Nice upgrades, but my eyes hurt the way you installed the front coilover😅
@LapDeleted5 ай бұрын
What camera did you use to film this, just found your channel after seeing you at the ring and posting on tracktime 😊
@wardy11015 ай бұрын
Just film it all on my phone & a tripod, if I ever reach my channel to a point where it pays I’ll be putting it straight into a proper camera 🙌🏼
@LapDeleted5 ай бұрын
@@wardy1101 nice man! The quality is really good and I wasn’t sure if it was the Dji Pocket 3 or something like that 👍
@david_driver5 ай бұрын
Like every episodes. I have an M4. Hello From France 👍
@wardy11015 ай бұрын
Thank you & glad your enjoying the content 👏🏼🙏🏼
@david_driver5 ай бұрын
@@wardy1101 did you do the powerflex bushing job for the differential support ?
@wardy11015 ай бұрын
No this car has no aftermarket differential support, obviously it’s helps but it’s not a must have upgrade so opted out
@s87-d7d5 ай бұрын
Mate you need the camshaft alignment
@wardy11015 ай бұрын
It’s doesn’t because it’s a fresh rebuild because the crackhub went, if your addressing to the noise the fan module has gone keeping it on full time
@R55LSD5 ай бұрын
Hi mate my BC Er's came today. One thing I've notice over those in the video are mine came with normal progressive rate front springs not linear one like in the video? Is this because I opted for the normal spring rate kit? What rates did you pick?
@wardy11015 ай бұрын
If you haven’t already get at me on the ig so I can take a look
@R55LSD5 ай бұрын
@@wardy1101 I’ll add you spoke to bc they are linear but they are barrelled as apposed to yours look straight
@Slmzilly5 ай бұрын
Song?
@da-mazing85005 ай бұрын
Liking these way more than i thought i would. Its a track weapon so meant to be a tiny bit gappy around the edges!!
@wardy11015 ай бұрын
Yeah that’s a very fair point, just me being over the top & wanting everything perfect 😂
@F80ANT5 ай бұрын
Fire 🔥 Can’t for my stuff to ship in.
@gtrlife29415 ай бұрын
Hi do u know what mods are needed for a street car on a track standard power i have a gr yaris thinking of going for a m3 f80 next
@wardy11015 ай бұрын
Trial & error, bare minimum is like wheel tyres, coilovers & brakes
@testaccount075 ай бұрын
Mate get that speakers out, if go down the road you will and up with a fully build like I did with my m2. The sound in a empty track car is amazing!!! Just get some good voice cancel inears and ur good to go :) I sold my m2 and got now a m4c and I will do the same gt build like my m2, now I’m enjoying my m4 Clubsport build with Navigation and music, but I will throw it out over the winter :) and do the same thing with the m4 like I did with the m2
@wardy11015 ай бұрын
Probably will end up doing it at some point, plan is to go full cage after this season so will probably loose them then & got some stuff for the diff now so the whine might change my mind as well once all that’s in 😂
@M3fahrer6 ай бұрын
Nice work 🍻 Getting ideas for my f80. It’s much tamer but still loves track duty. Still planning to stay on the BCs?
@wardy11016 ай бұрын
Thanks man, yeah for this season at least then maybe change up to intrax over the winter period
@shahedcassim73926 ай бұрын
Subscribed! Damm bro what do you do for a living. This is an expensive hobby!!
@Casey13F6 ай бұрын
Honestly it didn't change it much from stock....
@loekfelten5486 ай бұрын
Very nicely done 👍🏻 Furthermore, every BMW needs a wheelstud-conversion. Especially if driven on the track. Hope you will not forget that 😉
@wardy11016 ай бұрын
That's the plan! Been waiting on them to arrive from Germany as they was back ordered 😅
@MrCrazydave666 ай бұрын
13:53 made me laugh lol
@wardy11016 ай бұрын
Funny bit 😂 genuinely how it normally goes, go to do something end up doing something else 😅
@jonnygreen21466 ай бұрын
Awesome to watch!
@wardy11016 ай бұрын
Thank you! Much appreciated 👏🏼👏🏼
@R55LSD6 ай бұрын
Could you please do a video on the BC ER's? Run though setup, what settings you run etc. I've just ordered a set and would be helpful. Cheers
@wardy11016 ай бұрын
Yes that shouldn’t be a problem, should be doing a walk around on the car what should include all the unknown jazz like that
@jonboyy13276 ай бұрын
Enjoying this content. Really got the itch to move from my e46 M3 into one of these. Just come back from Nürburgring in the last couple of weeks so I’ll look forward to that content coming up. Keep pushing towards with the project 😁
@wardy11016 ай бұрын
Well I wouldn’t advise against it🤣 thanks for the good feedback helps boost me massively to make more so don’t worry they’ll be plenty coming up summer is nearly here 👏🏼
@fAG-ku1sx6 ай бұрын
Liking the videos, are you going to get some videos of any ring trips this year?
