either I am doing something wrong, very possible, I am new to FrSky, or there has to be another way. I have found your videos informative and strait to the point!!!
@dogfoodkingАй бұрын
Dope!
@ps4kidgaming56Ай бұрын
Great! Now go to flight mode and add delay 3 seconds on your elevator and aileron
@jeanmarieponchin5932Ай бұрын
merci beaucoup pour m'avoir aidé a déchiffrer ces informations! c'est crucial !🙂
@jeanmarieponchin5932Ай бұрын
thank you so muchefor your explains (from france) 👍.
@8HrToGoАй бұрын
je vous en prie😁
@rolesroys12Ай бұрын
This video is great, I have a request, can you make another video for a propeller plane with two ailerons and two flap systems with FR SKY-TDSR 10 Receiver
@Guy460226Ай бұрын
great video but i can get the pic into file manager but when i go to edit model the pic is not there what am i missing. Any help would be appreciated.
@8HrToGoАй бұрын
If you have an iPhone, you should be able to transfer the picture taken onto your PC via the correct cable. I'm using window 10.
@user-rx8qq8sk9ydv1ce5ibАй бұрын
Thanks, I did the same but and set it on pot 3, but It as if on 2 point curve, either low or or high !! any idea how to fix that
@8HrToGoАй бұрын
Isn't there only 2 pots right below the screen. Make sure u set it as analog, then there should not be 2 points curve.
@user-rx8qq8sk9ydv1ce5ibАй бұрын
@@8HrToGo thanks a lot. Done and working flawlessly
@user-rx8qq8sk9ydv1ce5ibАй бұрын
👌👌 thanks
@Hitman-md5ieАй бұрын
Just ordered my first edf the bae hawk 70 will this work on that using frsky 10+ receiver
@8HrToGoАй бұрын
Yes, it should work, 10 channels RX is more than enough.
@oponohouАй бұрын
Is it possible to do same thing with telemetry values ?
@kristanleАй бұрын
Lots of information. Thanx
@8HrToGoАй бұрын
XOXO.. lol
@MarvinShealyАй бұрын
Outstanding video. I am new to the hobby and just ordered the x20. I have a couple of questions about the simulator setup. Which version of the RealFlight simulator are you using? Do you have to use the FrSky simulator doogle? Thanks in advance for your help. Also are there other flight simulators that might be more compatible with the x20?
@8HrToGoАй бұрын
You won't go wrong with the X20. I used Realflight 9.5.
@centergear10Ай бұрын
Very helpful thank you.
@8HrToGoАй бұрын
Thanks for tuning in and glad it is helpful.
@Hitman-md5ieАй бұрын
Great video just about to get into using flaps in my eflight Cessna 150 , so you are big help.
@8HrToGoАй бұрын
Awesome, make sure you can setup flight modes too.
@texnikvovaАй бұрын
👍👍👍👍👍👍👍
@8HrToGoАй бұрын
Thanks and glad you find it helpful.
@michelbegue5199Ай бұрын
Brilliant, I've just got my new X14 radio and your recommandation works perfectly😎. Many thanks
@8HrToGoАй бұрын
Thanks and I’m glad it was helpful. Happy flying!
@roger_fr9Ай бұрын
Hi, I really liked your video, thanks for the explanation, you helped me a lot, have a nice flight!
@8HrToGoАй бұрын
Glad to share what I know to the RC community and thank you for your support.
@Silent__killer2121Ай бұрын
Wohhh
@Rantanplan-0815Ай бұрын
Hi👋 You dont have to make this anymore,its allready fixed with an update👍,realflight use the first 8 channels(maybe more,i not try it ),works without issues😊. Das braucht man mittlerweile nicht mehr machen,es wurde gefixt mit einem update. Realflight erkennt ganz normal die ersten 8 kanäle(eventuell auch mehr,noch nicht getestet)😊 Liebe grüße
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
👍. Thanks. Can you change the theme colors on FRsky in general. And for the Battery sensor screen, could you change the colors? Thanks
@8HrToGo2 ай бұрын
Yes, but you would need to edit the code and change the RGB color number.. it's not straightforward. Also, I believe there's a new script update from him lately that's much better.
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
@@8HrToGo thank you so much for the very useful videos
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
Thanks for sharing. Now in 2024 models, isn’t that update possible to do using the built in WiFi of the Radio rather than doing the above on the computer? Thanks
@8HrToGo2 ай бұрын
As far as i know at this time updating the radio would need to be done via Ethos Suite... and it's not that difficult as the Ethos Suite is very user friendly Thanks.
