Would you recommend this kit? Been trying to decide between this and other ebay style drift kit
@jess5976Күн бұрын
Also was it easy to align
@Jz_JanksКүн бұрын
@@jess5976 huge fan of this so far, big benefit of them vs fapo/ebay is they are located in PA and can get you replacement parts in a day. So far just has toe plate alignment and drives fantastic can’t wait to feel it properly done
@Unknownn98204 күн бұрын
You can drift without a cage there?
@Jz_Janks4 күн бұрын
@@Unknownn9820 yessir, technically no multi car tandems on clubhouse but it happens😂😂
@Unknownn98204 күн бұрын
@@Jz_Janks asking because i go there a lot and want to get into actually drifting vs spectating and making parts lists/if im just going to buy into a project .. and on the website it says cage required for multi car but i saw people last weekend with no cage so was highly confused lmao
@Jz_Janks4 күн бұрын
@@Unknownn9820 Yeahh lol, until you’re A class you don’t have to worry about a cage👍🏼
@PaulHira5 күн бұрын
Ummm
@Jz_Janks5 күн бұрын
@@PaulHira pins on the harness side wasn’t making good contact, used a pick to bender back to tight and some dielectric grease
@NarutoUzumaki6189710 күн бұрын
🫡🥷🥶
@Jz_Janks9 күн бұрын
@@NarutoUzumaki61897 🤝🤝
@SEO-Experts-BD19 күн бұрын
love your videos
@Jz_Janks19 күн бұрын
@@SEO-Experts-BD thanks bro🤙
@SEO-Experts-BD19 күн бұрын
@@Jz_Janks welcome. what is your Instagram?
@Nitro194220 күн бұрын
Nice, im running E30 M42 Turbo at 1Bar boost gets 266WHP / 322Nm at the Wheels so 300 at Crank
@Jz_Janks19 күн бұрын
@@Nitro1942 sheeesh that’s awesome!
@EuroDrive-bp8rt22 күн бұрын
Let’s gooo yessir the merch is real !! Can’t wait to see big boi angle 🔥🔥
@Jz_Janks21 күн бұрын
@@EuroDrive-bp8rt so hyped to see how it does on track with a proper alignment
@nogaragegarage743922 күн бұрын
Bro sick stuff man my m44 is going strong but my m50s cylinder head cracked so I been tearing that apart and trying to source a head on a budget I got a couple shirts there sick good work dude
@Jz_Janks22 күн бұрын
@@nogaragegarage7439 Ayye appreciate that brother🫶🏼 thanks! Good luck with your builds bro hmu if you have questions!
@876drifters22 күн бұрын
🧌
@Jz_Janks22 күн бұрын
@@876drifters 🤝😂
@nightpyro794124 күн бұрын
What’s everything I need besides the plug and plug ecu, and how do you connect your ecu to your computer or other device ?
@Jz_Janks24 күн бұрын
@@nightpyro7941 pretty much everything is linked in the description, the ecu came with a cable to plug it in
@nightpyro794124 күн бұрын
@@Jz_Janks So when buying it I don’t need the extra stuff just buy the “standalone ecu”, and it comes with a cable?
@Jz_Janks24 күн бұрын
@@nightpyro7941 yeah the rm electronics one did, most standalone come with the usb to plug em in in my experience. This one was kinda a PITA to setup I was stuck with a crank no start for a while, that’s when @derryswop helped me
@@kallyjye I had @derryswop on ig remote tune mine to get it running then my buddy street tuned it to get it dialed in
@Jz_Janks24 күн бұрын
@@kallyjye np, good luck🤝
@lukasnevidzan552326 күн бұрын
Hi, how used ECu ?
@Jz_Janks26 күн бұрын
@@lukasnevidzan5523 rm tuning speeduino ecu plug and play, was a pain to get started if you can’t get it to connect correctly hit up @derryswop on instagram
@ChernobylDriftCrew26 күн бұрын
Get errr done
@Jz_Janks26 күн бұрын
@@ChernobylDriftCrew gettin there!
@owenross279229 күн бұрын
Mine has the same tach problem, has since I got it. What’s the cause for the tach being off?
@Jz_Janks29 күн бұрын
@@owenross2792 not sure tbh cause when I plug into the standalone I can see the rpms are reading fine to the ecu
@owenross279229 күн бұрын
@@Jz_Janks fair enough
@random_cube5440Ай бұрын
Next classic chinese angle kit, nice
@Jz_JanksАй бұрын
@@random_cube5440 no idea where it’s produced but it came from within the US🤷🏼♂️ got here in a day and seems high quality
@jgsterling203Ай бұрын
ct reppin' dont miss stratford or milford or orange, new haven was fun and the beach is missed greatly. its been 10+ years and I'v only gone back once to visit. oh whale!
@Jz_JanksАй бұрын
@@jgsterling203 it’s alright, the long winters and short summers make car season not the best but making die with what we have
@NoImpres.Ай бұрын
👏👏👏 m42 turbo
@Jz_JanksАй бұрын
@@NoImpres. gooood time
@NoImpres.Ай бұрын
subbed.
