Somehow i cant get my 7600x to hit 5450ghz even with undervolt on all cores while in cinebench. Curve -22* -21* -34 -23 -35 -36.
@Celldweller455Ай бұрын
If you're struggling with this still you can cheese him by jumping on top of the site of grace building using the building directly behind it. I recommend walking up to the edge of the site of grace building to summon, then falling back to the building behind it. He can't hit you while you're on these buildings but he likes to hug the wall making him hard to hit while you're on the site of grace building. By falling back to the building behind he is exposed more often to your ranged attacks.
@dominicjrf2 ай бұрын
Question to all 7950X3D OC owners. When setting CPU override to +50 (or any value) in the bios, does your CCD priority break? By default, my CCD0 (v-cache) sleeps most of the time and CCD1 (frequency) does all the workout under idle and normal operation. EXPO1 6000 PBO Enhancement is disabled PBO with Curve at -20 on all cores Core Performance Boost set to Auto Cinebench R23 Multicore MC score 32,848 and Single Core Score 1886 MP Ratio 17.42x Default AMD EDC 180 TDC 120A PPT 162W CPUEater 30sec Duration CCD0 clock @4.8Ghz all core CCD1 clock @5.1Ghz all core stable But when I enable CPU override and set to +50. Now the priority is reversed. CCD0 is active and CCD1 is sleeping. I am so confused
@andremessado765924 күн бұрын
This is a known issue with CPU boost override. Hopefully it should be fixed with BIOS/Windows update but I personally do not have that issue with my 7950X3D.
@kry142919 күн бұрын
hey idea idea about soc voltage do you guys touch that
@Youda000082 ай бұрын
Hi, i could use some help. I followed this guide and gradually raised the curve optimizer numbers and now my game i'm targetting finally crashed. But when i open the Event Viewer and the WHEA filter, it's empty. I manually browsed all the event categories one by one and found not a single event that would talk about CPU or any hardware stuff. Is there any other way to find on which core the game crashed?
@arnabiitmphy2 ай бұрын
Thanks a lot for this video. Just setting the cinebench priority to "real time" gives me 1k improvement in multi core performance. My cinebench R23's priority was set to "below normal" by default for some reason. Now setting it to real time gives a multi-core performance of above 30k, thanks to your video.
@tybino2 ай бұрын
Great guide! Thank you!
@ManyDieTrying12 ай бұрын
deadass i just fucking learned how to fight him over the course of 6 tries, i wanted to cave to cheese but the satisfaction im feeling right now of just knowing im fucking better than him is so good bro
@Yiss83523 ай бұрын
so disabled is the same as setting the default limits manually?
@jawbreaker95303 ай бұрын
thanmk youi
@dontsleephungry7163 ай бұрын
Can you make new video on this for the ryzen 7 7700x?
@gtanerd19993 ай бұрын
How to find best cores?
@rabotanalegke4553 ай бұрын
apic id: 12, ryzen 5800x, what is this?
@kingace4life2203 ай бұрын
Amazing video bro!!
@fdimichele3 ай бұрын
PSA: Don't use cheap extension cables off eBay for your power supply. They will be cooked at 100 watts over time. I have photographic evidence saved so I don't forget.
@antoniocruzramos42863 ай бұрын
This is the best undervolt video i have ever seen, you explain everything and not just give random values for the bios like the other channels.
@lDamnBrol3 ай бұрын
nice informative video bro I do have a 5800x and i managed to set curve optimizer to -30 for 6 cores and then -27 and -25 for the other two, also with a 200mhz frequency boost and it seems stable, weird thing though is that mu CPU voltage on auto is around 1.476V , ain’t it a but too high or is that normal for 5000 series CPUs
@SpartanDraco3 ай бұрын
the voltage depends on the board, no matter what I do it always has 1.4 both cpu and ram, in my case the 5950x, I was looking and is a standard voltage today.
@sporadicentertainment92533 ай бұрын
What are you using to cool the CPU?
@pwn34264 ай бұрын
seems like so much work for such small chance at a small percentage of gain, lol
@echremb4 ай бұрын
this motherfucker harder than every fucking boss in this game
@foxthroat34104 ай бұрын
OMG didn't knew you can log specific cpu crashes 😭 finally TY so much for this!! Actually the best guide in YT hands down.
@Buttertoast11034 ай бұрын
I've scoured the internet for the past 2 weeks for guides and information on PBO2 on these chips, and this is by far the best resource. Thank you!!
@insane25394 ай бұрын
How to do all this using Ryzen Master?
@SeriousPeaches4 ай бұрын
What if you get error id 46?
@tracynation28204 ай бұрын
Super. My railroads locomotive repair crew (Me) has had to turn a number of nice locomotives into parts or dummies. I currently operate nineteen dummy locomotives and I haven't ever bought an unpowered dummy locomotive in my life. Hello from the Tracy Mountain Railway in Colorado. 💙 T.E.N.
