@@dragthis2006 no illinois does not require title for engines it does have a serial number on it though. Thanks for the comment!
@DCFloridasport8 күн бұрын
Good video, even the new Suzukis come with a sheet that says to fill the bucket 10" from the base of the powerhead, just a lesson to learn I guess
@bongodrummer691416 күн бұрын
TOO WHITE
@kickinwithben498216 күн бұрын
I got the same 12 and my only regret is i should have gotten the 18
@janicecraumer3916 күн бұрын
Just got my upper today from my dentist, not good they are thick, getting food under them,not good suckin not standing in way to high up
@timhuggins936615 күн бұрын
@@janicecraumer39 i ended up usin fixadent on mine.
@TraditionsofEastTennessee19 күн бұрын
Im thinking on it myself.
@curtismay207622 күн бұрын
Thanks for posting this! Seriously I have a new out of the box 18hp that cost 1,330 dollars. Tried muffs and a low 20 gallon storage tub filled and only immersed to just over the lower plate. I'll get a large deeper trash container size to hope it gets it going.
@reginahailey415023 күн бұрын
Thank you Sir 😊
@user-cj8bh3eo2pАй бұрын
Any bone loss? Can’t tell. Aesthetically speaking, you look great.
@grant31781Ай бұрын
Do you know how much this engine weighs? I don't trust the spec sheets online. I have a 14 foot porta bote with a 52 pound 6 hp Suzuki 4 stroke. Weight limit for the motor is about 60lbs. Do you think this engine is putting out more like 10 hp since it is the same cc as a 9.9 Tohatsu 2 stroke? The Tohatsu is supposed to weight 57 lbs. With my family in the boat the 6 is pushing us around 10 to 11mph. Really not bad for 6 hp. I has hoping to get the closer to 15mph.
@timhuggins9366Ай бұрын
@@grant31781 yeah the 12hp weighs between 65-70 pounds if i remember correctly. Thanks for the comment!
@AbiNisaDoelАй бұрын
Two stroke always works
@ronpezzulo7615Ай бұрын
Where can you get parts if you need to change the impeller
@timhuggins9366Ай бұрын
@@ronpezzulo7615 mine came with 2 extra spark plugs, and an impeller that the manual said to change at 100 hours of use i never had to order parts but there was a website in the manual. Thanks for the comment!!!
@captain-Ricky-BonesАй бұрын
How many hours should it be broken in? I just ordered mine.
@timhuggins9366Ай бұрын
@@captain-Ricky-Bones bout 10 hours total, the manual said idle for 10 min, run a 1/2 throttle for 5 hrs, 3/4 throttle varying rpm for the next 5 hours. Gas/oil mix at 25 to 1 for break in after 50 to 1 i ran 40 to 1 and it did fine. Thanks for the comment!!
@captain-Ricky-BonesАй бұрын
@@timhuggins9366 Thanks Tim. i appreciate your help
@captain-Ricky-BonesАй бұрын
@@timhuggins9366 Got it! SO it says all that in the manual?
@timhuggins9366Ай бұрын
@@captain-Ricky-Bones yep sure does!
@captain-Ricky-BonesАй бұрын
Do they come with Serial number and MSO documentation to get it titled?
@timhuggins9366Ай бұрын
@@captain-Ricky-Bones they do have a serial number, but no paperwork for a title, or origin. Thanks!!
@aostroskyАй бұрын
Can't file it down or anything? Wonder if you can boil them
@SbensonnАй бұрын
At the end of the day AD being a franchise it's a 50/50 chance of having a really good dentist or a really bad one.
@hermannugent4279Ай бұрын
Is your Hanhkai still running good?
@timhuggins9366Ай бұрын
@@hermannugent4279 yep did a 3 year review video just before i sold my boat with the motor, ran great the entire time i owned. Thanks for the comment!!
@larryalexander4833Ай бұрын
Hello i have watched your other videos and other videos on this brand outboard. I have to register and title our outboards separate from the boats in SC. Did they send all the information and title or mso title of orgin when you purchased it ?? Appreciate any information. Where di you purchase yours ?
@timhuggins9366Ай бұрын
@@larryalexander4833 bought mine off of amazon, it did not come with any paperwork it had a vin # but no actual origin of manufacter or anything.
@DireNeedsАй бұрын
Thanks for the video. Because of the price I've had some interest in these motors and it looks like they could be a decent buy.
@timhuggins9366Ай бұрын
Had mine just over 3 years and it ran great! Good luck!!
@MeatnewdadbodАй бұрын
How much faster would you say the hangkai is
@Mma-basement-215Ай бұрын
Brother the ones from your dentist look great wow im super impressed !! I need to get a good pair of dentures
@blakemason4535Ай бұрын
@timhuggins9366 thinking about buying the 12hp or the 18.. love to go out to Canton lake on my 12ft.. live in Bartonville
@timhuggins9366Ай бұрын
@@blakemason4535 thats awesome! I had mine a little over 3 years never had any issues i used the break in schedule in the manual, put lower end oil in it wen i unboxed it and it was great! Thanks for the comment!!
