I got a cheap blue kit like this off amazon. It was just the light and the 12v adapter with a switch on it. Had to manually turn it on and off. I like this design with the magnet better except for the wire that could get snagged. My solution is a bit more involved but it looks more factory. The wire for the hatch light is located between the rear passenger door and the hatch. C pillar? Have to remove the passenger side of the trunk trim to access the wire harness. Its a yellow wire and there are I think 3 to choose from. I had to tap and probe to figure out wich yellow wire it was. Once found I tapped into it with a splice T splitter. Same with the ground wire. I ran that to the LED strip and directly to the seal. It turns on and off with the factory hatch LED and there are no wires visible. A bit more involved but it looks more factory and I'm not taking up the 12v socket.
@benjaminjacobson57932 күн бұрын
Bit late to the party here, but I was wondering if I’ve just done something wrong. The sound isolation works but I was under the impression that it would also disable the error message in the car. Is there something I need to fix on my end or does it not actually help with the error message
@GeekMeScott4 күн бұрын
Hi when will this be back in stock? I would love to get this asap.
@AbstractOcean4 күн бұрын
Checking, I think about a week though.
@GeekMeScott4 күн бұрын
Ok awesome thank you
@ricric95216 күн бұрын
Couple things. The knifeless tape seems like a waste of time and money. The tucked-pressed bottom edge makes cutting with a blade very easy. The wood grain pattern comes through slightly on this carbon wrap. The matrix and Alcantara wrap look better
@AbstractOcean6 күн бұрын
The knifeless tape is generally easier to use with the lighter weight vinyl's (i.e. non textured) but we wanted to offer both options. A lot of people are not comfortable using a blade near the car trim.
@georgeking51136 күн бұрын
Can I re-squeegee after a day or so of install? I notice some bubbles
@matt101batty8 күн бұрын
can these still be purchases? Looking for black with yellow accents
@AbstractOcean8 күн бұрын
yep, just not able to have them on the website currently, so they're special order: abstractocean.com/products/rivian-emblems-vinyl-decals
@AbstractOcean13 күн бұрын
Just a quick note that since recording this video, in response to customer feedback, all kits are now either all-Black, or Black and Yellow. We're no longer mixing kits.
@frank11814 күн бұрын
Very nice. Great video!
@frank11814 күн бұрын
Very nice. Well done sir!
@vorsprungelektro17 күн бұрын
👍🏻
@vorsprungelektro17 күн бұрын
👍🏻
@DMattG19 күн бұрын
WHAT IS THIS WRAP CALLED? ALSO WHAT COMPANY
@GeekMeScott23 күн бұрын
Hi is this your company? Where are you all located? By the way great video!
@AbstractOcean23 күн бұрын
We're in the DFW (Texas) area.
@nateboozer27 күн бұрын
Thanks for the video! Glad I didn't open mine. Returning...
@yiujun27 күн бұрын
These are sold out at the moment, will you guys bring more in stock?
@AbstractOcean26 күн бұрын
Yup, should have more stock within a couple of weeks.
@frank11829 күн бұрын
Nice!
@outsidethepyramidАй бұрын
can you just have this in a white light and not animated please?
@AbstractOceanАй бұрын
Absolutely. You can have virtually any color as a static color, just pick from the color wheel.
@JustinBlazzzeeАй бұрын
Do the lights turn off automatically when you leave the car or do you have to manually shut them off?
@tfitzgerald10238 күн бұрын
I have this installed. Looks like it turns off when the car goes to sleep.
@teslatim7820 сағат бұрын
@@tfitzgerald1023so anywhere from 30 min to 4 hours. And not at all when it charging :(
@georgeking5113Ай бұрын
Difference between these and OEM?
@AbstractOceanАй бұрын
Similar construction, but Tesla only sells as a set of two (fronts), as opposed to all four.
@viky004rohiАй бұрын
Great video but would have been better in the night time
@AbstractOceanАй бұрын
Thanks. Agreed, will try to get some nighttime photos, unfortunately I was on a bit of a tight timeline, as I had to get the loaner back to Tesla!
