Diesen Mist tu ich mir nicht mehr an. Ich repariere wirklich viele Geräte - aber diese RTX Karten - da sind die MOSFETS draufgeschweisst. Selbst mit 500°C 15 Min rühren die sich keinen mm. Man kann sie tatsächlich nur mit einem Dremel vorsichrig runterschleifen - anders geht es nicht.
@computersrepaircotesaint-l740720 күн бұрын
Not always. Some just shorted. The problem is the board thick and needs a lot of heat
@WindowsrepairMTL2 ай бұрын
Nice video
@canisgee210123 ай бұрын
can you give me the name of the mosfet
@hakimorthopaedics3 ай бұрын
How much is the depth of field on its maximum magnification?
@computersrepaircotesaint-l74073 ай бұрын
Don't really know
@ywengc4 ай бұрын
Sir, can i know what the setting for the heat gun to remove this chip?thanks
@computersrepaircotesaint-l74074 ай бұрын
80% air and 400 degrees . It depends as well on how thick the board is
@aaron715 ай бұрын
Wow... this is way above my head / skill level but I'm sure this is why my AMR5 is dead!
@computersrepaircotesaint-l74075 ай бұрын
Yeh not easy I've been doing electronic repwirs for over 35 hears
@syea36004 ай бұрын
Did you found out a way to fix yours ?
@aaron714 ай бұрын
@@syea3600 Yes, by buying a used motherboard 😑
@syea36004 ай бұрын
@@aaron71 oh nice, an amr5 motherboard or some other motherboard ? I'm trying to fix mine and I'm looking for cheap solutions
@aaron714 ай бұрын
@@syea3600 I ended up buying a used board from China off ebay. Sketchy, but it worked.
@EternalSaber7 ай бұрын
This was very informative.
@computersrepaircotesaint-l74077 ай бұрын
Thank you
@josephmccarthy92287 ай бұрын
Muy buen video, pero como se le quita la tapa del ventilador ?
@chad47667 ай бұрын
Can you demonstrate the camera to monitor lag time?
@NG3X-007 ай бұрын
Would this problem happen again in the same card after being repaired with another MOSFET? any why it goes bad in the first place and does it affect other components in the PCB?
@sicariosoldado-7 ай бұрын
How die you geht the back plate off? Near the CPU?
@computersrepaircotesaint-l74077 ай бұрын
sorry It was 6 months ago, I don't remember
@NewYears9827 ай бұрын
look good
@riderdan659 ай бұрын
Nice trick ! Thanks ! 🙂 I just found your website / channel; will be lurking !
@computersrepaircotesaint-l74079 ай бұрын
Thx. always welcome
@BasicComputerRepair9 ай бұрын
You've got a nice setup. Lots of room to work. My workstation is cramped.
@computersrepaircotesaint-l74079 ай бұрын
Even that is not really enough. I'll need to reorganize everything. It's always a mess, I've been doing electronic repairs for over 35 you always get stuck with space.
@JHAKKOFFICIAL9 ай бұрын
Good job! Just fixed an MSI laptop today doing same thing!
@computersrepaircotesaint-l74079 ай бұрын
Thx bro
@diysolar22529 ай бұрын
IT HELPS ME ALOT THANKS
@computersrepaircotesaint-l74079 ай бұрын
Welcome. I'm glad it helped
@JHAKKOFFICIAL9 ай бұрын
Nice! How much voltage did you inject?
@computersrepaircotesaint-l74079 ай бұрын
You always start from lowest possible which 1 volt but from my experience anything under 3 amp on a gpu you'll not see anything
@JHAKKOFFICIAL9 ай бұрын
what about motherboards? same?@@computersrepaircotesaint-l7407
@StevenF811 ай бұрын
So, this just happened right now. For me Can't really do this Was just playing games. Then Gpu is not working. So when I took it apart, then I saw your video. I was really surprised that it's the exact same mosfet. But yea. This really sucks.
@StevenF811 ай бұрын
Same gpu, of course, too.
@computersrepaircotesaint-l740711 ай бұрын
@@StevenF8 I saw another video with exact same mosfet. so we have at least 3
@samporter1564 Жыл бұрын
*promo sm*
@masterliu1892 Жыл бұрын
I think you need a better gear for video shooting, that lens keeps shaking
@computersrepaircotesaint-l7407 Жыл бұрын
Yeh man, it's not the lens or the microscope its the desk that is shaky
@jonnymakers9560 Жыл бұрын
Hello, how do you have the camera setup to the HDMI port to capture the video? or are you only using USB. thank you
@computersrepaircotesaint-l7407 Жыл бұрын
hi. just connect it with usb
@phalstead Жыл бұрын
What would something like this run?
@computersrepaircotesaint-l7407 Жыл бұрын
I'm in the repair business not in the gaming business so I don't know. But it is a powerful gpu
@robotlegs Жыл бұрын
I think he means how much would it cost
@computersrepaircotesaint-l7407 Жыл бұрын
@@robotlegs For the 3080 it's 350$ CDN.
@BlackstoneOmega Жыл бұрын
AND STILL...THE BEST EVER!
@computersrepaircotesaint-l7407 Жыл бұрын
Dear Stephan, you are the best not me. Thank you dear friend
@Customer22374rt Жыл бұрын
no wonder not even one comment . your channel is useless
@em0_tion4 жыл бұрын
It's not as easy as just opening an HDD cover from the bottom, but it's not a hard job either. I'd suggest if you REALLY want to help people, at least disassemble it live and show viewers step by step how to do it and what to avoid. Otherwise it ends up as a pointless video that just raises up even more questions ;) Just my 2 cents with the hope of bringing some constructive criticism to your attention.
@ionymous67335 жыл бұрын
step 1: skip to step 3. fail.
@taniajohnson1995 жыл бұрын
Not clear view
@computersrepaircotesaint-l74075 жыл бұрын
Yeh sorry to cold to go out
@ivandimov70906 жыл бұрын
what your number i wont a call you!
@computersrepaircotesaint-l74076 жыл бұрын
Are you from Montreal? I'm providing services only in Montreal
@ivandimov70906 жыл бұрын
yes sir,but on the viber.
@em0_tion4 жыл бұрын
По-добре търси помощ в локален сервиз.
@ivandimov70906 жыл бұрын
Can you help me something ?
@computersrepaircotesaint-l74076 жыл бұрын
sure call me
@ivandimov70906 жыл бұрын
Hello.
@computersrepaircotesaint-l74076 жыл бұрын
Hi Ivan Do you need help?
@akanemori11656 жыл бұрын
Can you tell me where the speakers are at and the audio device is?
@linksrepair28517 жыл бұрын
HI THERE,on the title it says Asus F555L Laptop but on your explanation you says samsung laptop,confusing for novice.but good video.