@zachgray319Ай бұрын
At certian rpm can u fix to set rpm speed to troll
@daltonmantz2203Ай бұрын
Thank you sir!
@johnmonkey18742 ай бұрын
These smokers are garbage. Especially the 3016DEW model. The digital controller is garbage and the readout quit working in about 4 years with very little use.
@timhuggins93662 ай бұрын
@@johnmonkey1874 Hey man it happens sometimes people just a bad one ive had mine 7 years now and still working fine. Thanks for the comment have a good day!!
@4000jrock2 ай бұрын
What replica is this of for parts is it the Tohatsu 9.9 thanks for any info
@timhuggins93662 ай бұрын
@@4000jrock Most say its a replica of the 9.8 Tohatsu i havent had to order parts so im not 100% on it but thats what ive seen from videos, and posts. Thanks for the comment!!!
@andyacker9912 ай бұрын
Thanks for posting that. I've been a dentist for 37 years. I love making beautiful, bespoke, customized, well-fitting dentures. It's an art. Most of the patients I make them for bring in a "discount denture", or two, or three... Patients who've never had a properly made denture think it's gonna be done in one or two visits, because that's what they got before. But when they finally get a denture that looks great, functions well, and is comfortable, they don't mind the 4 or 5 visit process. And they send their friends to me. I'm basically booked out until I retire. Pretty good gig for an old Deadhead hippie. I love doing dentistry! We play great music too. Otherwise, I'd stay home with my Czech German Shepherd, Bodhi the Superdog. He is probably the finest dog that's ever existed in the history of Dogdom on Earth. Sometimes I bring him to the office with me. But he usually wants to stay home, watch TV, and nap while I "Go To Work". He's such a good boy!
@norhishamkamaruddin70692 ай бұрын
Are u sure from Japan????😅😅😅😅😅
@timhuggins93662 ай бұрын
@@norhishamkamaruddin7069 lol yeah i actually commented right after i posted this they are made in China. Lol it happens.
@AGuyFromHazard2 ай бұрын
Just picked up the 12 hp for $889 on amazon shipping and yax included. These are Tohatsu M 9.8B clones so most parts should be interchangeable from what I understand. I did hear another owner say the rubber parts dont hold up well over time they start leaving residue when touched
@DanielGrows2 ай бұрын
Can you share the link? Cheapest I see is little over 1k with shipping.
@dr.seanmcanarney73742 ай бұрын
Sounds like you have a rock solid dentist watching out for you!!!
@brooks40482 ай бұрын
Chinese junk.
@user-nx6qr1mt6f3 ай бұрын
At 61, I still have all 32 teeth. Like dentists say: “if you’re sick of caring for your teeth, just ignore them and they’ll go away”
@timhuggins93662 ай бұрын
Unfotunatley its not always that simple, my issue is the medications ive had to take most of my life at least thats what the dentist told me he said there was nothing i could do he was really understanding, and didnt play the blame game.
@user-nx6qr1mt6f2 ай бұрын
@@timhuggins9366 Oh, sorry, I never knew meds would do that…
@ThatOutdoors3 ай бұрын
How does that thing push that boat?
@timhuggins93663 ай бұрын
Pushed mine about 16 mph but thats also with the motor lower than it should be, the bottom cavatatiin plate should be even with the bottom of the boat mine was 2 inches lower so it wasnt gettin the most out of it.
@scotty3621003 ай бұрын
It doesn't matter what the name of the place you go is - is they don't care/know what they are doing, the dentures will suck! I just wasted 3,000.00 at a "professional dentist" for dentures that I can't keep in my mouth more than 10 minutes, I can't swallow, or open my mouth they are like horse teeth in my mouth. Affordable. Aspen, Dentist, it doesn't matter the name, they have to know what they are doing! I would trust AD since it is ALL THEY DO by the thousands, than a dentist that does a set one every few months or a couple sets a year!
@johnsavage11093 ай бұрын
Thanks Tim I am in Australia where everything is..........expensive. My sister (80 yo) just had a new upper plate made for $5,600 , and she is not happy with them. I keep telling her to go back until she feels comfortable. Only last week I had a new top plate fitted with 5 teeth on it (I was a bouncer for 7 years back in the day). It felt and looked good when fitted but next day I was very sore. I went straight back next day (3 hr drive) and he messed around some until I thought it was right. Anyway, long story short, I ended up sitting in my shed with my little dremel and fixed it myself. It really was very easy and I now don't even know I am wearing it. I eat apples with Gusto. Cheers and thanks for sharing....
@timhuggins93663 ай бұрын
Thanks for the comment!!! Grettings from Illinois, USA!!!
@eylemmahmutoglu3 ай бұрын
appreciated
@nicholascreekmore40233 ай бұрын
Did you get a title so you can tag it?
