How good are you at welding?? I wanna do something like this with mine with a front end crown vic and the rear with the special parts to set the leafsprings up higher since its cheaper than buying lowered i beams. And i have no idea how to weld besides simple go kart parts
@bluethunder803410 ай бұрын
I can weld ok but I had a shop box my frame when they put in the Crown Vic front end. I would absolutely recommend the Crown Vic front as it totally transforms the truck in terms of steering, feel, and handling. Best low buck solution for these trucks by far.
@user-hm8xf7ot6y10 ай бұрын
Bad ass truck man, what shifter did you use to mount it further forward? Thanks!!
@bluethunder803410 ай бұрын
Thanks man! The long Hurst shifter had to be modified and welded at the mount point and moved forward to not hit the bench seat. Shortly after this video I went with bucket seats (needed for the fantastic handling that the Crown Vic front brought) and a Barton short throw shifter. Much better!
@user-hm8xf7ot6y10 ай бұрын
@@bluethunder8034 that’s great thank you, currently working on a Vic front end swap on my 73. I eventually want to drop a coyote with the MT82. Thanks again!!
@AngryDogPerformance Жыл бұрын
what is the steering intermediate shaft on this?
@miguelangelnavagarcia8551 Жыл бұрын
hi guys, someone knows where i can get the digital gauge showed in this pick up?
@caseyaylward8853 Жыл бұрын
Did you have any problems with the shifter hitting the seat? I'm thinking about doing this myself and I'm trying to do as much research as possible to figure out any hidden obstacles I might run into. You know how it goes, it's always the dumb shit you don't think of that puts you in a serious bind
@bluethunder8034 Жыл бұрын
Yes I did have to bend my long shifter initially and it worked fine. Since then I went with bucket seats and a short quick throw shifter that I like much better.
@Sprayedbydre Жыл бұрын
Custom drive shaft? I’m using mt82 also with a 8.8 rear end
@tomn78292 жыл бұрын
Nice truck but if you had gotten yourself a good 351windsor and bui!t it it would be a lot less money and a lot more power while staying true to the truck. But to each Thier own. that's what I've done and it works awesome and still rocks a carb...
@JDDOWDY2 жыл бұрын
Nice truck.
@jadarioushoard67372 жыл бұрын
THIS IS NICEEEEE
@mikehall7372 жыл бұрын
I bought a 6.2 f150 raptor engine and am goin to buy a 74 f100 off a guy and I'm going take notes form you.
@gman90352 жыл бұрын
Good gosh that truck is awesome
@johngunn79472 жыл бұрын
What ECM are you running
@ls1_cammeroh2 жыл бұрын
Man I wish I could do this to my 72
@damonhappy90493 жыл бұрын
That truck is perfect for a daily driver. That's a very nice truck I want it
@irenejones693 жыл бұрын
I have a 74 F100 Ranger long bed and I absolutely love this!
@bluethunder80343 жыл бұрын
Thank you so much!
@tailikquarterman2543 жыл бұрын
Beautiful work! How much would you charge to do this exact work for me? Do you have contact information? If so let me know! Thanks brother!
@bluethunder80343 жыл бұрын
Thanks man! I did all the work except the engine swap. That was done by Hot Rod Syndicate in Buford GA.
@arturopardo48203 жыл бұрын
Where i can fine New desk tap for 76 350?.
@Redneckofgaming3 жыл бұрын
What year was the crown vic
@bluethunder80343 жыл бұрын
Pretty sure it was a 2005. Any 2003-2009 Crown Vic or Mercury Grand Marquis should work.
@Redneckofgaming3 жыл бұрын
@@bluethunder8034 cool thanks for the info my do this to my someday
@MARedleg3 жыл бұрын
Reminds me of my dad’s. His was a 76 F100 with the 360 v8 and 3 speed auto. I wish I had that truck now to fix up nice like this one.
@scaven093 жыл бұрын
I honestly didn’t like it... til you started it. I love it now.
@henrygee95013 жыл бұрын
Nice truck. I wish I could afford to do that swap on my '68 f100. Check out my truck kzbin.info/www/bejne/aHfQfoOAi9B8Y6M
@mitchellyardanoff46663 жыл бұрын
I'm not a Chevy or Toyota guy!
@pattreadwell61493 жыл бұрын
Good hobby
@pattreadwell61493 жыл бұрын
Do you have steering problems
@bluethunder80343 жыл бұрын
No, it steers great. Just had to have an aftermarket steering joint to get around the long tube headers. Shortys wouldn’t have that issue.
@skylinemusik13 жыл бұрын
Looks great, did you paint the truck with the trims on or did you have to take them off???
@bluethunder80343 жыл бұрын
I didn't take the trim off. I just taped around it. But, I just use it as a work truck and didn't care. Any really good paint job would remove all the trim.