@wardy11016 ай бұрын
Yes 100% current just waiting on parts to finish my M3 of then it’s go time, car will be out there full time this year so should be plenty of content coming up
@SD-hl5ed6 ай бұрын
Best sub for me this year - great work keep it going mate!
@wardy11016 ай бұрын
Thanks for the sub really appreciate it 🙌🏼
@testaccount076 ай бұрын
Hey mate, can u link me DLR's cant finde them anywhere... i got in the past one for my M2 but that was a LCI.
@wardy11016 ай бұрын
Just added the link onto the bottom of the description, there what I’ve use on this build however double what your modules look like to be 100% sure
@xZiMinDaveyy6 ай бұрын
I don’t know why I always see BC Racing on UK “track” cars? In the Netherlands is the most budget and shit coilovers you can get😂🙈 We run with Intrax,KW, AST/Moton. I only know honda guys use BC Racing (because of low budget). Maybe you have different ones because I see extra reservoir etc.
@wardy11016 ай бұрын
Ahahah technically bc are the cheapest good set of coilovers you can get in the uk really, step up from the set we run is intrax or nitrons, basically save a little bit of money with bc or balls to the wall 😂😂
@xZiMinDaveyy6 ай бұрын
@@wardy1101 ah ok👍🏼 I understand
@dayvo86186 ай бұрын
Great work on the build. Could you show in the next video where you are jacking the car before putting axle stands in place? I remember seeing someone else ask in the comments of your other videos. Thanks!
@wardy11016 ай бұрын
Probably my most asked question😂 yeah I’ll get a clip in for you in this weeks video 👏🏼
@romeole406 ай бұрын
How the hell Can you call it Brand new M3 when its NOT Brand new…. Its maybe new for you but still not brand new car
@wardy11016 ай бұрын
As in brand new ringtool build for 2024, sorry for the confusion 🫣
@3879142026 ай бұрын
thats the ticket! xx
@senditsammy6 ай бұрын
love the diy splitter mate. Gonna try to recreate this out here in California on my F82. Hopefully gonna try to add the bolts going through the front bumper with a diy air dam like the GT4 splitter shows also, and pair it with some canards. No idea how in the world im gonna do this but hopefully soon. How'd you measure the original one you made? And it's plywood right?
@wardy11016 ай бұрын
Got some work ahead of you there, be mega if you can get that done though & just do a cardboard version first then transfer that to the boards which is a “anti split poxy resin board” mainly use for scaffolding
@waynek56 ай бұрын
How do you find the BC’s ?
@wardy11016 ай бұрын
Overall better then people expected especially for the money, would definitely recommend 🤌🏼
@R55LSD6 ай бұрын
@@wardy1101 what setting do you run? Do you have have different settings for the road?
@wardy11015 ай бұрын
@@R55LSD no just keep it set to what I run in track as I’m willing to mess around changing it all the time
@R55LSD5 ай бұрын
@@wardy1101 Don’t suppose you know how many clicks front and rear? I’ll use it as a base setting
@wardy11015 ай бұрын
@@R55LSD all the way to the top/hard then 3 clicks back all round
@theDRIPg0d6 ай бұрын
You got the pov cam too low my boy. All we can see is your dash which is pointless to watch.
@wardy11016 ай бұрын
Nope not yet, doing the best with what I’ve got, myself a phone & a tripod
@williamgoode43556 ай бұрын
when are you thinking of going to the ring mate ? 👍🏽
@wardy11016 ай бұрын
Soon! Probably be there back end of April gives me this month to get the car sorted then it’ll be staying out there for the rest of the season 👏🏼
@jamescpug1066 ай бұрын
Loving the videos mate! Looking to do similar with my F87 m2 comp. Subscribed 👌
@wardy11016 ай бұрын
Welcome aboard! Glad you enjoyed 👏🏼
@3879142026 ай бұрын
F80s are selling for hotcakes nowadays!
