Пікірлер
@LegacyDriver1 11 күн бұрын
This is genius.
@ericbaker475 8 ай бұрын
How do you take the cupholder out to reupholster ?
@LosProduction2006 9 ай бұрын
How long were the staples u used
@padredon7 8 ай бұрын
Senco brand 3/8" crown staples. 1/4" long.
@portermore3864 Жыл бұрын
Excellent
@mikedeboy697 Жыл бұрын
I removed the entire top of my console , 3 fasteners. Took less than two minutes. Then you can work on it without drilling.
@jonahbagley904 Жыл бұрын
Please could you explain in more detail, I'd like to get at the actual cup holders to see if I can modify to fit nalgene bottles, thanks!
@ebehrman 2 жыл бұрын
Excellent job, looks fantastic. My 2004 F250 is doing the same thing.
@shaneable1 2 жыл бұрын
Thank you. This video was very helpful!
@rongrey2110 2 жыл бұрын
Wish you showed the stapling job!
@padredon7 2 жыл бұрын
Yeah, me too, but I didn't record it. Somewhere in the comments there are details on the type of gun and staples that were used though.
@jimdunne1900 3 жыл бұрын
Best. Idea yet for removal and replace without damage! Great explanation and detail!
@unclejoe6811 3 жыл бұрын
They sell replacements on eBay for $15 now
@IJUSTWANNAFLYDJIDRONES71 3 жыл бұрын
I bought the hard one on Amazon….I completely broke away that plastic white base and the plastic piece snapped right in perfectly…..2007 F150……..even if the clips break in place just push them through and snap in the new plastic piece.
@RogueCorps 3 жыл бұрын
Great video, thank you! My '04s has been pulling up for years. I just made the mistake of drilling two of the back holes on the wrong side, so a couple extra.
@RogueCorps 3 жыл бұрын
Thanks again! I just refastened my pad to the frame using UV Light Glue. I started with corners and edges and eventually the whole perimeter, no staples used.
@harleygould7255 3 жыл бұрын
So, they apparently changed the locations of the stupid clips every single year, and you can waste a whole day trying to find and keep the clips, but frankly, my time is better served simply ordering a replacement padded cover. I'm not real happy about carving up the piece I need to hold the pad down, as well as parts of the rest of the flip seat.
@padredon7 3 жыл бұрын
Sorry to hear about your experience. My video applies to the 2004 model. I don't know about any other years.
@scottchristian4549 3 жыл бұрын
Mine has been lifting up for a few years. I remember seeing a replacement on eBay a few years ago but it was pricey so I waited. Now an ABS plastic replacement is available on Amazon or eBay that can be had for less than $20. Different colors available. For that price it's worth a try, but it's not a soft vinyl feel. Once I have it I may try to repair the original.
@fliguy43 3 жыл бұрын
Electric stapler?
@padredon7 3 жыл бұрын
I used a pneumatic upholstery Staple Gun with Senco brand 3/8" crown staples, 1/4" in length.
@xxraydogxx 3 жыл бұрын
Man great video ! I’d have to say the stapler idea was amazing! Tried the hand one didn’t have enough to get through that plastic. So went to Lowe’s and got an air one with t50 staples worked like a charm. Great vid helped a lot ! Had to pause it a few time cause you wouldn’t sit still haha ! Thanks man !
@ironman2232 3 жыл бұрын
Yes Sir...I found your video...marked it out...had it off in 15 minutes
@mattmatheson239 3 жыл бұрын
Good as new now. Thank you! I broke 2 clips removing it but the piece snapped back fine.
@4joslen 4 жыл бұрын
Awesome, Thanks for posting
@scottyoung7324 4 жыл бұрын
Don't fall for this! Chances are it will not work!!! THEN YOU WILL BE STUCK WITH A CONSOLE WITH NO PAD! Plastic breaks, staples will not go through it or it will not stay in place after!
@padredon7 4 жыл бұрын
I guess I and others were lucky to have used the right staples and staple gun. Mine did not suffer a single crack or broken clip. Sorry to hear that your repair was unsuccessful.
@ericharris3379 4 жыл бұрын
Thanks for this video. It made this job so much easier. I used Permabond 102 Instant Adhesive instead of staples. Hoping it holds up well.
@denvergraham7387 4 жыл бұрын
What gauge are the staples you used? Were they 18?
@denvergraham7387 4 жыл бұрын
Actually are they 20 or 22 gauge
@padredon7 4 жыл бұрын
Don't know the gauge. They were Senco brand 3/8" x 1/4" long upholstery crown staples.
@DustinDavis 4 жыл бұрын
I got the backing off by drilling the holes. I only broke one clip. :) But then I tried to staple. My hand stapler did nothing. I got out my pneumatic stapler and it broke the plastic all to pieces. :( Not sure what to do now.
@DustinDavis 4 жыл бұрын
Super glue worked surprisingly well
@padredon7 4 жыл бұрын
Bummer. Another guy had similar results. Not sure why (maybe the staples) but mine and others stapled perfectly. Glad the glue worked out.
@ricardofogel671 4 жыл бұрын
I'm going to try that.
@luisbarriga7491 4 жыл бұрын
Welp.. everyone of my clips pointed the exact opposite direction resulting in breaking half of my clips. But hey atleast it's out now
@padredon7 4 жыл бұрын
That's odd. Sorry for your results.
