hey, could you use it for a vynil rooftop (convertible mustang), so could you waterproof it?

Why is it not spinning as fast as the old starter?

Thanks for the vid! I had "Hemi Tick" from an driver's side exhaust manifold leak due to two broken bolts. Followed you example and additionally I separated the steering shaft as it made getting things out and in easier. Used the BD Diesel aftermarket manifold which is a nice kit.

Exhaust Leak is NOT the Hemi Tick. The Hemi Tick is from the lifters/cam failure. Exhaust leak is Exhaust leak. period. Also, any specific reason you didnt go for shorty headers and decided to replace the original logs with new logs?

Different Strokes.......for different folks 😎

Whatch You Talkin Bout Willys? Your right Dave.......doesn't work 😎

100% the best video on youtube on how to do this!

Definitely now how the instructions say to do it, but looks like it works for you. I wouldn’t want that big plunger rod in my way all the time.

If the bolt is recessed you have to protect the threads. Use your other hand to hold the nozzle

I was wondering if this product would also be able to paint flexible silicone for example like on keypads, where when deformed, it also doesn't chip off...

What if we don’t have the plus and minus sign?

Very thorough and very helpful!! Thank you!!

Thanks for the upload. Diagnosed my bad starter this way. New one went in and car started.

i smiled through this whole video, nothing brings kids and adults together better than getting dirty while working on a car. she will always come back to that memory.

I'm going to try installing a 10" unit from ASURE. 2019 Premier. I have too many curiosities about it to not do it. I'm hoping I dont lose the 360 camera or can hack a way to get it back. Also hoping they incorporated the factory vehicle settings into the software, but not holding my breath on that. Worst case, I'm going to have to figure out where to locate the factory screen to retain setting access. At the same time I'm putting in a "super night vision" dash cam that comes with a 12" screen in the ratio of a rearview mirror. I think im going to print an adapter to snap it into the sunglass holder in open position.

Made in china😂

Will the feature turn back on if I engage automatic again?

Thank you this video was very thorough I only had to watch once and replaced mine

You speak of using a 7/8" wrench on the fuel line to carb inlet fitting. It's a 5/8" need.

great video

should i be worried about melting the aluminium?

finally a simple video thank you

anyone know where you can buy the lock for the console ?

Very good video ❤

I would definitely clean the dirt off first before using interior detailer

Very nice Job! Thx! I'm looking to gain access to the rear camera's trigger wire. Does any one have a schematic of the infotainment's connectors?

Thank you for great video helpful 👍

Very useful walkthrough!

300 how much my service tech charged

I wish every dad show their kids to work on cars ❤

Make video With Edelbrock intake, aluminum heads, Holley Avenger series 670 dp carb, please, restoring 80 c10

Mine is loud but not this loud. It also does not tick

where can I find that exhaust recirculating valve round gasket? can't find the right one in google, mine looks exactly the same as yours

I have been putting mine off for years. Watching this made me realize that while it doesn't look like a good time, it is definitely within my skillset. May have to consider doing the repair when I get some time off for the holidays.

Thanks!!! I used my booster pack and a wire alligator clip.

so i had the tick and decided to just upgrade to some headers while im down there and same exact bolts as you i have snapped...... going to be fun.

u got a future mechanic & KZbinr on your hands, she should have her own channel by now

2:02 yeah, I'm going to be finding another video, but thanks.

Very informative!

Guys all you have to do is unplug a wire under the hood

I get a grinding like sound when I accelerate heavy under load, I’m guessing it’s exhaust leaking from my broken studs on my manifold, had the transfer case looked at and it’s not that.

Great video, short, simple and shows what needs to be shown. Thank you. Now to unplug the wire that runs from the backup camera to the light sensor so that it will stop blinding me at night. He said it's the #3 pin on the passenger's side plug, gray and green wire in the bottom center of the plug. The the factory backup camera's brightness will be adjustable with the dash lights

My pan is stuck thought I was doing something wrong but I don't think so

Nice job, learned a lot. Thanks for posting!

If you connect directly to the blue/white stripe (remote turn on wire) like you did , How dose your amp get the signal from the radio to turn on Shouldn’t I jus splice into the RTOW allowing it to continue to the amp

This is very dangerous for kids

I appreciate this because I suck at welding so I will put this to the test ..😂looks really good tho.

What wire did you tap for the illumination/light. from the dodge.

All it is is one wire under the hood

Whats the part number of that starter?