Thank you so much. It worked for me.

I bought an Ender 3 V3 about 2 weeks ago and it has been the most Pleasant thing I've ever had in my entire life. For halloween, I ended up getting an Ender 3 V3 Plus for $1.15 more than its smaller brother so I ended up returning the regular V3 model and will be keeping the V3 Plus. Remarkable printer, remarkable software, and remarkable experiences so far. This is my first and well, now my second 3D printer and I would highly recommend either model. I should also mention that I purchased this for my business so that I can manufacture parts on the dime and on the whim for much cheaper for some of the custom work that I do. For me, I use it to make money, and I typically keep this printer running 24/7 constantly manufacturing parts that I need for my company. I even connected it to a 1500VA APC for more uptime when the power flickers.

Any case/enclosure/cover recommendation for Neptune 4 Max? Is there an option I can print it myself in pieces and assemble?

Does camera work if internet is out?

What about the issue of wheel wear, linear rail upgrade?

Not bad. Did you ever tried the Pulsar Gaming Gears XBOARD QS?

Thank you for the content!

Do you know how to send the print directly to the printer? I have creality print hooked up and can monitor the print there, but is there a way to wirelessly send the exported g code from Orcaslicer to the printer via wifi? Right now i am just shuttling the gcode via a thumb drive. thanks

nerf torrent? more like nerf torment cuz this is a hot piece of plastic garbage. Dont buy this blaster due to following reasons: 1. the darts are the worst on the market 2. this blaster has mag compability issues 3. the prime of the blaster is disgustingly crunchy 4. the trigger pull is really stiff 5. its just to expensive

one thing to perhaps mention is that if you have an apple watch the touchID key is useless

my z offset keeps changing

I’m just here to get the low down on the ams and it’s advantages. Although I did found out you are pretty awesome.

What do I do if the whole thing won't turn on? The screen included, I opened up to check the motherboard and there isn't any indication lights, wondering maybe I blew a fuse

Yes it’s my fist printer and wanted to print some larger Props and Cosplay stuff. It’s not a great experience so far. Bought it around March. Started printing some Test prints and i couldn’t get the First layer to stick especially in the outer part. Only way to fix it was printing in 5 mm the first layer and even then it was not sure if it would fail. Fast forward ,got a blob of death one time, couldn’t print, Elegoo sent over a new hotend, haven’t printer since that till 2 weeks ago and the first layer was bad all over the place, peeling of, not sticking together etc.😤😤. Have tried everything i cloud find online nothing really helped 😢.

Hi great video. I have the 2c cameras and home-base. Would u know if my 2c cameras will work with the new homebase ? Either s380 or S3 Pro 3 homebase and camera. Thx for any help.

Hey I have a MAX 3 ….does most of the max 4 stuff apply to that aswell ?

this is so much more complicated and tedious than I expected 3d printing to be without even getting a 3d print out of it

I have only recently discovered it but I agree 100%. Best filament I've ever used.

Just found your videos. My 4 max isn't pushing filament. The wheel is spinning but nothing is coming out. at first I thought there was a clog but if I push on the filament it comes out and prints just fine as long as I'm putting pressure. I found this out after I bought a replacement nozzle kit. Is there a tensioner or something on the direct drive feeder or is the feeder stripped out?

You can pull out the nozzle, as shown at the end, without any of these steps or a screwdriver. Just put on the bottom slightly with your finger. Mine was used for nearly a year and came right out.

I’ve been using a different filament on Amazon that has been incredible.. it has a weird name tho that I can’t remember right now but it’s been great for $13-$14 a roll.. I recently JUST switched to Elegoo PLA + because my normal high speed PLA that I swore was the best ever for the money was always out of the colors I needed on Amazon. I am super excited to try this new Elegoo PLA+.. the reviews say it’s top notch and I bought a 4 pack multi color packs with ALL 4 colors I was needing for just over $10 a roll! You can’t beat it! And if it prints as good as everyone says it does or even as good as my last go-to filiment then I’ll be VERY happy.. as they offer better colors more consistently AND I’m saving $3-$4 PER roll!

how about pausing it and then failing to resume (filament loading but head stays in place after resume)

Nice commercial!