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
Great! Can’t the radio update be done using the WiFi option like in the relatively new Spektrum series NX, where you basically connect your Spektrum Radio to home WiFi and it updates,, like mobile ioS or Android. Does the Frsky radio has a WiFi wireless connectivity feature!? Thanks
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
Please make a comparison video for x 20 and pro. I got the RS 20 but not sure what are the differences. Still new with FRsky coming from spektrum and futaba
@8HrToGo2 ай бұрын
Please check out this video kzbin.info/www/bejne/sGG4kmqlaKx1b80 Thanks.
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
Thanks for sharing. Could this be done while using a gyro like the FMS reflex ? Thanks
@8HrToGo2 ай бұрын
I never try FMS Reflex so I cannot comment on it. Thanks.
@user-rx8qq8sk9ydv1ce5ib2 ай бұрын
Nice take off. Is this the new eflite (balsa) or the topflite ? Would be great to mention the brand and size. Thanks
@8HrToGo2 ай бұрын
Top Flite, not sure they make it anymore.
@scotmash1Ай бұрын
I fly at SeaWorld who is this
@user-rx8qq8sk9ydv1ce5ibАй бұрын
@@8HrToGo thanks
@nunu46922 ай бұрын
i have a tx16smk2, wheres the video to update this reciever?🤔
@meljones70662 ай бұрын
Thank you, great help to using flight modes.
@8HrToGo2 ай бұрын
Flight mode is essential to becoming a better RC pilot. Thanks for tuning in.
@sanchezguerra12 ай бұрын
Finaly i can do it!!!!! with an R9 MX.......NO USE THE TANDEM SELECTION......need to see the video four times!!! THANKS!!!
@8HrToGo2 ай бұрын
Great. Now your plane is safe with haveing both 900 and 2.4.
@sanchezguerra12 ай бұрын
Thanks fo the info.......this configuration works with other simulator? or only with FSim.......
@michaelladd98992 ай бұрын
Great video's very well presented, I have one question, can you assign sounds to a stick? I don't see it in the list that you can assign. I'm running ethos in an rc tugboat and thought it might be fun to add a sound like "full ahead" when you move the throttle stick to the full forward position have it triggered in the last 10% would be even better. Any thoughts?
@CheifyRC2 ай бұрын
Excellent video and very helpful. Just bought an x20 to go in a big Heinkel so this video is goldust to me. Thank you for sharing your knowledge 🤩🤛🙏
@8HrToGo2 ай бұрын
NP, if you ever get the Heinkel ready, be sure to video and post it.. I would love to see it fly. Thanks.
@CheifyRC2 ай бұрын
@@8HrToGo 👋 there’s quite a few videos of it flying already on my channel If you want to take a look. We needed to upgrade the radio system. Now we will have telemetry for everything with the x20. 🤩🤛
@WA1LBK3 ай бұрын
Very interesting & informative video! 🙂 The surprising thing to me was that you didn't seem to be flying especially far away; but if you're in a high RFI environment (as you seem to be), the receiver could be struggling a bit to pull your transmitted signal out of the noise. I haven't had this issue (so far) with any of my Spectrum radios (currently using an NX10SE, also have an older DX9 as a backup); I do some flying in a city environment with mostly UMX & park flyer style planes (my Visionaire is the fastest plane I use for park flying); not sure if the receiver in it (without specifically looking at it, I think it's an AR630?) has telemetry capability. In the city setting, I'm generally flying low & close (especially if I'm flying my UMX YAK 54 3D). I recently started going back to my old club field which is in a fairly rural area (bought an e-Flite F4U Corsair, which requires more runway, & is far faster than the "fun-fly" planes I otherwise fly; at least until I get used to it, I don't DARE fly it in a park setting!). I always range-check a new plane before flying; the only incident I can recall was years ago, flying at a soccer field on the ground of my last employer (I'm now retired); the soccer field was literally right next to the plant that I worked in, making it convenient to go out during my afternoon break & get in some flying with either a MX or park flyer plane. I was flying a UMX "BEAST 3D which I was very comfortable flying; when suddenly, from about 30 feet altitude, (& in straight & level flight) it nose-dived straight into the ground. 😳 Fortunately, there was relatively little physical damage; I picked it up, & out of curiosity, did a range check on it. I was shocked when I found that only about 3 feet away from it, I had NO control! (It worked if I brought the transmitter in close). Brought it home & checked it, found that the antenna (which in this UMX plane, was about a 1" piece of wire off the receiver / speed controller / 2X servo board) apparently had a cold solder joint from the factory, & had broken loose! 😲 Resoldered it, and the radio range was restored! 🙂 I'm going to have to give your suggestions here a try. Thanks!😀
@8HrToGo3 ай бұрын
I think the most important thing to pay attention to is the H (Hold) number. If you consistently see high number of holds, that's a red flag at where you fly, and you should consider don't fly there or reposition your antenna or add additional 2nd antenna. Please pay attention to it. Thanks for your detailed comment.
@EclecticDiscus3 ай бұрын
I have been doing RC jets for 30 years and Never have seen a good flying RC F 18.