@viky004rohiАй бұрын
@@AbstractOcean all good brother .. my suggestion would like to see more videos if you can on set up on infotainment and ambient light set up
@stuart4176Ай бұрын
Just to update you on this video, Followed your guide and made it easy to install, but my model 3 2022 and installed mine June 2024 and the new kits are being shipped out with everything as one piece including the wiring. So everything up to the front rear seats and tucking the wire underneath the carpet gap is fine, but then you need a T45 male star headed socket to remove both bolts on seat runners to feed the cable under into a loose area, replace bolts back and fully tighten just making sure the cable is not caught anywhere. Feed the wire around the runners to the rear console and continue as per your video. Why they are being shipped out this way I don’t know, but I think there are now version 2 but looks the same as yours.
@robertlinder6414Ай бұрын
How about showing it at night? Otherwise, it is accent lighting
@mkskupaАй бұрын
Love this, but I installed a refrigerator into that back left compartment, and it uses that same outlet. So there’s no place left for me to plug it in. Oh well. Love the idea though.
@jatuur4082Ай бұрын
does the refrigerator take a lot of the teslas battery?
@mkskupaАй бұрын
@@jatuur4082 No, it uses surprisingly little.
@JNGoldАй бұрын
Hi. I am looking to get a set for my soon to be 2024 Model 3. I have read and looked at no less than a dozen Amazon and YT reviews. With all of these products, I am a bit concerned that the rear panels come into contact with the car paint and can vibrate and leave nasty scratches. It looks like the front pair is flush on the inner sidewall, but not the rear panels. I know some say to use a strip of ppf or double sided tape, but I’d rather not have to do that if I can find a set for the rear that doesn’t “wrap around. Any comments? Thanks!
@AbstractOceanАй бұрын
It's not an issue we've ever had reported, having sold many thousands of them, but we have for sure had customers put a bit of tape, PPF, VHB etc between the mudflap and the paint to help protect things. We switch out accessories all the time on our Tesla's to test things, and have never noticed an issue, but it's also rare we hold on to a car for more than a couple of years.
@JNGoldАй бұрын
Mine is a lease so I need to be a bit careful. Can you recommend a tap that might be ok to use on the paint?
@AbstractOceanАй бұрын
@@JNGold Just return with the mudflaps installed, or even if you don't, Tesla really don't care on lease returns. In terms of the tape, even something like electrical tap will do, but if you want to buy something, either a small piece of PPF or foam tape, something like this (weather stripping) will do the job: amzn.to/4bS6jy6
@thekings8964Ай бұрын
Who makes them?
@blakeworkman755921 күн бұрын
Can we please have the link for these??
@SlotswithTodd2 ай бұрын
Can’t find the app to control. It’s called just LED? In the apple App Store? Do you have to pay for it?
@AbstractOcean2 ай бұрын
It's free, there's a QR code that will link you on the controller module, or visit our help page for the links: help.abstractocean.com/en-US/full-color-animated-dash-led-light-strip-for-tesla-model-3y-325734
@ChiBulls3102 ай бұрын
WOuld you mind post a link for the "pigtails" thank you!
@AbstractOcean2 ай бұрын
Sure! abstractocean.com/products/extension-cables
@adca5402 ай бұрын
I bought it and unfortunately I can’t return it as I’ve had it too long. I won’t be installing this, looks terrible.
@Banana699992 ай бұрын
Do you have white for a 2024 model y?
@BILLSIRLOIN2 ай бұрын
Thanks for the video. Look like I’ll skip on this accessory unless they improve it one day
@o7511062 ай бұрын
1st😁
@misterlhaynes38362 ай бұрын
ridiculous, i'm not considering doing this let alone thinking about it after this install debacle, its a truck, I'll use it different vs show, my shizzle will be dirty
@YoutubePremiummmml2 ай бұрын
No warranty Will be broken?
@AbstractOcean2 ай бұрын
No. It's just a USB device (power only) as far as the car is concerned.
@davidr35692 ай бұрын
Can you please make a version of the center console light strip that goes around the whole center console and not just the sides of it?
@AbstractOcean2 ай бұрын
I'm afraid not. I mention why in the video, the turn radius at the top is too tight for the micro-LED strips that we're using. The older fiberoptic 'light-pipes' will get around there, but we don't sell those, as I don't think they look particularly good.
@djextreme772 ай бұрын
Hi. These rimsavers will last sticked on one year at least? Thanks
@AbstractOcean2 ай бұрын
For sure, much longer than that. We have very limited stock at the moment though, more coming soon.