@nomessininc.6 ай бұрын
Would’ve been a perfect time to convert to stud and nut having them hubs off, cooling dust covers look smart though 👍
@wardy11016 ай бұрын
Yeah that’s the plan just waiting on the stud & nut kit to arrive from Germany so it’s coming 😅
@JamesPoland-vb9eo7 ай бұрын
Bros living the dream. Ringtools, spaniels, gaming rig 🤌🏻😮💨
@wardy11017 ай бұрын
Some would say the perfect combination 😂
@SajibSensei7 ай бұрын
Awesome Video I recently visited your KZbin channel and enjoyed your content. However, I noticed that your videos are not ranking well due to some issues. I believe that if these issues are addressed, your videos will rank better. Here are the issues I found with your channel: 1. Video SEO has not been properly done. 2. Videos are not being released on time. 3. The video titles are not optimized. 4. Keyword research has not been done effectively. 5. Video thumbnails are not appealing enough to attract viewers. Solving these issues will help your KZbin channel perform better.
@wardy11017 ай бұрын
Much appreciated, trying my best to keep my uploads weekly however working then doing videos after work or weekends to then get them out Saturday or Sunday is proving difficult atm which I think is resulting in a rush on the editing side so need to try some changes I think
@jordzta7 ай бұрын
Great vid again, Informative video as always. If you don’t mind me asking would I need all of the parts on the video ? I still want to daily the car. Kind regards
@wardy11017 ай бұрын
Thanks man much appreciated as always, I’d say yes to that, just gotta be careful with the camber to toe on alignment really for daily use because if you get it set to aggressive then your going to kill tyres like no tomorrow
@fAG-ku1sx7 ай бұрын
Id be fuming with whoever put them bolts on.. unless it was the owner 😂
@wardy11017 ай бұрын
Definitely had a air gun on them and wheels nuts wow😂 probably the shop where ever he’s had the tyres fitted I’m guessing 🥲
@nath_ed307 ай бұрын
Lets gooooo🔥🔥
@Solo11M3cs7 ай бұрын
Im getting my midpipe and Mad downpipes install this weekend.
@wardy11017 ай бұрын
Should be sounding much better!🙌🏼
@Solo11M3cs7 ай бұрын
@wardy1101 is what im hoping for
@michaelcheshareck32757 ай бұрын
I just put a MAD single mid pipe on my G80, along with a SST valve controller, and it is a huge upgrade to the sound. It can be obnoxious with the burbles with the valves 100% open, but stock quiet with the valves fully closed.
@NicktheBuffer7 ай бұрын
As someone switching up an F82 to a track build I’m Really enjoying these videos 👍😍 Can i ask, what are you jacking the car up on? I didn't know there was a point in the middle of the car.
@wardy11017 ай бұрын
Thanks man glad your enjoying them🙏🏼, both jacking point & in the same place as a m4 however on most cars like the m’s you can jack them up anywhere on the frame what runs down where the side skirt is, this won’t damage the car, I’ll drop it in the next vid for you 👀
@jordzta7 ай бұрын
Great vid again, Do you intend to sell the font lip for others to buy? I’ve gone through way too many 🥺yours looks very robust.
@wardy11017 ай бұрын
Thank you, yes I’ve been trying to get things in the works so I can supply the front lip as a complete kit, once I’ve got things in place & sorted I’ll let everyone know via KZbin & insta
@jordzta7 ай бұрын
@@wardy1101thank you, I will definitely make an order.
@zwanzigturbo7 ай бұрын
Keep it up brother you have a great car and not only the finished car is enjoyable but the process of it its amazing too cheers
@wardy11017 ай бұрын
Thank you brother it’s massively appreciated 👏🏼
@Nate_H.8 ай бұрын
Nicely done man, should function well and looks great. Honestly, you could probably make a few of those and sell them online.
@wardy11018 ай бұрын
Not a bad idea I’ll consider that one, maybe people will be same as me & be fed up of blowing carbon ones off😂
@scottbrown41428 ай бұрын
Gorgious car, much prefer the M3 to the M4. Could the boot leak be from the wing mount holes? Maybe thats why the boot handle was being dodgy?
@wardy11018 ай бұрын
Much appreciated👏🏼, when I watched it back I think it was just from me opening it up then all the water came in but good idea it could be from the wing mount holes
@mxm_0978 ай бұрын
Been loving the vids mate keep it up👌
@wardy11018 ай бұрын
thank you, don’t worry they’ll be a lot more to come this is only the start👏🏼
@wardy11018 ай бұрын
To be fair I’d say there a very underrated coilover definitely more ideal if your looking for really good coilovers what are half the price of other brands