I buy those spools in 4 packs regularly. They're simply the best deal there is.

01:22 10 days with backlit, not 10 hours.

Have you tried their ASA (or ABS) by chance? That's mostly what I print and there's a lot of variance between brands.

In Australia the cheapest price is $80, if it was $40, I might consider it. But then you also need alexia, which requires an amazon prime subscription. Which adds to the price, so probably not some thing I would buy!

I have tried all of the Elegoo PLA and PETG filaments (although more like 30, not 300 rolls) and love it. I've tried Inland, Jessie's, Protopasta and Prusa and you can't beat the price. Quality is always the same on every roll.

Agreed. Although for the extra pennies I use their pla+. Never had an issue on Neptune 4 plus.

New to 3d printing. I've been using orca but want to try Cura. I downloaded this but can't get the slicer to see my Nep 4 max with the ip address. Also wondering if Elegoo's nozzle parameters will work for this version. The support site mentions cura 4.8 only.

Get 20% discount code 【20DESLOCdtt】. Code valid on Amazon till November 10th. Amazon link: amzn.to/4ePaahj

After a few tests and spending like 3 hours leveling, it seems to be going well! I am still not ing some stringing, though. More thend id like. What is the process for fixing that? Should i decrease the temp and increase fan speed? My first benchy, with the exception of 2 drag marks, turned out nearly perfect besides the stringing. Which a lighter took care of.

What profile do I use for the neptune 4 plus? tia

Hi thank you for the video, it really helped a lot. Done every thing as suggested for my 4 MAX and print for a month with no problems...yesterday when trying to print I get the message "Printer starting please wait" and no print.. tried to re-installing the same firmware (the last one available) and nothing ..Opened a ticket with Elegoo support ..any idea?

Use the EF to Rf adapter and use my 10-22 EFS lens

Super useful thanks for the video. I have a Neptune 4 max printed great at first, but now it drags filament around and most prints are spoiled on the first 1-5% of the prints. Anytime would be appreciated. Thanks!

What kind of pc do you need for running prusaslider? My n4 pro will arrive this Monday but I have no pc, only an iPad..so I guess I must buy one? I did saw a free slicer app for the iPad but no n4pro config. So where can it be found? Can an N3 pro configuratuon used for the n4 pro? Any help is welcome

When I was loading filaments on my new AMS,the printer was going all the way to the right and I heard a sharp snapping sound. Any idea what it was and why? I got the printer for my birthday last month and got the AMS just a few days ago so still unfamiliar with everything.

where are the links to the orca profile?

So I do not see the link for these spacer you talked about.

Didn't they have some terrible coverage on the news recently?

Do you have the link for the silicone bumpers?

Question on the bed levelling. What column of numbers am I supposed to look at and when? There are 6 columns and some are in dark colours and others are in lighter colours. I haven’t found anything on what that means so I’m flying blind.

Question on the bed levelling. What column of numbers am I supposed to look at and when? There are 6 columns and some are in dark colours and others are in lighter colours. I haven’t found anything on what that means so I’m flying blind.

I’m new to 3d printing by like a week. I’m using orca slicer and followed your tips on the newer video for bed levelling. I’m curious if printer profiles have improved? I’m using what was recommended for Neptune 4 max by orca.

Great video. Just got the printer in and plan to setup tomorrow. I understand you did the silicon bumpers but are there any other upgrades you have done. Ive seen people talk about the linear rail upgrade and am curious if thats even needed since you are saying you havent had any issues lately. Thank you.

Hi David, nice video! Will this auto transform into a short later when they actually enable these 3 minute lengths? Are you also posting these on TikTok?

Coolllllll !!!😅

Don't be fooled by the Eufy cameras. The video it saves to the SD card can't be transferred or stored off the app. If you try to connect it to your computer, it will be encrypted and you can't access the files. Eufy support told me that my only option is to use the playback feature on the app and screen record the video using my phone. Yes. They want me to screen record 12+ hours of footage every day in order to store it onto my laptop.