@Jz_JanksАй бұрын
@@NoImpres. 🫶🏼
@oswaldoshairperezroque8842Ай бұрын
Can be done on a m44
@Jz_JanksАй бұрын
@@oswaldoshairperezroque8842 yeah m44 people say you have to be a little more careful until you do rods and whatnot
@LouisLuzukaАй бұрын
Just curious if you recommend this or the turbo m42 😮
@LouisLuzukaАй бұрын
I have a m42 and 325 I’m on it 😂 1995 318is and I love it 😮
@Jz_JanksАй бұрын
Tbh I haven’t driven this yet, should be super fun but for the cost can’t really beat the m42 that drivetrain is a blast with a turbo strapped on, this setup cost like 5x that haha
@chilln6090Ай бұрын
what is a good tip you can give me working on my m42 that i also wanna turbo ,also i have the motor out and disassembled and im doing all fresh gaskets is there anything i should replace while its out and taken apart?
@Jz_JanksАй бұрын
@@chilln6090 all the basic maintenance stuff, head studs and a thick head gasket and should make jam
@kenreid7803Ай бұрын
The m60 is a v8 that didn't come in the 530i, did you swap?
@Jz_JanksАй бұрын
@@kenreid7803 bruther what?
@mrwisher1250Ай бұрын
M60 100% came in the 530s
@itsjopax713Ай бұрын
M60B30 is a 3.0L V8 that came in the E34 530i and E38 730i
@kenreid7803Ай бұрын
What's the exhaust setup? Cat and resonator delete? Muffler too?
@Jz_JanksАй бұрын
@@kenreid7803 cat and muffler delete, left the resonators in but I plan on changing the setup in the near future
@jonathanlefebvre7667Ай бұрын
Hey man great vid! I also go rid of the squid wiring too and passed every wire under my lower intake. But I can’t plug the icv anymore since the wire is too short. Did you have this problem? I’m really looking forward to your answer, not sure what to do😁
@Jz_JanksАй бұрын
@@jonathanlefebvre7667 hmm mine was still able to make it🤔 I currently don’t have an iac cause someone told me to delete it with turbo but now others have told me to add it back in lol
@nightpyro7941Ай бұрын
How did the guy get your ecu working? Did you have to download anything on a computer? Thanks
@Jz_JanksАй бұрын
@@nightpyro7941 I already had the program for him to tap in, honestly not sure what he did. Had to open the ecu and flip the switch internally so he could flash it and reprogram it but I was pretty lost at that point lol
@nightpyro7941Ай бұрын
@@Jz_Janks Oh lol, how much did he do it for and what was the process like? I’m thinking of doing it
@Jz_JanksАй бұрын
@@nightpyro7941 90$ and a couple hours, honestly I was working while he was doing it lmfaoo
@nightpyro7941Ай бұрын
@@Jz_Janks I assume you had too ship it too him then? Is there any chance you could make a video on the process of downloading and using whatever app you used for it, thanks!
@Jz_JanksАй бұрын
@@nightpyro7941 no didn’t have to ship it, he used a computer program to remote tap in and reflash it and change a ton of shit. I’ll try to go over that in a following vid
@SV867Ай бұрын
What kind of power are you looking at here? My e30 is gonna have a turbo setup on it eventually, gotta sort out all my other projects first
@Jz_JanksАй бұрын
@@SV867 butt dyno would say in the 230-250 ballpark, def scoots for how low of boost it’s at
@SV867Ай бұрын
@@Jz_Janks hell yeah that's awesome ↗️ definitely something to look forward to
@Jz_JanksАй бұрын
@@SV867 it is a blast haha
@FarrisBrightАй бұрын
What turbo manifold did you use
@Jz_JanksАй бұрын
@@FarrisBright @tims_turbo_centrum on insta!
@swrvo-cb2 ай бұрын
what manifold did you use?
@Jz_Janks2 ай бұрын
@@swrvo-cb e30 m42 manifold
@Jz_Janks2 ай бұрын
@@swrvo-cb and valve cover
@keenukoopman30732 ай бұрын
Care to explain the difference between the m42 engine vs the m44 dohc 1.9 engine ?
@Jz_Janks2 ай бұрын
@@keenukoopman3073 m42 is semi forged internals and traditional lifters instead of roller hydraulic style, makes a bit more jam stock with boost but m44s can be made reliable with rods and a few other supporting mods from what I hear
@keenukoopman30732 ай бұрын
Thanks man 💪
@Fouskas2 ай бұрын
is it easy to swap m43 to m42?
@Jz_Janks2 ай бұрын
@@Fouskas from what I’ve heard yes, I have no first hand experience with it. M43s can make Jake with a turbo strapped on there too
@Jz_Janks2 ай бұрын
Jam
@Ricosindinero302 ай бұрын
What gearbox ?
@Jz_Janks2 ай бұрын
@@Ricosindinero30 zf
@Princeafiiq2 ай бұрын
Will the e30 intake fits m43? i know that you use e30 cover but not sure it will fits on mine..