@luisbarriga7491 4 жыл бұрын
@@padredon7 No worries, I was able to glue the leather back on and plastic is still sturdy. Looks like new
@makeamericagreatagainI776 4 жыл бұрын
What a wonderful video thank you! I took that piece of shit foam off then cut and routed a piece of oak myself.... now everyone I know with this model wants me to do theirs. Again thank you for relieving a headache
@wallyrod1951 5 жыл бұрын
Thank you for posting this video it sure will help thanks
@luisivan1 5 жыл бұрын
Great detailed information. Thank you!
@shonmchugh9002 5 жыл бұрын
How did you get the padding off? Did you just pull it off?
@padredon7 5 жыл бұрын
Yes. Just stretch it as needed to pull it of. No glue or fasteners were used in its manufacture.
@shonmchugh9002 5 жыл бұрын
@@padredon7 thanks im going to work on mine tonight. One last question. What size staples did you use? I keep picturing stabbing myself when I rest my arm on it.
@padredon7 5 жыл бұрын
@@shonmchugh9002 Senco brand, 3/8" crown staples, 1/4" length. No risk of being stabbed.
@shonmchugh9002 5 жыл бұрын
@@padredon7 thank you!
@stuartknowlton9266 5 жыл бұрын
Great instructions for removal! Took about 10 minutes start to finish. chose to use the single plastic piece for replacement. Very easy.
@brandonscott2684 5 жыл бұрын
I have an industrial staple gun and they just bounce right off the plastic lol
@padredon7 5 жыл бұрын
Don't know what brand staples you are using. I used Senco brand upholstery 3/8" crown staples, 1/4" length.
@brandonscott2684 5 жыл бұрын
how the hell did u get those staples through the plastic?
@padredon7 5 жыл бұрын
Went through like butter. No breaks or cracks. Senco brand, 3/8" crown staples, 1/4" length
@busybody1474 5 жыл бұрын
Just snap that garbage off... Use it as a template and make yourself a nice one out of wood
@brianshipman6943 5 жыл бұрын
Heck yeah it helped!
@not_today_satan_7 5 жыл бұрын
Do you know how I can reupholster my 2005 f150 front seats?
@crawdaddct 5 жыл бұрын
Thanks man, you had the best repair video I found. My only issue was my plastic was so brittle the staples just shattered the right side of it. Still was able to get it done with my air stapler. Definitely improved. Thanks again.
@badgerstatebaits1256 5 жыл бұрын
KORDEL
@nathanschiermeyer6555 5 жыл бұрын
Awesome. I used loctite instant adhesive. Working great so far. Nothing I had would staple thru the plastic
@nathanschiermeyer6555 5 жыл бұрын
Loctite 414
@insidethemindpi 4 жыл бұрын
How has it held up?
@nathanschiermeyer6555 4 жыл бұрын
@@insidethemindpi extremely well. No movement or change. Pickup sits outside all winter and summer. So extreme heat and cold. Still in tact.
@randyblendz1064 5 жыл бұрын
Does anyone know where to buy the padding part
@alangross2277 5 жыл бұрын
Thanks! My '07 is starting to lift on the left front corner.
@gabel1661 5 жыл бұрын
Just fixed mine. Thanks man
@funkcrewbandonly1 5 жыл бұрын
Thank you man for this video. You really helped me out with this because because i didn't want to tear it up the other day when i tried to see how it comes apart. Thanks again👍
@metroplexchl 5 жыл бұрын
I am trying desparately to find a video showing how to disassemble the entire cupholder and interior of the console? Did you just use a pry tool to pop off the cushiony cupholder surround?
@padredon7 5 жыл бұрын
You need to peel back the edges of the padding and remove it. After removing the padding, follow the instructions in the video to remove the backing structure that attaches to the console. I have no advise on how to disassemble the rest of the console.
@AandTtate1976 6 жыл бұрын
What a terrific find!! We have a 2002 & 2006 F-150 and both padding pieces have pulled off the console. Can't wait to fix them now!!
@bruceb6262 6 жыл бұрын
just what i was looking for Thanks
@JoseMartinez-qe8oc 6 жыл бұрын
Nice looks good
@SJ-ns4rb 6 жыл бұрын
If you don’t have staples it also works to just use gorilla glue and wrap it with rope all around until it’s cured
@JC_Chappy 6 жыл бұрын
Thanks for the tip. How is it holding up after a couple months?
@stevestonacek7128 6 жыл бұрын
Great video I have a late 2004 F250 with this same problem but when I got the pad off I discovered the clip pattern to be different than yours so I went to the video of the 2001 F250 and that's what I had. So there is at least two different clip patterns so everyone needs to determine which one they have. I warmed every thing up and tacked the pad to the plate with supper glue then warmed the plate up good and stapled the edges figuring that warming the plastic would keep it from breaking when stapled. It came out great and now looks like new. Thankyou for your video.
@padredon7 6 жыл бұрын
Thanks for the update.
@florestom4422 6 жыл бұрын
Thank you very much for making this video it was extremely helpful again thank you for making this video
@adamhall4784 6 жыл бұрын
Very nice video!! Mine came loose when small kids were climbing over the seats, thanks for the help!
@sahralethgo7144 6 жыл бұрын
Great video what kind of staples did you use? I have both an air stapler and electric
@padredon7 6 жыл бұрын
Thanks. I used Senco brand, 3/8" crown staples, 1/4" length.