@timhuggins93663 ай бұрын
No it did not come with a title, my mercury didnt either i just got a copy of the origin of manufacture.
@larryalexander4833Ай бұрын
Did it come with it or did have to request it separately? Any issues registering yours?
@timhuggins9366Ай бұрын
@@larryalexander4833 never had to register the motor just my boat it had a vin # on it i used to put insurance on it. Thanks for the comment!
@nancyhavens35093 ай бұрын
My daughter was 20 years old when she went to Affordable Dentures amd and had all her teeth pulled due to lack of enamel. The immediate dentures fit good & she wore them for 13 years without having them relined. So, she had an excellent experience. I am 78 in& just had my upper teeth extracted on 5/9/24 and my dentist had my immediate denture made at a lab he uses. They fit terrible, almost like they belong to someone else. The front teeth protrude too far, the gums on the side show toouch as in your photo on the one from Affordable Dentures. Plus, I can't get the denture centered. .They are loose, and causing my gums to be sore on one side, plus my ear & jaw on right hurts at times. I think they are too far off to be able to adjust. I really do believe the problem was in the tray sixe they used cause they couldn't find one to fit my mouth & used a child's.
@tapinwithted3 ай бұрын
Any more updates?
@ramblingbill91013 ай бұрын
One thing to point out is you went with the Economy version from Affordable. These are basically their temporaries which are meant to be used while you heal. With Affordable I went with the Premium level. So I wore the temporaries for 8 - 9 months. When fully healed and gums stopped shrinking I was then fitted with a final set. For the final set they spent lots of time measuring, fitting and customizing. They are very thin and fit perfectly. Very happy with them - they look like natural teeth. I had full dentures upper and lower at about $2,300.00. (Insurance paid $900 of this). This included temporaries, finals, relines and adjustments as needed for 18 months. My 22 extractions were extra but for me that went extremely well and I had no pain - just tenderness - I was lucky. Now my dental tech at Affordable has 25 years experience and she is great - so this might have to do with my success in the fitting and process in general. I am extremely happy with dealing with Affordable and people really have no idea I have dentures unless I tell them. Oh and I can eat anything - there is a learning curve.
@AllIKnowIsPainAllSorrow2 ай бұрын
HI. Hope you can respond. Right now I have medicaid so no dental. Did you have any bone or jaw loss, infections etc?
@sondrapatty3504Ай бұрын
@@AllIKnowIsPainAllSorrow All dentures cause bone loss eventually. If you don't get ones screwed into your jaw/or the all in 4. Bone graft help but like I said eventually it will happen. Age also plays how fast or slow it will happen. 😊
@Straightbangin19793 ай бұрын
It's not really a matter of chain location vs private dentist. It's a matter of what materials they choose to use and how skilled the denturist is. Some chains use better materials than private dentists.
@stephengalvan77223 ай бұрын
Just want to know how that motor is holding up
@timhuggins93663 ай бұрын
Just did a 3 year review, still running good!
@timhuggins93664 ай бұрын
Well that was my last Hankai video sold my boat last night and got a 2015 Tracker Super Guide V16 SC!!! Thanks for all the support keep watchin for more content!!!
@VHGbham3 ай бұрын
Grats, sir! And thank you for the info on the Hangkai! I'm motor shopping for my Bantam 2X, and this is a huge help!
@daltonmantz2203Ай бұрын
Thank you sir!
@eathonbeeman11284 ай бұрын
Still got mine. I use it through the winter and summer. Still runs like a champ. I was waiting on ur 3 year video
@timhuggins93664 ай бұрын
Yeah weather has been horrible raining everyday since it got to 65 degrees. Thanks for the comment!!!
@eathonbeeman1128Ай бұрын
@timhuggins9366 my cousin just bought the 18hp. These little engines ain't bad at all. Haha we run ours everywhere with no problems
@jaydub28884 ай бұрын
Just got mine today for $800.. cant wait to play with it tomorrow
@timhuggins93664 ай бұрын
Thats great!! Make sure to add lower end oil to it!! Congrats!!!
@jaydub28884 ай бұрын
Just bought this for $800 12hp, break in tomorrow
@abner091619924 ай бұрын
i got teh same one they are really good motors for the price
@timhuggins93664 ай бұрын
Absolutley! Its been a really good motor cant beat the price!!
@xrigtrk4 ай бұрын
My first pair of dentures was from AF about 14 years ago I got the economy they where excellent, I just got a new set from AF a little over month ago,no problem, I would like fot them to be brighter, but really no problem.the new ones are the next grade.
@timhuggins93664 ай бұрын
I have no doubt location is the biggest problem the one i went to was just bad.
@davidparks64444 ай бұрын
where do you put the muffs on at
@timhuggins93664 ай бұрын
I use a garbage can, but the muffs go over the draw vents under the bottom cavatation plate. Thanks for the comment!