@Jz_Janks2 ай бұрын
@@Princeafiiq honestly I’m not sure we didn’t get m43s in America for me to get my hands on one and test😂
@Pjoah2 ай бұрын
The Brocken Headlight💀
@Jz_Janks2 ай бұрын
@@Pjoah 😂😂😂
@reyanarshad12332 ай бұрын
it is nesscary to upgrade internals before turbo ?
@Jz_Janks2 ай бұрын
@@reyanarshad1233 mine are all stock
@Jz_Janks2 ай бұрын
@@reyanarshad1233 wouldn’t recommend over like 10-12 psi stock internals, everyone I know who has gone higher seems to run into issues
@Jz_Janks2 ай бұрын
@@reyanarshad1233 I am currently set to 8psi and it’s a blast
@reyanarshad12332 ай бұрын
@@Jz_Janks How much power you generate at 8 psi ? And i will do minor changes such as fuel pump injectors, head gasket , manifold. So is this enough i want my car to be perfect not unstable i will be happy to keep it at 6 psi but it should run smoothly what do you suggest ? I have same car
@reyanarshad12332 ай бұрын
@@Jz_Janks My main purpose is to make my car fun to drive ajd do some drifting and also keep it clean from outside as well as in performance
@ElZerozable2 ай бұрын
did you change the diff to a medium case and transmission of a 6 cylinder or are you with the stock small case and trans
@Jz_Janks2 ай бұрын
@@ElZerozable yessir, 3.91 welded I have a subframe overhaul series walking over what’s needed!
@ElZerozable2 ай бұрын
@@Jz_Janks awesome dude i have a 318is coupe and want to turbo in the future will follow your content
@Jz_Janks2 ай бұрын
@@ElZerozable do it uppp, hmu if you have wuestions
@pearsonschofield76262 ай бұрын
Do you have any pics or know of one of your videos where you have the turbo manifold visible? I want to fabricate my own but im having a rough time with the spacing between the strut mount
@Jz_Janks2 ай бұрын
@@pearsonschofield7626 in the first vid of the build series I believe I show it
@Jz_Janks2 ай бұрын
@@pearsonschofield7626 hmm I actually just looked it doesn’t really show but check out his insta he has posted them before or shoot me a dm on insta I can find a pic
@pearsonschofield76262 ай бұрын
@@Jz_Janks alright I'll dm him thanks
@1j_jce102 ай бұрын
🍌 + Ⓜ️🏌🏼2️⃣ 🐌 = 🐐
@Jz_Janks2 ай бұрын
@@1j_jce10 lmfaooooo
@chassisharness81172 ай бұрын
Hell yeah!!!
@Jz_Janks2 ай бұрын
@@chassisharness8117 gonna have to see how she keeps up to that LS👀😂
@chassisharness81172 ай бұрын
Cant wait dude! @Jz_Janks
@doug___1jz2 ай бұрын
This car is a certified ripper, m42 undefeated
@Jz_Janks2 ай бұрын
@@doug___1jz frrr, can’t wait for more shredding🤝
@saky1012 ай бұрын
Cool build! i just finished turboing my 318i M43, which is a bit weaker engine but still lookin foward how it drives. Thanks alot for inspiration.
@Jz_Janks2 ай бұрын
@@saky101 Ayye good stuff, the single jingle turbos sound so good
@jevonlai87942 ай бұрын
What turbo manifold are you using or did you fabricated yourself??
@Jz_Janks2 ай бұрын
@@jevonlai8794 shoot I’ll link that my bad!!
@jimmyturner44632 ай бұрын
New to the m42 scene any and all recommendations for anything please let me know really like the engine so wanna keep it alive as long as possible lol hopefully going turbo soon as well
@Jz_Janks2 ай бұрын
@@jimmyturner4463 do cooling system, and send itttt
@OD.Nights2 ай бұрын
Imma slowly buy parts from this list 😂
@Jz_Janks2 ай бұрын
@@OD.Nights do it upppp
@ioijiopjkiopjkp2 ай бұрын
There are 2 coolant temp sensors, one for the dash and one for the ECU. I run my M42 on a speeduino as well but wired it into the stock ECU case. Sounds like the board selection is wrong in TunerStudio settings?
@Jz_Janks2 ай бұрын
@@ioijiopjkiopjkp 🤨 that is definitely a possibility, I’ll have my buddy take a look!
@breenkearney92962 ай бұрын
Sounds incredible 💯🤌🏼
@Jz_Janks2 ай бұрын
@@breenkearney9296 good ol sauerkraut CA18😂😂
@DylanFrere2 ай бұрын
Manifold recommendations?
@Jz_Janks2 ай бұрын
@@DylanFrere Tim’s turbo centrium on ig and fb, dude hooks it up
@DylanFrere2 ай бұрын
@@Jz_Janks thanks man
@DylanFrere2 ай бұрын
@@Jz_Janks sorry probably annoying af but where did you get that fuel pressure block off from?