2 жыл бұрын
Пікірлер
@larrygk1257 6 сағат бұрын
Excellent. Did you reference the temp sensor that connects to the grill? I am about to do this on my 2002 TT. I've done it on a standard 996 a few years ago.
@NorwegianCarGuy 4 сағат бұрын
@@larrygk1257 I mentioned it if that's what you mean?
@TimothyLeigh-k6k 2 күн бұрын
As a matter of interest do you still have your old shock absorber units with the lower spring holders attached and if so do you wish to sell them?
@NorwegianCarGuy 2 күн бұрын
Hi, The holders were reused and one shock was damaged, so I think both were thrown away.
@TimothyLeigh-k6k 2 күн бұрын
@@NorwegianCarGuy OK thanks.
@TimothyLeigh-k6k 4 күн бұрын
One final question. After you remove the six bolts on the drive shaft and the shaft pulls out, is it easy to put it back in again into the correct position when screwing the six bolts back in. Is there some gear than needs to be aligned?
@NorwegianCarGuy 4 күн бұрын
@@TimothyLeigh-k6k I found it easy. Just align the bolt holes and you are good to go👍
@TimothyLeigh-k6k 4 күн бұрын
Thank you very much for your help.
@NorwegianCarGuy 4 күн бұрын
@@TimothyLeigh-k6k your welcome 👍
@timothyleigh3456 4 күн бұрын
I have another question. When you replace the spring on the shock how do you know exactly where it goes. Also when you slide the new shock into the holder how do you know when it rotates exactly where is the correct position. See 16.30 in the video. It slides in but if it can rotate which is the correct position?
@NorwegianCarGuy 4 күн бұрын
The aluminium cradle that holds the spring has a stopper, so it will only fit one way perfectly. It is the same way with the shock into the holder. The shock has a "fin" on the back and the holder has a slot that it fits in. Good luck!
@timothyleigh3456 4 күн бұрын
It’s the bolt you are undoing at 7.16
@NorwegianCarGuy 4 күн бұрын
That one should be tightened when the car is on it's wheels, so it was tightened to spec at the garage the did the 4 wheel alignment. The spec is: Control Arm to Subframe: 120nm, 89 lb-ft .Top tip. Google 996 turbo repair manual and you can download that and find all the correct settings there.
@TimothyLeigh-k6k 4 күн бұрын
Nice video thank you. What was the torque setting on the large arm bolt on the suspension arm as you didn't mention it in your video? Thank you.
@NorwegianCarGuy 4 күн бұрын
@@TimothyLeigh-k6k thanks 👍 can you give the time in the video, so I'm sure what bolt you mean
@jessicaroman9188 7 күн бұрын
Wow mind blowing I love your content keep going❤
@NorwegianCarGuy 7 күн бұрын
@@jessicaroman9188 Thanks so much 😁👍
@jessicaroman9188 7 күн бұрын
@ no problem ❤️
@davidabravanel1982 7 күн бұрын
Great video! Could you please help me understand how you know if a rear facing car seat will fit in a 911? I have 996 C4 cabrio and looking for one... but scared to buy online in case they don't fit. Any recommendations really welcome!! Thanks!
@NorwegianCarGuy 7 күн бұрын
@shivaspacetech My recommendation is to go to a store, or buy used. You can find recommend seats in the film and I believe most Britax will fit. The main problem is the width in the base for most seats, but also the angle for the back, so it needs to be a pretty simple construction. I bought used, and tested the seat in the car before buying 👍
@davidabravanel1982 7 күн бұрын
@@NorwegianCarGuy i'll see if i can find britax in italy, never heard of. Thanks a lot man
@NorwegianCarGuy 7 күн бұрын
@shivaspacetech No problem, good luck 👍
@nzos14 7 күн бұрын
Thanks for this, been thinking of doing my center console for a while but I don't think I've ever seen it on a silver car, looks great!
@NorwegianCarGuy 7 күн бұрын
@@nzos14 thanks 👍 I really like it👌
@Francois997.2 15 күн бұрын
No video of taking off the hardshell ? Was thinking about spraying but after this video I think I will have it wrapped.