Hi, the kit looks great. Does it work with right hand drive model y and if not, why not? Hope it does because I want it.
@AbstractOcean2 ай бұрын
It does, just the USB hub (Cyber hub) will not, as the glove box on RHD cars is reversed (of course), but also a different shape.
@gregoh54702 ай бұрын
@@AbstractOcean Thanks for the reply. I have already got your puddle lights and footwell lights. Delighted with them. Just two final questions before I place my order with you for the ambient dash lights. Can I plug straight into the Usb port in the glovebox without using the cyberhub If i decide not to use sentry mode? Secondly if I do decide to use sentry mode can I just get an extender cable for the Glovebox usb port and simply plug in the hub that way and leave it loose in the glovebox. I could tape it down or something like that to secure it. I'm not worried if it isn't neat in the glovebox. Thanks, Greg
@AbstractOcean2 ай бұрын
@@gregoh5470 Yes to all of that, we've had a few customers in the UK do that, and glove boxes are the equivalent of a junk drawer in the kitchen, not meant to be neat! You might already have a USB hub lying around somewhere too; the lights are not fussy, but the sentry recordings tend to be a bit picky, but extending the hub that they ship with will be fine, just be sure to use a USB-A 3.0 extender to maximize the data throughput. Also, just FYI, they're on pre-order at the moment, we expect more stock to arrive on Apr 29th, so everything will ship next week.
@gregoh54702 ай бұрын
@@AbstractOcean Excellent thanks for the reply again. I've just placed my pre-order. Greg ,Ireland.
@Arunnkhem3 ай бұрын
Would be better if one could actually order it😊, getting a page not found on the link provided
@AbstractOcean2 ай бұрын
Hmm, both the links are right, they're working. Not sure what was up at the time, but either way, all good now.
@mitchellbarnow17093 ай бұрын
Pete, a great install and the final product really does look good! Thanks for the demonstration.
@wh97713 ай бұрын
Will the heat and air condition make the light over heat or moisture? Thanks really love it and want to buy
@AbstractOcean2 ай бұрын
Nope, no issues, no matter how hot or cold you like it :-)
@wh97713 ай бұрын
Im from canada. Just found out you guys today. I will order from uou guys to give a try. I like you said you pay what you get.
@johnrogers14233 ай бұрын
None of the three bolts adjacent to the switch on my January 2020 Model 3 went to ground. The solution was to join the ground wire to the Tesla's black wire that went to the existing light.
@@AbstractOcean do you have one flat without the grooves and stitches on the top?
@AbstractOcean2 ай бұрын
@@babouin1977 Not currently for S/X...sorry.
@babouin19772 ай бұрын
@@AbstractOcean ok . thanks for replying.
@fredblbs3 ай бұрын
Ive been looking for a nice seemless solution to an ambient light strip. This looks perfect! One quick question for you.... Ive heard the USB hub that the kit comes with, doesnt play nicely with the Samsung T7 SSD... have you heard or done testing with that? TIA
@HoosierGeorge3 ай бұрын
This should fit a 2023 model 3, yes ?
@AbstractOcean2 ай бұрын
No, you'll need this version: abstractocean.com/products/m3-sill-protectors-trunk-frunk-protectors
@sairangineeni3 ай бұрын
Does changing the puddle light impact the window bases on what I have seen on reddit?
@AbstractOcean2 ай бұрын
No. We cover what happens, and why, in our FAQ here, but TLDR, not an issue at all, if the bulb is designed properly. help.abstractocean.com/en-US/ultra-bright-led-puddle-lights-for-all-models-105626
@Boomtendo4tw3 ай бұрын
Looks like some grip tape
@AbstractOcean2 ай бұрын
Basically, yeah. So far it's holding up ok, but it's not worth it.
@HwangInhoBooNam3 ай бұрын
What did I just see…?
@itchynackers3 ай бұрын
wtf a bumper protector? does that even make sense? you may want to buy those rubber tire protectors too. or windshield wiper cleaners.
@AbstractOcean3 ай бұрын
I guess the theory is you'll use the rear bumper as a step, so it'll protect/provide a non-slip surface, but in reality, it's lame, and doesn't seem like it'll last, but we'll see...