@skylinemusik13 жыл бұрын
Blue Thunder it looks really good can’t tell you didn’t remove them
@mjthepatriot57414 жыл бұрын
Thats 1 badass truck. Beautiful
@bluethunder80344 жыл бұрын
Thanks man✊
@rmdo55834 жыл бұрын
Simple yet so powerful awesome truck man👍
@bluethunder80344 жыл бұрын
Thank you!✊
@jorgearellano70174 жыл бұрын
on stock chassis ?
@bluethunder80344 жыл бұрын
The chassis is stock other than the Crown Vic front end swap and Cal Trac traction bars.
@gregrice32654 жыл бұрын
Love the stance, is the only front end change the crown vic subframe?
@bluethunder80344 жыл бұрын
Thank you! Yes, its a factory Crown Vic front end with stock height coil springs.
@jdawg873214 жыл бұрын
Hot much you guys charge to due a swap ??
@vbz274 жыл бұрын
Looking to sell?
@theroosterwilliamzz24724 жыл бұрын
Sell??
@matthewatowe20094 жыл бұрын
Round about what did the engine and tranny swap run
@genius-no5sl4 жыл бұрын
Sweet ride !
@Dannyjoemustanggt4 жыл бұрын
That is a gorgeous dentside
@shanerichardson95684 жыл бұрын
Did you do it yourself?
@bluethunder80344 жыл бұрын
I had a Hot Rod shop near me do the Coyote and trans. I did the rear end and interior.
@FFKSnow4 жыл бұрын
Did you have to relocate the shifter? Or is that where the stock shifter sits?
@bluethunder80344 жыл бұрын
The truck came with a column shifted C6 auto, so a hole had to be cut in the floor.
@FFKSnow4 жыл бұрын
@@bluethunder8034 thanks. Im looking at coyote swapping mine with the mt82. I thought I read that the shifter was so far into the cab that people were having to buy a shifter relocation kit. Another grand i dont want to have to spend
@bluethunder80344 жыл бұрын
The shifter would interfere with the bench seat if you have one. I put bucket seats in mine so there is no issue there.
@staticf10024 жыл бұрын
Are you using a 8.8 rear end out of a explorer or still stock 9 inch
@bluethunder80344 жыл бұрын
It's an 8.8 out of a Crown Vic with posi, 3.27's, and discs. It was $100 and works well but it is wide. I'd go with a more narrow rear if you want to fit wider than 255 tires like I have.
@bluethunder80344 жыл бұрын
My truck came with an open rear Dana 44 with 3.00 gears and drum brakes. I swapped it to an 8.8 from a Crown Vic with posi, 3.27 gears, and disc brakes for $100. It is a very wide rear but will fit these trucks with the Crown Vic wheel backspacing.
@boyertb4 жыл бұрын
That is one crispy truck. Love it.
@marcomedina29764 жыл бұрын
I see the BBK headers what about the exhaust?
@bluethunder80344 жыл бұрын
Exhaust is a BBK 2.5" x pipe which flows into Magnaflow 2.5" mufflers with mandrel bent pipes which exit before the rear tires.
@garrettsarchet4 жыл бұрын
I think I seen that truck around
@calebproductions59704 жыл бұрын
No telling how much that engine costs.nice truck.
@bluethunder80344 жыл бұрын
Thanks! The engine was 3K and was pulled from a low mileage 2014 Mustang GT.
@rdd014r4 жыл бұрын
What engine mounts and headers did you use?
@bluethunder80344 жыл бұрын
Robert Davis The Crown Vic motor mounts fit the Coyote perfectly. The 4.6 and 5.0 blocks are the same. The headers are BBK long tubes for a 2014 Mustang GT. I’ll probably switch to some shorter ones eventually so I can lower it just a touch more.
@mustangguy86224 жыл бұрын
That’s cool. I’m thinking of doing that to my 74 long bed. Coyote swap.
@RussellBrosGarage4 жыл бұрын
LOVE the truck! We are building a '77 Flareside 2wd with a 351 - C6 & and 9"
@Contreras-z4e4 жыл бұрын
Chevy camp here we all want this 🥰🥰🥰
@GripItNRipIt824 жыл бұрын
What transmission are you running? I'm currently in the process of a coyote swap on an 02 f150 xl regular cab and I'm going with a tremec t56. Did you have any trouble fitting the long tube headers around shock towers?
@bluethunder80344 жыл бұрын
Trans is the MT82 6 speed manual. Engine and trans came straight out of a 2014 Mustang GT. No issue with the long tubes and shock towers, but the steering linkage had to be fabbed up to clear.
@yamahaxs65014 жыл бұрын
I'm not usually a Ford guy...but that thing is sick! great truck!