@NorwegianCarGuy 15 күн бұрын
@@Francois997.2 unfortunately no :( I was on holiday when it was done, and the leather guy that did it was not interested in filming it. You can see how the seat is made if you look at the linked video. The leather is partly glued to the seat back, so I let the leather repair guy do it for the best possible result.
@997GURU 16 күн бұрын
Nja, dette kommer jeg aldri til gjøre, litt patina skal det være 😂😂
@NorwegianCarGuy 16 күн бұрын
@@997GURU sticky plastic er IKKE patina 😜
@997GURU 16 күн бұрын
@@NorwegianCarGuy hehehehe jeg er forsåvidt enig i det, der tabbet porsche seg ut, utrolig dårlig 😂😂😂
@NorwegianCarGuy 16 күн бұрын
@@997GURU hadde det ikke vært en original option, hadde jeg ikke gjort det. Men når en får bort noe som både ser og føles kjipt ut, var det vinn vinn. Jeg har blitt positivt overrasket over både hvor fint det ble, hvor bra det føles og hvor mye det har hevet den generelle følelsen av kvalitet i interiøret 👍
@Hubbahubba40 17 күн бұрын
Looks great mate, I am bias though. It's amazing how these crap company's stay in business, but glad you got it sorted .
@NorwegianCarGuy 17 күн бұрын
@@Hubbahubba40 thanks! I think it's a big improvement 👍 Yea some companies have no pride in their work or ethics at all. It's extremely frustrating to deal with people like that. Almost tempted to take it out and repaint it myself to get it perfect, but it's better than it was at least 👍
@Hubbahubba40 17 күн бұрын
@NorwegianCarGuy I had a similar situation with my wheels. A company over here called the 'wheel specialist' refurbed my turbo twists leaving loads of swarf on them and then painted over the top. One of the wheels didn't even need doing and they made it worse! Clowns.
@NorwegianCarGuy 17 күн бұрын
@@Hubbahubba40 horrible. I'm almost tempted to start my own paint shop when seeing all the crap work being done...
@johnrb9397 18 күн бұрын
Nice job friend 👍
@NorwegianCarGuy 17 күн бұрын
@@johnrb9397 thanks so much 🙏😁
@CarPlebs 18 күн бұрын
Personally I would never bother...
@NorwegianCarGuy 18 күн бұрын
@@CarPlebs well I'm not gonna force you😁 looks good though 👍 and the quality feel of the whole interior is wastly improved
@merrittrimereit8606 18 күн бұрын
That looks great!
@NorwegianCarGuy 18 күн бұрын
@@merrittrimereit8606 thanks 🙏 appreciate the support 👍
@eterno1 18 күн бұрын
Big improvement! Good job!
@NorwegianCarGuy 18 күн бұрын
Thanks!! Appreciate it, I like it much more than the black for sure!👍
@chojny23 22 күн бұрын
GT3 belt cover upgrade... just sent request to my local Porsche dealer!! What a great idea! Thnak you.
@NorwegianCarGuy 22 күн бұрын
@@chojny23 Thanks, love mine! no more rattle and better functionality👍
@chojny23 13 күн бұрын
@@NorwegianCarGuy belt covers installed. Oh this is looking now awesome! Thank you for the tip!
@NorwegianCarGuy 13 күн бұрын
@@chojny23 glad you liked it👍 happy to help. Thanks for the good feedback 😁
@997GURU 28 күн бұрын
Godt jobba ! Dette liker jeg, min 2005 997 har nå passert 200000 km. fortsatt stabil oljeprøve, nesten ikke slite metaller, ingen tegn til bore scoring , uåpnet orginal 3.8 liters motor Helt nydelig spør du meg
@NorwegianCarGuy 28 күн бұрын
@@997GURU takker👍 Det høres helt nydelig ut om du spør meg også👌😁
@tomburns890 Ай бұрын
Did u get a CEL light for this leak or no?
@NorwegianCarGuy Ай бұрын
@@tomburns890 No lights, but I had a suspicion. The car would reach the normal boost pressure and everything, but it felt a little more tame. After I found the leak, it reached the correct pressure way faster, and felt a lot quicker 👍
@tomburns890 Ай бұрын
@@NorwegianCarGuy ok thx. Glad it was a relatively easy fix. Cheers
@NorwegianCarGuy Ай бұрын
@@tomburns890 yes, I had heard about people having lots of trouble finding the leaks, but this was probably the easiest place of them all to fix👍
@richardgard2009 Ай бұрын
excellent video! what lift/ jack system do you use?