@AntonChe4 ай бұрын
Hi there and thanks for the Tutorial! Would appreciate if you could expand on some issues I have there. I try to “Curve” all the cores at once but “Offset” per Core individually starting from the very Max = -30. Two questions I have for now: 1) While testing particular Core with OCCT can other “Curved” cores impact the test resulting in OCCT errors? Maybe I should not touch other cores with CO and “Curve” only one tested Core at a time? 2) When OCCT shows errors - I can’t find it in Event Viewer as you did - nothing is there. ps: I have HPET timer Off in Windows 11 23H2 (Bios - On) - so I use TSC clock + RTC tick (bcdedit: useplatformclock - no / useplatformtick - yes) Big thanks in advance!
@josephjmicallef5 ай бұрын
Hello mate. Thanks for such an easy to follow video! Much appreciated. I’m in the middle of the tuning process (7800x3d). Once you’ve found the limit (negative curves) of all cores at stock power limits and 0mhz, are you only retesting each step with MHZ increases at your previously identified curve ? Or once you raise the mhz in 25 set increments, do you go back to negative 5 and re do the curve? If that makes sense? Also, would there have been a chance that some of my cores could have reached a bigger curve if the power limits and MHZ weren’t stock or is it a good indication that that’s their limit on the curve ?
@michaelf12195 ай бұрын
i ended -30 all cores and boost +150 stable 160 ppt 95 tdc 140 edc all cores runs at 4763ghz when under load one core will hit the 5ghz when testing single core
@alaabahattab5 ай бұрын
you were lucky he bugged into 1 move. When I fight him he goes ninja/viking/kamikazi shit on me with all sorts of moves.
@iceflower70046 ай бұрын
Only problem I’m having is windows event viewer is not recording any of the crashes I experience, so I cant figure out which core is the broken one
@plasmodesma75696 ай бұрын
Spent 4 days on this bastard, probably killed me 200 times. Finally decided to look online for strategies, followed this one and beat him on the 5th attempt :) Thank you! this is the worst field boss by far.
@9ice1736 ай бұрын
The best guide I watched! Thanks man!
@mc_zittrer87936 ай бұрын
Just got done cooking this bastard. Two-handed Icerind Hatchet, Stonebarbed Cracktear and Opaline Bubbletear in my Wondrous Physick, and a bite of Exalted Flesh. My fight didn't seem to go nearly as long as this video did, and I think I even had more DPS since I only got to stun him once. If he managed to maim you, assume that literally the only chance you have to heal is after you stagger him. Take all your dirty tricks into this fight, stay on him, but also learn when to let up. If I can do it, anyone here can, too.
@carlosdominguez31086 ай бұрын
Alright
@TheNerd6 ай бұрын
"Core Cycler" is the most usefull tool to test stability (in addition to let the cpu run idle)
@Donivar6 ай бұрын
Thank you for this user friendly guide. A while ago I spent a whole evening tinkering with PBO and was able to draw 100% the performance marketed with lower temperatures and default and a bit lower power consumption. After watching this guide it took me about 6 restarts before I was able to reduce the power usage by 25%, temperature by 18°C, all while keeping the default performance. I didn't really want to go core by core ro get rhe last bit of performance.
@krisl28387 ай бұрын
Do i set PBO to auto in bios when i use curve optimizer on ryzen master?
@krisl28387 ай бұрын
all of my cores went to -30 5900x
@Raecrisos7 ай бұрын
This provide me as a newbie with more insight I get really tired reading over and watching hundreds of video most just give vague explanation. Kudos and I can do is to sub to your channel!
@dr.hannibal83387 ай бұрын
Lmao why he looks like Jeffery Dhamer😅
@OnitsTV7 ай бұрын
I test my pc with pbo crash it with occ but no show me whea error why?
@InSaiyan-Shinobi7 ай бұрын
What’s the lowest power limit you can go in bios? I’m trying to draw the literal least I did a -30 curve and now I’m just trying to see the lowest power draw then after see if I can undervolt the cpu as well
@ApeBlin7 ай бұрын
What an amazing guide. Really going into depth on the how and why. Thanks to you i've managed to finally make my 5900x stable
@danielhorsburgh8747 ай бұрын
it makes no sense that the core apic ID is 1 in cpu z but he says the apic ID in the event viewer needs to be halved to find the real core and it said core 1 was ID 2 so its a contradiction? EDIT it appears the event viewer apic ID is for the threads, while the cpuz shows a separate ID for cores as well to associate with the thread number which is what the youtuber meant. this was not made clear in the video creating confusion.
@druteron7 ай бұрын
Thank You for this video, it's so informative, yet still beginner friendly!
@AthosRac7 ай бұрын
18:21 you explanation to the APIC ID is great, thanks.
@Chris-kc4qh7 ай бұрын
My Ryzen 5950X all cores run at 3.7 to 3.8 how to fix this. I show everyone all core run at 4.+ Ghz My motherboard is Aorus Master
@danielhorsburgh8748 ай бұрын
What’s the point of manual pbo limits matching the cpu when disabled uses default matching the cpu I believe from your wording?
@thornszk8 ай бұрын
Can't find the advanced option under pbo dropdown
@Gyneco-Phobia8 ай бұрын
Curve optmizer at negative 25 also reduced the usual 1.375V for max clocks down to 1.212V for the same clocks.