@NorwegianCarGuy Ай бұрын
@@richardgard2009 Thanks 🙏 appreciate the support 👍😁 tools listed in description, I have the Quick Jack BL-5000SLX
@markdavis911time Ай бұрын
Excellent work 👏👏
@NorwegianCarGuy Ай бұрын
@@markdavis911time thanks 🙏 appreciate it👍😁
@frederik2723 Ай бұрын
This one comes handy, have some dents in the back seats from the child seats! Thanks mate
@NorwegianCarGuy Ай бұрын
@@frederik2723 thanks 👍 good luck!
@eterno1 Ай бұрын
That looks amazing!!! great work!
@NorwegianCarGuy Ай бұрын
Thanks! Appreciate it!
@merrittrimereit8606 Ай бұрын
Wow I want to also do that 🔥
@marlonjoslin6730 2 ай бұрын
Check put a Lanco gear shift
@sunrisejak2709 2 ай бұрын
That is the action of extinction.
@NorwegianCarGuy 2 ай бұрын
@@sunrisejak2709 🥹
@OTRwerks 2 ай бұрын
Solid click into gear 🔥
@NorwegianCarGuy 2 ай бұрын
@@OTRwerks 🔥👌
@Hubbahubba40 2 ай бұрын
Step too far for me. I'm going for a standard 997 lever on my 996 C4S.
@NorwegianCarGuy 2 ай бұрын
@@Hubbahubba40 so far I love it, always felt the 997 shift was a bit to soft. But the main problem was the old cables.
@skibladner1 2 ай бұрын
avrage norwegian roadrage
@997GURU 2 ай бұрын
Nja, delte meninger om det
@NorwegianCarGuy 2 ай бұрын
@@997GURU ja det vil jeg tro😁 prøvd noe bedre?
@rodzonegarage 2 ай бұрын
You should use the 996 seat belt receptacle on the 991 seats FYI; direct swap over.
@NorwegianCarGuy 2 ай бұрын
@@rodzonegarage sold with the seats unfortunately
@Jupiterider1 2 ай бұрын
Great job. I look forward to your videos. They are very helpful.
@NorwegianCarGuy 2 ай бұрын
@@Jupiterider1 Thanks for the encouragement 🙏 appreciate it👍😁
@ShaunMcKenzie-n3p 2 ай бұрын
Thank you Norwegian Car Guy! This video was very helpful.
@NorwegianCarGuy 2 ай бұрын
@@ShaunMcKenzie-n3p thanks for the positive feedback! Appreciate it😁👍
@merrittrimereit8606 2 ай бұрын
I'm doing this tomorrow
@NorwegianCarGuy 2 ай бұрын
@@merrittrimereit8606 good luck 🤞
@theminingguy8517 2 ай бұрын
Recheck where wheels are rubbing with tyres in usual position. When hanging they touch lower than normal. Don’t go modifying based upon where you saw with the car in the air
@NorwegianCarGuy 2 ай бұрын
@@theminingguy8517 thanks for the tip. I can see the rub marks on the inner fenders. They are basically in the middle of the wents. I did some more plastic welding there. The radiator support is right behind it. There only is a little bit on full lock, so not a big problem. But still a little annoying
@chrisshands8157 2 ай бұрын
Another great presentation...thanks 👍 🦘🦘🦘
@NorwegianCarGuy 2 ай бұрын
@@chrisshands8157 thanks 🙏 appreciate it 😁
@haroldhedge9154 2 ай бұрын
Tire Rack in the US recommends 225/35-19 315/25-19.
@NorwegianCarGuy 2 ай бұрын
@@haroldhedge9154 would be perfect, but I can't find any good tires in the rear size... Michelin PS4S only comes in 315/30ZR19 😖
@haroldhedge9154 2 ай бұрын
@@NorwegianCarGuy I had 19s on my 2004 Turbo and went back to 18s because of matching 19 sizes. Not being available.
@NorwegianCarGuy 2 ай бұрын
@@haroldhedge9154 I went to 18" on the winter wheels, but there I discovered it was more options in 19" 😖 it is a bit of a pain. The LMs look so good though, so it's worth it for now